Reviews
Delivered goods cannot use die length, being short. I cannot think the goods according to vehicle type. He never buys this manufacturer's goods.
Delivered goods cannot use die length, being short.
I cannot think the goods according to vehicle type.
He never buys this manufacturer's goods.
View detail
When a hazard was attached to Ninja250R, it was used having changed to the pure relay corresponding to un-[ hazard ]. The light was perfectly switched on like a photograph, it was comparatively cheap, and since there was also no high flasher by speed
When a hazard was attached to Ninja250R, it was used having changed to the pure relay corresponding to un-[ hazard ].
The light was perfectly switched on like a photograph, it was comparatively cheap, and since there was also no high flasher by speed change, it was dramatically satisfied at the beginning.
However, condition that a blinker begins to keep being exactly attached after a half moon (it does not blink) appeared.
If the relay circumference is struck lightly, it will be repaired temporarily, but if it passes for a while, it will be in the same state.
It seems to be an old tv completely.
honest, since many directions which are the same situations also came when referred to the net -- we cannot recommend you this product.
If this condition considered to be weak ? by the impact has been improved, it will become five stars also in capability also in cost.
.
.
View detail
Fits: YAMAHA TW200E, YAMAHA TW200, YAMAHA TW200
since die length is not known unless it is clearly short as compared with an original manufacturer's product and opens, returned goods are not made, either -- the minimum -- they are the worst goods.
since die length is not known unless it is clearly short as compared with an original manufacturer's product and opens, returned goods are not made, either -- the minimum -- they are the worst goods. View detail
Fits: KAWASAKI KX65, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI KX125, KAWASAKI KX250, KAWASAKI KX250F, KAWASAKI KLX250, KAWASAKI D tracker, SUZUKI 250SB, KAWASAKI D-TRACKER-X
Although purchased before half a year here, about one drop of oil leaked from near the drain bolt in 2 or 3 days after a wearing time, and it had fallen on the ground surface. Even if it thought that it was the cause since the washer was used about, b
Although purchased before half a year here, about one drop of oil leaked from near the drain bolt in 2 or 3 days after a wearing time, and it had fallen on the ground surface.
Even if it thought that it was the cause since the washer was used about, but it uses a washer as a new article at the time of an oil change, oil has fallen on the ground surface similarly in 2 or 3 days.
When it thought that this was amusing and having been investigated over several days, it turned out that oil leakage fastened and it has come out from the hole which was not from a lump portion, and was vacated in order to let a wire pass.
Like a picture, the hole which lets a washer pass although the bolting portions of an oil pan and a drain bolt have not got wet in oil at all was closed in oil, and the drain bolt bottom has got wet in oil.
It was not, even if it thought that oil leaked from this portion by no means.
Although the price was probably cheap, the same goods were purchased with one more there being nothing, but when it became a part for two, naturally it attached more highly than the product of the other company.
If it is right since it naturally will not usually be in oil leakage, it is cheap with a magnet at this price.
I whose fate was bad end up rebuying, and am a product one star.
View detail
Fits: SUZUKI Address V100, SUZUKI Address V100
It is used for the address V100. Although it is two layers, coarse Sakka and fine Sakka, similarly and expected that it was pure comparatively [ with a cheap price ] ... Although it may be individual specificity, a size is [ more than round ] large, a
It is used for the address V100.
Although it is two layers, coarse Sakka and fine Sakka, similarly and expected that it was pure comparatively [ with a cheap price ] ... Although it may be individual specificity, a size is [ more than round ] large, and it will be distorted if it puts in.
It is the shin without liking to use for its own motorcycle, although it can use.
It is wonderful in why a size is different like this.
Probably, it is not cutting manually.
Although the construction material of an element is a thing which does not seem to be so bad, since a size difference is decisive, it is the minimum evaluation.
View detail
Since it was the purpose to make a car body slide to the last, and to make a vehicle main part slide to an escape zone on courses, such as a circuit, at the time of a fall, the skid pad attached until now had a question in engine protection. Then, it
Since it was the purpose to make a car body slide to the last, and to make a vehicle main part slide to an escape zone on courses, such as a circuit, at the time of a fall, the skid pad attached until now had a question in engine protection.
Then, it is although exchanged for this product with a sub frame function.... Attachment is fixation by a fixed + engine lower frame with a screw at an engine mount portion on either side.
However, although the screw stop to the engine mount portion on either side was satisfactory, they are not goods which right and left have about 5~10 mm of gaps, and fixation with a lower frame can use also for a compliment for treating as a sub frame.
They are goods which hurt their frame and worsen it rather.
Although an engine may be able to be protected, it may put a burden on a frame and may have an adverse effect on travel performance.
especially -- the time of breaking -- right and left -- since either may pass, the recommend of the engine performance is carried out only to the direction of not asking at all, by appearance serious consideration.
