Reviews
Scratch regrets
Delivery and packaging were good, but there were scratches on the product.
Until exchange request
But my effort and time
It's a shame.
People around me said it was a good brand, so I ordered it, but I was very disappointed.
Perhaps because it was an in-stock product, additional products were ordered.
I hope the product is in good condition. -------------------------------------------------- -------- Delivery and packaging status was good, but the scratch of the product Until application But my efforts and time It's a waste. I ordered it because it was a good brand around, but I was disappointed. The additional product ordered is because it is inventory. I look forward to the good product condition. Powered by Google Translator
View detail
Processing required
Installation is by a single Screw in front of the OEM Under Cowl and double-sided tape on the SIDE.
ExactlyDouble-sided tape does not feel like it sticks, so I drilled a hole and used Tie Wrap to hold it in place.
It was like we had to do something creative to stop it.
View detail
Double-sided tape is weak.
I bought it because I wanted to change the cheap look of the transparent plastic cover of the ZrX1200 DAEG Meter, which I had been interested in for a long time.
The double-sided tape was not very adhesive and peeled right off, so I cut a piece of Ultra Strong Double-Sided Tape for Emon's exterior parts in the size of 5mm?20mm and reattached it. Ultra Strong Double-Sided Tape for Emon's exterior parts, 5mm?20mm in size, and re-cut and reapplied.
I chose G Silver and was personally satisfied with the AluminumMount Meter-like look.
Also, there were a few minor issues, such as a gap in the position of the blinker indicator hole and a slight gouge in the hole for the high beam indicator. This is unfortunate because these are not cheap parts.
View detail
I think the things are outstanding.
In my personal opinion, I enjoy how the shape changes from NORMAL because of the two-layer structure.
The upper rear part of the foot rises backward about 3cm to 5cm, and the upper rear part rises backward as well, making the foot look more like a racer from the side. The increased area also makes it easier to get a good knee grip.
Carbon eyes were selected for twill weave.
It's just beautiful. It's great to be able to still have a good looking sc59 that is getting old.
Installation is not so difficult, as it is just a matter of using the double-sided tape already installed on the back side of the product and then snapping it in place.
If you are looking for looks and ease of holding, this is the one to choose.
However, the delivery time is very long. It takes from six months to a year. Only those who can endure the long delivery time should purchase this product.
The company's efforts have made it one month earlier than scheduled, but five months is still a long time to wait.
View detail
Cheesy
thanks for the help 。 This product was poorer than I expected.
The thicker the better. It was Shock because we have had good purchases in the past.
View detail
Well worth the price!
I purchased the OEM inner fender because it is short and the Seat back and Rear suspension are very dirty.
If it is long enough, it doesn't have to be Carbon, but even if it is not Carbon, it is quite expensive, so I decided to go with Carbon.
Replacement is easy, but the push rivet screw on the back of the swing arm must be removed carefully because it is reusable. Push the middle part. It is possible to replace the Swing Arm without removing the Tire.
I drove a little on a wet road, Inner fender effect Large.
It was a good purchase and I thought Parenthesis looked great when I put it on.
View detail
MagicalRacing ChainCover gsxr1000
Magical racing Carbon Chain Cover (twill weave).
Along with the inner and front fender carbon replacement, the chain cover was also replaced.
It is worth replacing the rear tire, although it is necessary to remove the rear tire.
The texture was good and there was no Gap in the Screw hole, Magical racing is the quintessential Magical racing.
View detail
Light weight, slim type Fender.
[How is it used?
Introduced with the aim of reducing the weight and slimming down the shape of the Front Fender.
Was the one you received as per Image?
The design is good and the quality is good. The carbon is a little thin in some areas, but this contributes to the lightness of the product.
Was the installation difficult?
It is easier but better to remove the front tire and work on it.
How was your experience with it?
Design is good as per Image.
[Included Parts:were they on?
Kit only for installation.
[Was there anything that disappointed you?
Compared to Striker's Chain Cover, I felt the carbon was a little thin, but I don't think this is a problem. I think it's fine,
View detail
Ideal for 22 and 23 year spMODEL!
I think it is best suited for the 22 MODEL sp color body.
I think the carbon reduced the area of silver and balanced the color of the car body.
The size feel is JUST right, and the installation accuracy is probably a compound. It is not inexpensive Parts, but the satisfaction level is quite high, and I can recommend it.
View detail
Fender Eliminator Kit for ZX-10R 2016
This product is marked for 2016, but can be used for 2019 models after Minor without problems.
I was looking for a Fender Eliminator Kit that looked somewhat nice in shape and chose this product. It was a bit chunkier than I expected and not as stylish as I wanted it to be, but I am generally satisfied with it. LOL!
This product is available in Black Gel and Carbon etc. Variations are available, but I do not like Carbon very much, so I purchased Black Gel and finished it with Matte Black, a two-component urethane paint. After all, Material:Because it is an FRP product, it was distorted and a little difficult to install.
