Reviews
Fits: SUZUKI DESPELADO, SUZUKI BOULEVARD, SUZUKI MARAUDER, SUZUKI VANVAN, SUZUKI TEMPTER, SUZUKI INTRUDER, YAMAHA Ensiter 125, SUZUKI SAVAGE, YAMAHA FZX750, YAMAHA XV950, YAMAHA R100 ROADSTER, YAMAHA VIRAGO, YAMAHA XV1900, YAMAHA DRUG STAR, YAMAHA Bolt, YAMAHA SR400, YAMAHA SR500, HONDA CTX700N, HONDA CB650, HONDA DREAM
Good cost performance for the production
I think the quality is high for the low price.
The body is a rather heavy gold, and the lens cut is a bit stylish.
I think that the cosmetics of inexpensiveness in relation to price is the strongest.
View detail
Fits: KAWASAKI NINJA2 Helmet50RR, HONDA CB223S, HONDA CB400SF, HONDA GB250 CLUBMAN, KAWASAKI KSR-1, KAWASAKI KSR-2, KAWASAKI ZX-10R, KAWASAKI ZX-6R, KAWASAKI ZX-9R, KAWASAKI ZZR1100/ZX-11, KAWASAKI NINJA400R (-2013), SUZUKI GSX1100S KATANA (KATANA), SUZUKI GSX250S KATANA, SUZUKI GSX400S KATANA, SUZUKI GSX750 KATANA, SUZUKI GSX-R1000, SUZUKI GSX-R400, SUZUKI GSX-R600, SUZUKI GSX-R750, YAMAHA R1-Z
Cospar good
First of all, the cosmetics are good. I have no problem with it. I thought it was a very kind construction with markings to guide the positioning when installing it, but I do not recommend it to those who are concerned about markings. View detail
Fits: Others , HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X, HONDA PCX, HONDA FUSION
quite good shape
Mirror was rusted out and replaced with a more recent form.
The navigation is easy to see and the design of the Mirror makes the vehicle feel like it has been exposed.
There is no runout when driving.
View detail
It is made of cast metal and has a sense of weight.
For security purposes, such as when staying overnight on the road
It is recommended to use Reminder Cable for installation.
If you run with the disc brake installed, you will not be able to avoid breaking the disc brake or standing on the ground.
When the key cylinder is pushed in once to lock the door, it beeps once and the AlarmMODE is activated when the door is locked.
If you push it in once and it beeps, then push it again without locking the door, it will beep twice and the Alarm stop mode will be activated.
If you are concerned about sound, such as in a residential area, you should set the Alarm stop MODE.
View detail
Fits: HONDA CB900, HONDA CBR250R, HONDA CBR250RRR, HONDA VFR400R, HONDA VFR400R Pro Arm, その他 , HONDA AX-1, HONDA CBR400F, HONDA CBR400F F3, HONDA CBR400R AERO, HONDA FT400, HONDA FT500, HONDA NS250F, HONDA NS250R, HONDA NS400R, HONDA VFR400Z, HONDA VT250F SPADA, HONDA AX-1, HONDA CBR400F, HONDA CBR400F F3
Bolt
Bolt rusted instantly, but otherwise satisfied. View detail
Fits: HONDA BENLY50, HONDA DIO110, HONDA LEAD125, HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X
The atmosphere has changed completely and it has become Sporty!
It is perfect for YAMAHAGRAND MAJESTY, easy to install, no problems, wider field of view, increased safety, and most importantly, Parenthesis is great! View detail
Fits: HONDA BENLY50, HONDA DIO110, HONDA LEAD125, HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X
Prices are low, but
Purchased for the design, visibility and price.
No instruction manual is included, but only a bolt and spring washer are needed for installation.
I installed it on a GSX-S125 '23, but first of all, the bolt hole on the Mirror is too small for the Washer to fit in.
Bolt is too long and Mirror is fixed when installed with Bolt alone.
I had to cut off the screw threads.
Please check the length of the lower hole of the car body to be installed and purchase the product.
View detail
It was impossible to install on CF4EA without modification
I installed it on a CF4EA, but it interfered with the WireGuide that unlocks the Seat and could not be installed without modification.
We responded by sanding the interfering parts.
View detail
Fits: Others , HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X, HONDA PCX, HONDA FUSION
Better than OEM
Replaced because OEM is too hard to see. Installation was easy. I can't say how visible the OffsetHolder is since it was replaced at the same time, but it is more visible than the NORMAL. View detail
Fits: YAMAHA Cygnus X (SR44J) Rear, YAMAHA Cygnus X (SE44J) Rear, YAMAHA BWS125, YAMAHA BWS125, YAMAHA Cygnus X, YAMAHA Cygnus X
Rear brake lining (OEM equivalent) Keisensha 1~3 type
[How is it used?
I bought it this time for the 3RD jade game as a countermeasure against the expiration of my points.
Except for the Jingjing battle, it can be used for FLAME-X and BW'S125 and GTR125, which share the same EG.
Was the one you received as per Image?
