Reviews
It is difficult for those clumsy to install
First, Design was good and it was good that Knee grip became easier.
Although it is an installation, Double-sided Tape is troublesome in case you have to paste it yourself.
The back side is smooth and easy to paste - - - (^-^;
Because I am clumsy, I tried it together before putting it on, but it interferes with Seat a bit.
If you give it above, it will be difficult to open a gap near with Tank Cap.
I removed Seat and installed it, but after all it seems that Seat is not getting attached to me.
Although there is no image, it is like a person who is attached to Tank Pad of Green who is coming earlier.
So, even if you scrape down the bottom part, it interferes with Seat a bit but Seat itself managed to install it.
I want the Instruction Manual.
I always thought that it was clumsy.
View detail
It is high, but it is firmly Carbon.
Difficult to install with the same model etc.. I saw the imprint, I was concerned but I bought it carefully, like Design.
Product (Material : Plain Weave CarbonType) seems to start making after ordering, it took about 3 weeks, but it arrived in about 2 weeks.
Immediately opened, I feel that the first impression is "thin", and taking it is very light.
s1000rr 2016 year formula (Although it is Chinese Cowl) Although it was attachment to the Screw hole, it fitted well, and I fi t firmly to Tank.
Because of the nature of the product, the Instruction Manual says that some error occurs in each Cowl, and there is some error in the vehicle Body even in the same model, so it sometimes needs correction There..
Recommendation to purchase on understanding it.
View detail
worst
A word.
Impossible to install.
Hello Manufacturer, how do you manage?. It is Objection !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
View detail
It is unreliable
Purchase with Race use. The distance between the front and rear of the mounting Screw part is slightly different, and when it is attached, the Bottom case turns and the Axle Shaft does not enter. RubberRing comes as an installation Spacer, but it is meaningless if it is crushed with Rubber.
It is necessary to make Color according to Clearance.
It is not recommended for beginners.
View detail
Eventually
I removed. Various defects. I am sorry that it is like this for the price. It is attached using OEM's Bolt, but Road clearance is bad, it gets over with a slight step, and the result Bracket broke. View detail
White blur has come in..
Clear paint has deteriorated White by about 2 months after it is attached to the car body.
I want to be honest returned goods!
In the future this manufacturer will never buy again.
View detail
Great looking piece
great looking one eye, looks even better if you paint the two pieces different colours. mine doesnt fit %100 because my H bar is a bit bent and warps the fairing a little but still very impressed with how great it makes my bike look. View detail
Attention to Rear brake
I installed it in HORNET 250. Black Gel As it is, I think that it can be used without problems until it fades. The installation was easy without having to remove the Tire. However, since Brake hose interfered with the corner of Fender and Brake's handedness became worse, I handled the interference part with File and handled it. Design likes it because there is a difference with other Manufacturer's Rear Fender. View detail
It is quite good!
I purchased from the other Manufacturer 's Under Cowl that it was made for a long time.
If you remove Tire, it will be easier...
I installed it with lining clothes because it is a pain..
When the car bounces, it will inevitably interfere with the Accessory Case under Seat.
Because each one gets scratches, I cut off the bicycle Tube and stick it at the interfering position.
A little price is stretched but I think that it was good shopping.
View detail
High but fair.
Woven structure is satin weave and secured strength Material : It is carefully made with FRP.
Although there was a description that recommends painting when using it in the manual, I think that it is difficult to use in unpainting because the surface is full of scratches in Gel finish.
However, because it was within the assumption, after polishing with a paper of # 800 to 1200, Primer treatment was done, and matted paint was done by painting three times, and it installed.
I think that the assembling accuracy, finish is a good one.
The manual is very unfriendly, but those who have experienced Cowl's snare will snap off.
License lamp is OEM diversion, Included Parts : Only four Bolt.
I felt the price was honest and high. I think that about 10,000 yen is a reasonable price.
OEMFender fixes 6 Bolt, this product is fixed with 4 pieces.
I seemed to forget regular closure, so I fixed it using Screw lock.
License lamp In the back and under the Seat Wiring hole is Cokingetc. It seems better to process Waterproof later by.
License lamp, Wiring of Blinker will be cured with Corrugate Tube.
It takes time and effort to build up cleanly.
Well, is not it a reasonable product.
View detail
We purchase ZrX1200DAEG from now
I attach BEET's MASARTR 3D Racing Type Exhaust System to this,
Please advise if Under Cowl can be equipped Ad Vise thank you..