The Fender Eliminator KitBody has φ6.5 holes in the mounting area, but if you want to put the License Plate and Blinker straight back, the clearance of the holes is not enough. I re-drilled all the holes with φ8 and adjusted them as I went along.
But the above processing is just processing because I am a nervous wreck. If you don't mind, you won't mind at all.
View detail
V-max 1700 under cowl(Twill Carbon)
I ordered it on June 25th... I received a reply that the expected delivery date was October, but I received it approximately 5 months later. Unfortunately, the customs clearance process was complicated, resulting in additional costs and additional freight charges. View detail
Wind pressure prevention, mounting △
as per Title
Nothing wrong with wind pressure protection.
However
Part of the Screen interferes with the Brake tank on STD Handlebar
Light interference when changing the angle of the Handlebar.
Therefore, I changed from STD Handlebar to one with an increased BEET aperture angle, but I could barely get it to a position where it did not hit the tank when the Handlebar was turned off.
Screen and Brake tanks with some Clearance.
In the end, the Handlebar will only feel pulled back, and there will be no height flexibility at all.
Are you sure it's for a specific car model?
The build quality was solid, but the finish around it looked a little crude.
View detail
I am generally satisfied, but I would like to have a larger size.
I like the affordable price and the Grip feel and have purchased several times now.
The size is one size, so depending on the vehicle, one piece may not be enough.
View detail
Parenthesis good!
Since the resin products are combined with each other, the assembly of the three One Side products, including the drilling process, must be done gradually and evenly, etc.
The nut on the upper side of the drilled hole is small in relation to the hole diameter, and since it is made of resin, it is better to use a washer to tighten the nut.
If you take care of that, it will fit Exactly, and the finish is Magical quality and perfect.
I am pleased with how well it matches the body of the car, which was repainted in Black Meta.
View detail
Premium Quality
High quality belly pan. Arrived with poor paintjob likely due to old stock, had to sent it for spraying, which worked fine as i wanted a custom design anyways. The brackets provided are high quality as well. Do note for Spec III, mainstand can't be used with bellypan installed, need it removed then you're able to use the mainstand. View detail
Install for Race
It was installed on a for race vehicle that was converted to brembo's Caliper.
Although the shape of the caliper is different from TOKICO's, we were able to confirm the installation without modification.
Circuit use is mainly used to control Caliper temperature.
If the course in is repeated and the hard brake is repeated, the lever play becomes large.
The remote adjuster is also available to adjust the lever play while driving, but it takes some getting used to on short straights like Tsukuba. 1000ccmodels cannot clink… by letting go of the left hand while accelerating at full throttle.
In the end, it was like using Course in with the Adjuster far away from the start of the run, and then after a few weeks, when Brake came in, it would be in just the right Lever position.
By lowering the temperature of Brake Caliperetc. with Cooling duct, it can be expected to suppress the amount of play change and control the Pad temperature (for Race, there is a certain oxytoc temperature range).
*Confirmation is necessary because some races may be prohibited regulations.
Even if it is not used for racing, it is still a good custom part! is good as custom parts, even if it is not for race use.
The only regrettable point is that the brembo is now hidden lol.
View detail
To!
Plain weave is better Parenthesis than twill weave!
I used to be obsessed with twill weave, but plain weave was cheaper than twill weave, so I ordered plain weave on the spur of the moment and discovered the advantages of plain weave… lol
View detail
It was just as Image.
It was as per Image but … installation was difficult.
I have a hard time installing the Right Side, especially as per other comments.
The back of the Right Side interfered and I really did not want to cut it off, so I used a Spacer collar and managed to install it.
If scraped off, maybe Quantity:Pair (for Left and Right) I think the symmetry will not match. We have to temporarily install it and consider the thickness of the Spacer collar.
Quantity thanks to Spacer collar:Pair (for Left and Right) Symmetry is not a problem!
It rained during the Touring and it worked well to keep rainwater and mud out. My friend who was running behind me also wanted one.
View detail
Not very well finished!
Waited for several weeks (Months), but disappointed with the finish!
There is 1 ventilation "scoop" right in the middle of the right and left piece with unclear, irregular contour cutting and lack of varnish on the cutting edge!
Dear, quite long delivery time, disappointed! But after paying the item price, shipping cost and import taxes! I will lose the amount of quite high import taxes! -------------------------------------------------- -------- Waited for several weeks (months), but disappointed with the finish! There are 1 "scoop" of ventilation in the middle of the right and left room with a clever, irregular contours cutting and gaps of varnish on the edge of cutting! Dear, fairly long, disappointed delivery time! But after the price of the item, paying shipping costs and import taxes! I will lose the amount of fairly high import taxes! Powered by Google Translator
View detail
We're doing it right.
Installed on MT09SP2022.
It is clear that the product was made with thought and consideration for Wiring and Hose.
It is longer in the back than OEM, and the front mounting area has less clearance than OEM, so it can be recommended for those who are concerned about stepping stones.
(However, the Swing Arm still has a Small stone on it.)
Clearance with Tire is also Exactly, so you should not expect to be able to Size up.
View detail