View detail
Fits: KAWASAKI Z900 (KZ900), KAWASAKI Z750FX, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1000 MkII, KAWASAKI Z1000, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1 (900SUPER4), KAWASAKI Z900 (KZ900), KAWASAKI Z750FX, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1000 MkII, KAWASAKI Z1000, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1 (900SUPER4)
Since the rubber had been prolonged, it exchanged, but it has gone out in three months. It was the touch which deteriorated on the whole. Although early appearance seemed to be satisfactory, I would like to have come to suspect whether a raw mater
Since the rubber had been prolonged, it exchanged, but it has gone out in three months.
It was the touch which deteriorated on the whole.
Although early appearance seemed to be satisfactory, I would like to have come to suspect whether a raw material has a problem.
View detail
Although it also felt that there was nothing although a price will be a price, appearance was also cheaper and attachment was also serious (when devoting itself, the thumb is struck, and a blood blister is ...).
Although it also felt that there was nothing although a price will be a price, appearance was also cheaper and attachment was also serious (when devoting itself, the thumb is struck, and a blood blister is ...). View detail
It attached to the ape 100. Although prediction was carried out from the catalogue size, back cannot be seen at all. Although the thing with short stay was found, the range to which it is reflected since it is reflected comparatively [ with a smal
It attached to the ape 100.
Although prediction was carried out from the catalogue size, back cannot be seen at all.
Although the thing with short stay was found, the range to which it is reflected since it is reflected comparatively [ with a small specular surface ] actually more greatly does not blur and become useful by vibration narrowly.
Moreover, finishing also had a bali bad.
But appearance comes like a mini bike and is delicate.
View detail
I think that it is the thing carried out perfectly as a sticker. It is vinyl and a design logo is also good. However, since some pasteboard of a sticker cannot be found as a picture, garbage stuck there and adhesive power has fallen. Moreover,
I think that it is the thing carried out perfectly as a sticker.
It is vinyl and a design logo is also good.
However, since some pasteboard of a sticker cannot be found as a picture, garbage stuck there and adhesive power has fallen.
Moreover, since it is a transparent portion, garbage dirt is also conspicuous.
If it is the sticker which followed by OMAKE, and it is 20 yen goods, a complain of 10 yen is not made, either, but I am sorry for such a coarse portion to be although it is the sticker purchased specially.
View detail
Fits: HONDA STEED400, HONDA STEED400 VSE, YAMAHA DRAGSTAR250, SUZUKI BOULEVARDC50(Intruder Classic800/C800)(VL800), SUZUKI Intruder Classic400, KAWASAKI VULCAN800, KAWASAKI VULCAN400II, KAWASAKI VULCAN400, KAWASAKI ELIMINATOR 250V, HONDA MAGNA(V-TWIN MAGNA), HONDA STEED600, HONDA STEED600, HONDA STEED400, HONDA STEED400, HONDA Shadow slasher750, HONDA Shadow slasher400, HONDA SHADOW400, YAMAHA DRAGSTAR400 CLASSIC, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR1100Classic
It purchased and has equipped in December last year. It was, while the smell to which a plastic will burn in January, this year ran, although a reason was not understood, either but was left as it was, it was a new bulb, but the direction of the down
It purchased and has equipped in December last year.
It was, while the smell to which a plastic will burn in January, this year ran, although a reason was not understood, either but was left as it was, it was a new bulb, but the direction of the down went out.
In order to check, when Wright was opened, a coupler and wiring burned and melted and it was in the charred state.
the manufacturer was asked and insides were exchanged -- it was given.
However, it will enter in September and will be in the same condition.
The coupler was in such a severe state by the half this time that it melts and collapses.
Wright's design itself -- it will be useless.
Wright had better not choose only by a design.
View detail
Although the quality of a product may be satisfactory, since there was no size notation, the place guessed and purchased from product number was a gap. An inside diameter and an outside diameter should be written like other manufacturers.
Although the quality of a product may be satisfactory, since there was no size notation, the place guessed and purchased from product number was a gap.
An inside diameter and an outside diameter should be written like other manufacturers.
View detail
The measure against water proof is appropriate anyhow. Although rubber packing is inserted into the rear plate, it is standard and is already shifted, and it is also the rectified last configuration and is full of crevices. And it is anyhow poor s
The measure against water proof is appropriate anyhow.
Although rubber packing is inserted into the rear plate, it is standard and is already shifted, and it is also the rectified last configuration and is full of crevices.
And it is anyhow poor structure of it burying by a caulking agent in the crevice, and being [ deceive and ] in it afterwards, etc.
Although the circumference of a lens is also processed with the caulking agent, it could be called the level which there are a thick part, a part of the one skin, etc. and has been set to normal use and out of which a gap problem comes.
Cautions are required, to are unreserved and attach the main part itself.
View detail
Fits: SUZUKI DR-Z400SM, SUZUKI DR-Z400S, SUZUKI DR-Z400 SM, SUZUKI DR-Z400 S, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, SUZUKI DR-Z400 SM, SUZUKI DR-Z400 S
Although DR-Z 400S was purchased, it not being needed for a throttle holder as it is, the metal fittings (banana) by the side of an axel throttle being too long, and the degree of setting angle having bent, and deleting with a grinder file etc. needed to
Although DR-Z 400S was purchased, it not being needed for a throttle holder as it is, the metal fittings (banana) by the side of an axel throttle being too long, and the degree of setting angle having bent, and deleting with a grinder file etc. needed to be processed.