Image (Gold) It was Silver.
The box is too big for shipping.
Was the installation difficult?
It would be super easy, but would require some maintenance skills.
The tightening torque for the rear wheel center axle is about 10 kg. A torque wrench is required.
How was your experience with it?
No difference between OEM and Large. Low cost and usable. Cost-effectiveness is the top priority.
[Included Parts:were they on?
The spring quantity is the same as the spring quantity of the other company's product.:No 2pc, but not particularly troublesome.
[Was there anything that disappointed you?
The friction material used is different, so the bite during braking is inferior to that of Daytona.
I don't really care about it because it's price-applicable.
View detail
Fits: Others , HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X, HONDA PCX, HONDA FUSION
grown-up (man)
Replaced OEM for better rear visibility. View detail
Fits: その他 12V car
dark
The Front as well as the Rear are dark.
It is actually rated ??1, but I changed it to ??2 to account for the fact that it is being changed to a Smoked lens.
View detail
Fits: Others , HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X, HONDA PCX, HONDA FUSION
Wider.
Good because the range is wider than OEM View detail
Horn Replacement
I'm not sure of the effect yet, but it's a hell of a lot better than the pathetic sound of NORMAL. View detail
Cute rounded Tail lamp.
[How is it used?
I had made my own Fender Eliminator and used a DRC Tail lamp to refreshen the Rear area of my KSR-II, but I felt that it did not fit the round Image KSR and was looking for an alternative product. I was looking for an alternative when I found this product on Webike.
Was the one you received as per Image?
I think SPTakegawa had a product of the same design when LEDTail lamps started to appear in the world....
I remember that the LED bulbs were expensive and they were prone to break easily, so I had to replace them because they looked shabby and the glowing parts were gradually diminishing.
I remembered this after purchasing the product, but I installed it with a positive attitude, thinking that the reliability must have improved over the months that had passed since then.
The product is more than Image.
Was the installation difficult?
In my case, I made my own Material:Since the work was to install the Fender Eliminator on an aluminum Fender Eliminator bracket, drilling and wiring were performed on the Fender Eliminator side of the self-made Fender Eliminator (only the Tail lamp was used, not the Plate attached on the back side). (Only the Tail lamp was used and the Plate attached to the back side was not used).
This product is Universal Product. So I think Large, Small, or this kind of processing will be necessary.
After installing it on the Fender Eliminator, all you have to do is connect the wiring of this product to the wiring for the tail lamp on the body of the vehicle, but this product does not have the wiring that is often found in this type of product. "Bullet Type Terminal Spec
Modern motorcycles have connector terminals, so it is easy to find a connector that fits the harness side of the vehicle at KITACOConveniencePartsetc. and modify it to make a simple connection.
Fortunately or unfortunately, most of the terminals that connect to each light in KSR-II are Bullet Type Terminals, so it was possible to connect them with a small modification.
How was your experience with it?
The LED bulbs have not broken out like previous similar products mentioned above, so the functional part of the product has not been a problem so far (observation required).
My personal impression is that the rounded design of KSR and the slightly old-fashioned design of this product match each other and seem to fit together strangely.
[Included Parts:were they on?
It was a Simple Package with only a Tail lampBody, UniversalPlate, and a simple Instruction Manual.
[Was there anything that disappointed you?
Not at all.
I hope it is durable.
Other items that would be helpful
Point and hang of installation
This product is Tail lamp and UniversalPlate is Quantity:The play is a set product, but it should be considered only as a bonus, and you need to image how it can be installed in a good (or safe) manner in the vehicle you want to install it in before you start the processing. I'm thinking, "Huh? Maybe I should have mounted it a little higher (or lower)?" You may end up redoing the work because you are not convinced like I was (I'm not half disappointed...).
[Availability and clarity of the Instruction Manual
A simplified but illustrated Instruction Manual is included.
[Notes]
Nothing in particular, just be careful not to misplace Wiring.
[ITEMS TO BUY TOGETHER
As I mentioned above, it is sold by KITACO and others. OEM Type Connection Terminals by Manufacturer will allow one-touch connection to Harness on the car body side.
Since the method of fixing to the car body varies depending on the car model, it is better to try a temporary assembly before full-scale installation.
First, check the fixation method by placing it on the vehicle in which you want to install it.
[Opinions and requests to Manufacturer
Please keep up the good work in maintaining prices as much as possible and keep selling for a long time to come.
View detail
Fits: Others , HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X, HONDA PCX, HONDA FUSION
Mirror
The Mirror is very easy to read and the large size is very comfortable and satisfying. Thank you very much. View detail
Fits: Others , HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X, HONDA PCX, HONDA FUSION
V125S Screw (forward/reverse) must be confirmed
MyMotorcycle V125S Mirror was selected from the hit items in the search from the state that had been set to
Hit, 10mm Normal Thread Screw But when I actually tried to attach it to the vehicle, I found that it was 10mm Opposite Thread Screw was
By year etc, Positive/reverse." It is always better to check the direction of the Screw on the actual car, as there seems to be
As a result, we purchased an additional Conversion Adapter (at a local store because we were in a hurry).
