Reviews
Not very good quality.
HURRICANEClamp Bar
Item Number : HU1035B
For YZF-R25
This is a type of handlebar with a fixed bolt to be installed. The supplied bolt and Spacer collar are not strong enough, so we replaced them. The length of the bar is shorter and more compact than other manufacturers.
View detail
I can't reach it.
Six months past the time I placed the order in the first place, and I haven't received any reply.
From a one-way email that delays delivery
Cancellation of order due to lack of Manufacturer.
TV show, video game, etc. that has jumped the shark
View detail
sending a car to look at something
I don't know about the use of the W because it is still shipping to see it after 5 months. View detail
Size is different
I ordered an M6 and received an M5 even though the bag said M6.
I couldn't wait to replace it, so I drilled the holes myself with a Drill and re-cut the screws with an M6Tap and installed them.
View detail
Quality △Hose is burdened.
The Shift Pedal side is easy to install, but the Brake Pedal side requires care. If the hose is installed by force, it may cause cracks in the hose or turn off the Brake switch wiring, which could be disastrous. When I first made a tentative installation, I thought that the Hose Clearance was too much, so I reviewed the Instruction Manual to see if I had bought the wrong type of product. I read the Instruction Manual and found that the Plate is Anodized Finishing. I was able to install mine without any modification, but the quality of the Plate varies depending on the Rose, and some people on the Net seem to have been unable to install it without any modification. The stop-lamp may remain on depending on the position, so it is necessary to adjust the position of the brake pedal after installation. I think that the position is limited to the second level when considering the hose, and I recommend not to use the third level because the brake hose may break while driving. I don't feel good about pushing the brake hoses and brake switch too hard, so I honestly thought I didn't need to put it on. I bought it because of its cheap price, but I regret that I should have bought proper Rear Sets if I had to pay 10,000 yen. I was so cheap that I bought it, but I regret that I should have bought a proper Rear Sets if I had to pay 10000 yen. I have installed the Rear Sets and plan to replace them with Rear Sets as soon as possible. If I keep these on, the Hose will wear out over time and I may have an accident sooner or later. View detail
Hole position is wrong.
After arrival, I started to replace the handlebar.
I was trying to put a Switch box on the Axel side.
The holes in the HandlebarBody on the Axel side are located in different places.
Mirror, etc. did not come on when installed.
In the end, I could not install it and returned it to the original Handlebar.
View detail
Not for me.
I think it's partly because I'm inexperienced, but no matter how I adjust, the Clutch drag happens.
I spent several hours checking the details, but eventually gave up without a cure.
View detail
Fits: YAMAHA DRAGSTAR400 CLASSIC, YAMAHA DRAGSTAR400
I couldn't pimp it
While acknowledging the lack of confirmation ….
The handlebar side plate shape was different, so it could not be popped on, so it was reshaped and reattached using Drill and Disc Grinder.
Well, I guess this is what Universal Product is all about.
View detail
Fits: HONDA CBR250R (2011-), HONDA CBR125R, HONDA CB250F
Don't buy MC41
Blinker cannot be fixed.
Normal fender not to move up and down.
Mounting holes for fixation are Small size?
This product is
The car is not designed to look up or down after driving.
Needs to be corrected. 。 The blinker side is a rubber mount, so it cannot be completely fixed.
We recommend that you buy one from a different Manufacturer.
View detail
It arrived when I forgot about it.
I don't remember when I bought the W.
I thought it was some kind of mistake.
I checked and they said they ordered it about a year ago…w
View detail
refuse
LEDs went out immediately.
One of these days, I'm thinking of putting it on Yahoo! Auctions for $1.
If you'd like.
View detail
HURRICANE, are you serious?
[How is it used?
I purchased this product to prevent Trouble such as rust by plugging the hole in the Cap bolt.
Was the one you received as per Image?
When I picked up the product, my impression was that it would be easy to install by simply inserting it into the hole. Until this time, .....
Was the installation difficult?
As it turns out, it cannot be installed!
The depth of the hole in the cap bolt is 3mm, but the length of the hole plug (the part that fits in the hole) is 4.5mm! I was going to install it on my FZS600, but I suspected that the cap bolt used on Yamaha cars is special, so I decided to install it on another Motorcycle I own, KawasakiD Tracker, SEA BASSRGV250, and SEA BASS RGV250, and I was not sure if the cap bolt used on Yamaha cars is special or not. I tried with the bolt used in the MOTO GUZZIV11LE MANS, but I still couldn't install them all!
How was your experience with it?
3 Pack total 1Quantity:2pc. After much consideration, I decided to shorten the length of the set and use it. However, if I cut it down, the two stoppers attached to the lower part of the neck would be lost, and if I simply set it in the hole, the Hole Plug would fly away due to vibration and wind pressure. The decision was made to adhere them together using the This bond is flexible even after curing, so the Hole Plug can be removed later.
I first thought about doing the shortening process manually, but the quirkiness 1Quantity:2pc. I used my Belt Thunder power tool because I had a GSX400E to do the set as well. With this tool, it is easy to shave in an instant. But I had to be careful not to shave too much.
[Included Parts:were they on?
There is no such thing.
[Was there anything that disappointed you?
It's super disappointing because it's useless as it is!
Other items that would be helpful
Opinion or request to Manufacturer:Mr. HURRICANE, if you sell products like this, you will lose credibility!
View detail
The product I received was different from the picture.
The Cover on the Lever side is not attached.
Different from the product image.
View detail
attachment
It's pricey, but the grooves in the included Bolt are too shallow to bite and hold it securely in place. View detail
not fitting in
The texture is good, but there is a gap between the pipe handle and the end of the pipe handle when tightening it during installation. View detail
Impossible, I didn't receive the product as ordered.
The delivery date was originally late August, so I asked for the delivery to be made after Obon, but they sent it early.
And I ordered the HB0295B-20 product for GSXS1000.
I received HB0295B-30 for Z900RS.
Webike's Staff's Chombo, it's not possible in other Large hand Net shopping!
View detail
Are you sure that's the length shown?
I bought this product of 100mm long because the accelerator wire was stretched to the limit by 30mm up of the handlebar and it seemed to apply unreasonable force.
Long enough to reach Light's Lens when I replace it!
When you line up the OEMs, it looks to be about 150mm long. Definitely not 100mmLong.
It is ugly because it draws a large Loop in front of the eyes even if it is disagreeable because it is not possible to make a Route to turn other because the space that the space that Cable passes through is Limit in Motorcycle VTR250, and it associates with the antennae of the cockroach.
Longer is probably safer, but you're looking at too much leeway.
I'd like to return it, but there's nothing else I can do to change it, so I'll just cry myself to sleep.
View detail
Fits: HONDA CB400SF, HONDA CB400SUPER BOLDOR, Others
For Caution!
The HURRICANEBar handleKIT for zzr1200 says it comes with XS Size, but it does not. Please be careful. I will not buy it again. View detail
Too sloppy in communicating the delivery date.
I placed an order in March, and the day before it was supposed to arrive in May, I had to wait until August for another shipment, and I don't know if I can really afford it.
The product is very attractive.
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
Quantity:Set?
Not at all Quantity:It's not a Set, it's not a Harness extension, it's not a Banjo bolt. What is Quantity:I have to know if it's a Set. View detail