View detail
Fits: HONDA RVF400
Worried about Damage to Cowl
I arrived on the day before the 8th tomorrow was done at Suzuka and I am glad and went to Solo touring on the next day installing.
After running for 5 hours back and forth in summer hot summer, Damage from Cowl was attached since installing, so I tried removing it
Although it is not enough to peel off the paint, it rubbed somewhat with Cowl.
If you want to attach it all the time, you must use the scratch on the side of Cowl in preparation.
Although making is not complicated, it is better to be careful when installing as there are scraps etc. in some places.
I recommend that you use the basic, painted and used, but I think that it would be OK if you just think that Black is good.
View detail
Gold amount is - - -
Actually I wanted Carbon but the amount of money FRP
This price is the best because it is good at making this price.
S1000RR (15) I can not install without removing Inner cowl, but I cut off the Inner cowl and attached it.
OEM Product I want to see the atmosphere is good.
View detail
It will be Race ish at once !!
Because we want to approach 400R as much as possible for installation Mounting Bolt and Rubber Damperetc. I used the 400 REM Product, but some Bolt was out of production, so I prepared a Bolt of the same length at Home center. First of all, in order to install RubberDamper protecting Mounting Bolt hole, I extended the hole to 14 pie.
With that and Single Seat installation, I thought that 400R Seat rail was necessary, I got a used item at Yahoo auction, but it was not necessary. Even if 400ROEMFRPSeat, SeatRear 's Pad can be attached and detached with Seat' s attached Key cylinder operation, and seems to be structured to be accessible to Accessory Case from there, but Saitaniya 's In case of Sponge padPaste Type, Seat removal is necessary to access Accessory Case.
From that point on, you can install it only by removing Tandem Footpeg, Tandem seat mounting hardware, Tandem seat desorption key Cylinder.
After that there was no particularly difficult place, installation on Smooth was completed !!
I also wrote it at the time of Impression of FRP Upper Cowl, Under Cowl, but Saitaniya would like to thank Mr. Saitaniya for the Lineup of the For StreetFRPParts of the vehicle that has been 17 years old since it was discontinued.
View detail
Satisfied with Cost performance
Material : In most cases, FRP products, mounting holes etc.. Although it is necessary to fine adjust the mounting hole Expansion of the mounting hole Largeetc. We made a fine adjustment of.
I think that the whole product Quality is satisfactory. I appreciate just being able to lineup the For StreetCowl of the vehicle 20 years ago.
View detail
Satisfied with Cost performance
For Fitting installation hole expansion Largeetc. It was necessary to modify. Material : I think FRP products need some processing and I think that Level is acceptable as I recognize it. Others There was no problem with the overall construction, but one disappointing place on the mating face with Upper Cowl Quantity : Pair (for Left and Right) Both had distortions.
I wanted to fix it, but I did not have that technology, so I left it as it was - - - - - - - -. I am pretending I do not see it now. However, compared with the time when ZXR was the current vehicle, the population of Motorcycle dropped, then at that time there were about as many stars as FRP Cowl Production Manufacturer was out of business, please lineup the For Street FRP Cowl of the vehicle 20 years ago I appreciate being there..
View detail
Fits: HONDA RVF400
8 Image resistant
For this Motorcycle, this Number Seal Cowl suits you well. Since this product is in Black Gel state, it can be used as it is, but it was subjected to ground processing, subjected to Black Painting and Clear finish and worn. However, there is quite a gap on the Air duct side. From the beginning, there was a gray color net in that part, but since it seems to make no sense, it was removed.
(Upper Cowl seems to be scratched) I usually run with Twin Light instead of Single Light.
View detail
Racing cowl mounting accuracy of YZF R15 is good
Though I thought that holes were out of Cowl outside the company,
There was not such a thing at all.
Even just making Cowl of Minor YZF R15 still appreciate.
View detail
Mounting on NS-1
The goods reached, painted in the same color as Motorcycle.
Although it was good so far, my Front stabilizer is installed in my Motorcycle, but it interferes with this product !!!!!
There is no choice but to give up either !!
I bought it a lot newly, so I removed Stabilizer. To be sorry
View detail
It is a good item.
I bought it for installation on my car NS - 1, ordering and the delivery date is too long for a while, I was tired of waiting.
The item that I received was as shown in the picture image, but handmade !! Material : It can not be helped because it is FRP.
Painting completed, installation completed, it was easy to install.
When compared with the appearance before installation, it became Sporty, satisfied !!
View detail