Quality *2:Because Mirror moves due to running vibration (maybe product difference?)
Visibility *2:Because the cut area of the Fashion oval is less visible than the OEM oval due to the reduction in area.
Design★4:Other Brand:Because the sense of product has been improved.
View detail
Fits: SUZUKI ADDRESS V125 [ADDRESS] G CF4EA, SUZUKI ADDRESS V125 [ADDRESS] G CF46A, SUZUKI ADDRESS V125 [ADDRESS] CF4EA, SUZUKI ADDRESS V125 [ADDRESS] CF46A, SUZUKI ADDRESS V125 [ADDRESS] G CF4EA, SUZUKI ADDRESS V125 [ADDRESS] G CF46A, SUZUKI ADDRESS V125 [ADDRESS] CF4EA, SUZUKI ADDRESS V125 [ADDRESS] CF46A
It's getting brighter
The OEM had deteriorated and we replaced it with this less expensive one.
It reflects the light of the Valve well, so it is very easy to see and I am satisfied.
However, I changed to LED bulbs at the same time, and the light seemed to be slightly scattered, so I gave it 4 stars for visibility.
I don't think Halogen or OEM Valve would mind.
View detail
Simple&Compact
[How is it used?
I bought a used WR250R a few years ago with a Fender Eliminator Kit from Other Brand Product.
The Fender Eliminator itself was fine, but in my opinion, it had a tail lamp that was not suitable for the vehicle, so I purchased this product to replace it.
Did you receive the item as per the Image?
The product received is more Compact and thinner than I expected, and depending on the position setting, it looks I don't think the tail lamp is installed!" The product was so large that I felt it was more than Image could provide.
Was it difficult to install?
The functional aspect of the Lamp is completed when the originally installed Bullet Type Terminal for connection is removed and connected to each.
My WR250R has Other Brand Product's Tail lamp as mentioned above, and it was originally Bullet Type Terminal connection, but I replaced the Bullet Terminal on the product side because the terminal size was a little too large. 1 pc is Grounding Wire (Black) I can't remember which is which... sorry.
The Fender Eliminator can be installed without any modification because the holes were aligned well with the original holes for installing the Tail lamp.
If you buy the OEM type connector for each manufacturer sold by KITACO and connect Wiring, Wiring will be refreshed and you can easily return to NORMAL when you want to. If you want to return to NORMAL, you can easily do so.
How did you like it?
The Tail lamps are fixed in a safe position because they can be involved in unexpected accidents such as rear-end collisions when driving on public roads if they are not clearly visible. (I have a friend who says that I am over-refreshing...) I personally have nothing to say.
Was "Included Parts:" attached?
It is a very Simple product with all the product images shown in Webike's product section.
Were there any disappointments?
Not at all.
Because of the low price, I was worried that the LED bulbs would burn out, but they have been functioning without problems for several years since they were installed.
Other items that would be helpful
Point and hang of installation
If you want to process Wiring as beautifully as OEM, use the OEM Type Connector by Manufacturer as described above! (Since this is a personal judgment, those who are fine with Bullet Terminal can leave it as it is, but since it is an insulated tape, please make sure to perform waterproof treatment.) 。
[Availability and clarity of the Instruction Manual
electrical system (?) I think this is a very straightforward product for the
[Notes]
Nothing in particular, just be careful not to misplace Wiring?
[ITEMS TO BUY TOGETHER
As I mentioned above, this is also available from KITACO and other companies. OEM Type Connection Terminals by Manufacturer will allow one-touch connection to Harness on the car body side.
Since the method of fixing to the car body varies depending on the car model, it may be better to try a temporary assembly before full-scale installation.
First, check the fixation method by placing it on the vehicle in which you want to install it.
[Opinions and requests to Manufacturer
The price is low and the product is Compact, so it is a highly universal product.
View detail
Fits: SUZUKI Address V125G, SUZUKI address V125
The color etc. is good, but it's a pity that it doesn't fit as Exactly as OEM.
Used to replace an OEMCowl that had deteriorated and become white, and had a hole that did not allow a Clip or Screw to be inserted in Smooth any more than an OEMCowl. The OEMCowl has a hole in the Smooth that prevents the insertion of a Clip or Screw. However, the only complaint is that there is a 3mm gap between the Rear Leg Shield and the Cover and Leg Shield, whereas there was no gap in the OEM, and it is expected that mud or water splashing up from the front wheels will enter the vehicle while driving. In addition, the angle of the clip hole on the upper side of the Lid and Maintenance No. 2 was not good enough to fit the shield effectively, and it could not be fixed. In the end, they were fixed with Screws. These two things are the reason why I gave it 2 stars, which is a little disappointing. I don't remove these inner cowl often, It's a lot harder to take it off and put it back on than it was for the OEMs." I thought as I installed it, even though the thickness and texture of the inner cowl feels the same as the OEM…. I would recommend this product to those who can accept this point in consideration of cosmetics. View detail