Reviews
non-greasy
Vinyl tape is fine, but vinyl tape makes the Cable sticky, so this Binding Tape is used.
It can be used for a variety of purposes, such as cable bundling or at the end of a Colgate Tube.
View detail
Voltage is not measured.
Used to locate power source
LED in Body emits light when voltage is present
It can be checked with one hand, so it's useful in tight spaces.
View detail
Normal.
It is difficult to use by matching both sides to the groove.
I wish I could do well, but I'm not very comfortable.
It is safer and more comfortable to just remove it with your fingernail. -------------------------------------------------- -------- This is hard to use both sides to the groove. I hope you can do it well, but it's not comfortable. It's safer and more comfortable to use your nails. Powered by Google Translator
View detail
Toys for your free time
Hazard & to be easily visible at night View detail
Change from box to bag
It is less bulky and easier to handle than the previous one made of corrugated ball. View detail
Compact
Cost performance product with no expiration date in battery spec. View detail
Cheap and very high quality
Used to move the position of GeneratorCoupler (Wiring extension) in SR(1JR).
I wonder why 1JR has a coupler in that delicate position.
Aside from Type 250 terminals for Coupler, TAB, receptacle8Quantity:This price is quite inexpensive, as it includes a Set.
It is cheaper than KITACO and cheaper than buying in bulk, such as products sold for vehicles. Emon is the cheapest after a lot of research.
There are Chinese CouplerTerminal Sets available elsewhere, but they are not that cheap, and the quality is poor and rickety, so I don't want to use them for the 250 models that are supposed to handle large currents.
Emon is said to manufacture their products in-house at their own FOR JAPAN MODEL factory, so the quality is consistently high and inexpensive. I dislike Emon's Bullet Terminals because they are too high quality and the mating is too hard, but there is no problem at all in this 250 type.
The 250 type for Coupler has a projection on the side of the Male terminal, and the Female terminal has a projection on its back.
This locks the housing, but it is also possible to use a terminal Single Body without housing.
Basically, it is assumed that you have a separate PVC protective Cover, but you can cut the protrusion of the Male terminal so that it does not poke through the protective Cover.
View detail
Purchased to install DAYTONA DUnit and Security Buzzer
I am very happy with the way it fits and if it is too large I can cut it to fit. I will buy it again when I need it for something else. View detail
Convenient
I was looking for a simple type that I can put in my Cigarette because I don't always check the voltage.
It can be used while driving, but with Daytona's Cigarette power supply with lid, the lid that is left open shakes.
LED display is Blue. It is hard to see in daylight.
Body is smooth and sturdy.
I like that it doesn't look cheap.
View detail
Motorcycle with Cowl should buy it before you regret it!
I purchased this product (adjusting for shipping costs) for the installation of a car's drareco.
You can get by without it, but you can scratch it when removing the lining, and it is easier to remove the Clip, so you can do a more careful job if you have it.
Actually, I seem to have made a mistake when removing the Motorcycle Cowl, and there is a spot where I broke a nail before I knew it. I think it could have been prevented if I had used an inner lining remover properly.
By using the inner lining remover, it will be easier to apply force to the nail/Clip part, so I will use it from now on to prevent damage.
If you do not have one, we recommend that you purchase one, as it will come in handy in your tool box.
View detail
I can make it myself.
Purchased to branch power from existing Bullet Terminal.
You can make it yourself if you want, but since it is a power supply, you need to use something like this in case of emergency.
One drawback is that the Wiring color is Black.
Since it is Body ground, it is basically Plus where these things are needed.
I wrapped Red Vinyl Tape around the Wiring.
View detail
Used for S1000RR
I was looking for a Wiring near the Tail Lamp with Tail Lamp, but it seems that some Wiring touched each other "ping", and the Fuse flew out, so I bought it.
This may be the first time I have skipped Fuse in any way. I did some research and found that there are so-so types of Fuse in one word.
Size is Exactly.:1 Set of 3pcs., so you don't have to worry even if Fuse skips 4 more times (although it would be a problem if you skip that many times …).
I think it would be good to have it as a Stock.
View detail
Easy installation
I purchased the Mukawa MF12V1.3Ah to install in my MONKEY50 and was able to install it successfully.
The packaged product fits easily into the electrical parts box, making it easy to find during later work.
View detail
Considering it as a Bullet Type Terminal, this price is ….
The Waterproof Specification is IPX3 etc. level, so it cannot withstand submersion in water, but it can withstand some heavy rain, and I think it will be no problem in places where it will not be directly exposed to rain, such as under the Seat.
However, considering it as a Bullet Type Terminal, the cost of nearly 100 yen per pair seems expensive. If they are gold-plated, I can accept it, but they are just as they are.
View detail
It's got hair in it, and the claws are straight Type.
There was a hair in the inner bag. It's not food or anything, so I don't mind, but it's a little weird.
The claws of the crimping part (Large type) were straight.
I was expecting Emon to have claws that were rounded inward and easy to crimp. I would have preferred to buy a Rose at the local hardware store.
It's free at the Point, though.
View detail
I haven't seen needle GoldHanger lately.
I purchased this product (adjusting for shipping costs) for the installation of a car's driver's recorder.
In the past, we have extended the needle GoldHanger and used it as a substitute when passing through Wiring for installation of Motorcycle's driver's record, etc. Recently, however, the needle GoldHanger itself is not seen very often.
This is convenient for playing with electrical equipment because it is properly insulated and can be easily passed through tight spaces by passing the Wiring through the Wire loop. The needle is not as hard as GoldHanger and is easy to use. It is not expensive and should be kept in your tool box.
View detail
Simple and easy to understand!
This time, I purchased it to check the ACC power supply from the fuse box for the installation of a car's driver's record system. The LED glows red to confirm that power is being supplied. I used it for the first time, but I had no trouble with it by referring to the instructions in the Emon site.
In other people's reviews, it seems that it is often used in Motorcycle electrical tinkering, and I would like to put it in my tool box and use it.
View detail
low price
With other manufacturers, you can only buy one or two at this price, but this is a low price anyway.
When I have purchased from other manufacturers in the past, I was able to buy them one at a time in Rose, but they were packed in a large Vinyl bag.
View detail
Emon USB TypeA
USB port Type A is needed and purchased a reliable Emon product.
The equipment itself is not that difficult to use, just connect the + to the Attachment power supply and the - to FrameEarth.
The reason why we chose Emon is that it is converted to 5v just by connecting Attachment power supply 12v and can be used up to 4.8A, which allows for quick charging.
Demerit has a cap to protect it from dust, but it is not waterproof, so it is safest to use it under the Seat.
View detail
Cheap, safe and easy to use
[How is it used?
When I was working to install YOSHIMURA/Oil Temperature Meter on XJR400R, the attachment wiring was too short to reach DAYTONA/D-UNIT under the seat, so I used this product to extend the wiring and installed it successfully. I extended the wiring with this product and was able to install it successfully.
How was your experience with it?
Very easy to use
AVS 0.50sq is often used for electrical components in motorcycles, so those who often tinker with electrical systems should have one in their tool box.
How did it compare to other products?
Basically, we only purchase electrical components from Emon, but you can easily find them at Home center or other places. However, it is much cheaper to buy on the webike.
[Points to note]
Nothing in particular, but it is safer to use dedicated tools for crimping and crimping firmly to avoid trouble.
View detail