Accuracy is past low however cheap it may be.
View detail
this product -- it was very pleasing until it broke. That Locke of the front brake can be carried out found it useful very much, when stopping to the time of maintenance, or a slope. Locke can be carried out simply and a rear carrier is equipped d
this product -- it was very pleasing until it broke.
That Locke of the front brake can be carried out found it useful very much, when stopping to the time of maintenance, or a slope.
Locke can be carried out simply and a rear carrier is equipped during a run.
If it can carry freely and stops with CHOI, Locke of this level also thinks that he is satisfactory.
It purchased and the key stopped however, closing in round four months.
If a key is put in and pried forcibly, it will be closed somehow, but it will separate in a certain rhythm.
I think that it is fatal as a security lock thing.
I will think ..., if quality avoids to a slight degree.
View detail
Fits: SUZUKI ADDRESS110 CF11A, SUZUKI STREET MAGIC 110 CF12A, SUZUKI STREET MAGIC 110 II CF12A, SUZUKI ADDRESS110, SUZUKI STREET MAGIC 110, SUZUKI STREET MAGIC 110 II
It is the feeling betrayed thoroughly. They were parts which can be declared that the one purer 100% was Massey.
It is the feeling betrayed thoroughly.
They were parts which can be declared that the one purer 100% was Massey.
View detail
Fits: YAMAHA JOG [jog]., YAMAHA JOG-ZR [JOG]., YAMAHA JOG [jog]., YAMAHA JOG-ZR [JOG].
A suction noise is a little smallish for philharmonic power with a cover. There is merely little absolute quantity of intake air. If it can say and a surrounding cover is removed, it will inhale considerably. However, as a variable type, it is
A suction noise is a little smallish for philharmonic power with a cover.
There is merely little absolute quantity of intake air.
If it can say and a surrounding cover is removed, it will inhale considerably.
However, as a variable type, it is meaningless. -- Suction at the time of the maximum is past [ wrong ]. -- If it is this, the direction of a normal air cleaner calls it a suction amount, calls it the sense of stability in case of rainy weather, and also regards Power as good.
He has returned philharmonic power of a kijima who had stuck from the first after all.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
O A number goes up and feel it refreshed. (natural) (1) accuracy is too bad. The way of TAMIYA model 1 / 12 scale (3000) says too much, and the catchphrase that the same space as (2) STD where the crevice between it and the tail lamp with which a
O A number goes up and feel it refreshed.
(natural) (1) accuracy is too bad.
The way of TAMIYA model 1 / 12 scale (3000) says too much, and the catchphrase that the same space as (2) STD where the crevice between it and the tail lamp with which a precision screw-thread mounting hole shifts too much, and a hook becomes slanting was not enough, it rubbed, and the crack was attached is is !.
(3) I think that the idea that the accuracy of an external article is bad and it is natural is amusing in spite of the crevice between it and a cowl being large and asking for and exchanging the thing more than [ which will fall if a fine thing is put in (since a load will fall if that there is an accessory case cannot enter here) ] pure.
In this accuracy, it does not become a talk at this price! I am pleased if it becomes reference of Ho who thinks will purchase this product.
View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
Some bolts to fix are round and a wire adjuster has small rust. Or [ being reasonably priced ] ....
Some bolts to fix are round and a wire adjuster has small rust.
Or [ being reasonably priced ] ....
View detail
It is honest comment that clearance has not become at all. You took the die of the tank perfectly, and did it mold so that it might be suited? Double-stick tape is stuck that there is no crevice in the circumference of a pad flesh side, When the p
It is honest comment that clearance has not become at all.
You took the die of the tank perfectly, and did it mold so that it might be suited? Double-stick tape is stuck that there is no crevice in the circumference of a pad flesh side,
When the paper of double-stick tape was extracted and it stuck with exactly, having united the location with the sheet side lightly at first, and pressing down the fill opening side then, although it was going to unite with PITARI, the crevice was made at both side portions.
It is in the state where it has floated with POKON without the sheet side's stopping suiting shortly when it stops little by little from the stuck fill opening side, and being caught in the crevice between a sheet and a tank in order to take up the crevice.
While PITARI did not suit even if a few was before shifted from the beginning, or the root was stuffed into the crevice between a sheet and a tank and it united from the bottom, but redoing repeatedly, double-stick tape became useless and was not attached after all.
The double-stick tape of ? marketing will also be attached if what was necessary was just to have made it more smallish about 3 more~5 mm on the whole, and,
Although I think that I will carry out buying new one and sticking next without a crevice by giving up because the place [ of the joint of a sheet and a tank ] and fill opening side is stuck lightly, is it serious to remove ..., in advance the torn double-stick tape from a pad flesh side?
View detail