Reviews
ถึง ทีมงานWebike ด้วยจุดหมายปลายทางผู้รับของได้รับเรียบร้อยแล้ว..ตรงตามวันที่ได้ขอไว้ ขอบคุณในการบริการที่ดีมาก รู้สึกประทับใจอย่างมากในการให้บริการของทางร้าน ขอบคุณมาก View detail
Fits: YAMAHA MT-25, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA YZF-R25
It looks better now.
Model YZF-R25
The Rear is quite dirty and it is now clean. the Brake Caliper is OEM and the Pad is DAYTONA, but I am glad I replaced it. The braking power is normally increased and I am satisfied.
View detail
Touch may be too soft.
Inconvenient because the 10R OEMBrake cannot be removed without removing the Wheel.
Mounted on the underside with Bracket to improve serviceability.
The pad spring is very hard and the pad pin is press-fit, so we replaced it with an external pad spring and pin.
If you are a do-it-yourself maintenance person and use the new Crab, the above should be changed.
Even if you purchase the above, I think the price is low for an Aluminum Piston with high corrosion resistance and a pad.
The 30mm→34mmPiston changes the Ratio and the Pedal is very squishy.
10ROEMMASTER is 14Φ and there is nothing I can do about it because there is no MASTER that is any more LARGER, it should have been a 32mmPiston.
View detail
Too bad about the color of Nut.
Purchased because the diameter of the Nipple no longer fit in the MASTER replacement.
Same shape as 10ROEM but OEM is 8mm diameter with domestic Spec. and this is 7mm diameter with RCS Nipple.
I thought they were the same except for the diameter, but the fixed nut on the lid is silver while the OEM's is black.
It's a fewmm of Nut, but it's a shame that it looks like it's floating when I wanted to create a unified look with Black.
I tried to replace it, but it is fitted like a ring of wisdom and cannot be removed.
View detail
Before the price increase
[How is it used?
I have no complaints about the NORMAL brake, but I still think that the brake should be brembo.
Was the one you received as per Image?
Red b is good for Parenthesis.
Was the installation difficult?
The installation information provided by the senior staff was helpful and made me feel at ease during the installation process.
How was your experience with it?
Touch indeed!
[Included Parts:were they on?
Banjo bolt requires additional purchase
[Was there anything that disappointed you?
None
View detail
It is a reliable Brand.
brembo is a trusted brand when it comes to brake parts.
This time I bought it as a Brake Disc for SpareWheel to use in Race.
[Super Sport] Floating Disc is already in use, so there is no mistaking its performance.
Compatible ZX-10R models are DISC DIA. Since it is Φ330, it takes a little time for the Brake to work properly at low temperatures.
It needs to be warmed up with a firm Brake in a sighting wrap.
The higher the temperature, the more stable the Breaking can be.
View detail
Fits: YAMAHA YZF 450, YAMAHA YZF 400, YAMAHA YZF 426, YAMAHA YZ 250, YAMAHA WR F 250, SUZUKI RMZ 250, SUZUKI RMZ 450, KTM XCW 525, KTM XC 525, KTM XCG 525, KTM SXS F 450, KTM SXS 540, KTM SXS 250, KTM SXS 450, KTM SXC 625, KTM SX SXS 125, KTM SX 300, KTM SX F 250, KTM SX 250, KTM SX 144
I don't know.
We used Brembo for the front calipers this time.
The caliper recommendation was 15RCS, so I put it on my Grom, and the brake touch is totally different compared to the stock one.
I've been riding my CB250R and getting more and more hits, and the front brake is working better and better.
I don't feel like it's direct. Well, I've never ridden a bike with ABS before.
I knew what to expect.
It felt like the 15RCS recommended master cylinder when I gripped it.
I was tempted to put on 16RCS and compare. Sweat.
It's expensive, so I can't just change it at a moment's notice.
View detail
Beautiful
I think it took about a month to get the stuff for the CB250R, but the bike was never delivered.
I've been putting it away. Finally, I can install it.
I thought it would be nice if the calipers were at least flashily Red.
My CB250R is equipped with ABS, but I had to remove the ABS for this work.
And with the ABS sensor rings on, the centers didn't seem to align.
I'm not even concerned about the car inspection, so I feel comfortable removing it.
I don't know how well it works because I haven't hit it yet.
Well, it feels good, because you can't go wrong with radipon calipers and Brembo.
Things are very clean.
View detail
The real thing.
Used for Brembo conversion
Well, it comes in a set, so it's very convenient.
And there's no sense in using a different manufacturer just for the tank.
View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1, KAWASAKI ZX 14 R, KAWASAKI ZX 10 RR, KAWASAKI H2R, KAWASAKI ZX 10 R, DUCATI 1103 V4 Panigale, APRILIA RSV4 APRC, TRIUMPH Street Triple RS 765, MV AGUSTA F4 RR 998, KTM 1290 Superduke R, MV AGUSTA F4 1000 LH 44, HONDA CBR 1000 RR SP, DUCATI X-Diavel S, DUCATI Multistrada 1200 S, DUCATI Monster 1200 S, DUCATI 1299 Panigale, DUCATI Monster 1200, DUCATI 1260 S Multistrada, DUCATI 1199 Panigale Superleggera
Compare with Yamaha Brembo
I was not dissatisfied with the performance of the Yamaha Brembo on the YZF-R7, but there was no lever available to install the REMOTE CONTROLLER, so I had no choice.
Installation, but requires Bullet Terminal processing and Nipple modification on Switch.
Since OEMWiring is a Connector, it is cut and converted to Bullet Terminal, and the RCS side is also cut and shortened.
The Nipple seemed to be able to go as it was, but the Hose needed to be bent 90° and it was too tight, so I changed it to Straight.
The nipple diameter of the RCS is 7mm, but the OEMTank is 8mm, and the RSC side is governed by the 8mmHose, so the 7mm is forcibly installed.
If you are particular, you should buy a 7mm Tank.
The Yamaha Brembo has a banjo on the side, so I used an offset adapter, but the RCS can go without it.
The Chinese $3,000 REMOTE CONTROLLER came on with no problem. The REMOTE CONTROLLER is easier to adjust even if it is not Race.
There is almost no difference in structure between the 16mm Radial Yamaha Brembo and the 17mm Radial RCS, so I don't feel any difference in performance, although the price is about twice as much.
I chose RCS for the REMOTE CONTROLLER, otherwise Yamaha Brembo would have been sufficient.
View detail
Shipment was more than 2 month on the way. Webike didn´t help with customs-problems, high taxes comes above !!
This was my absolutelly bades experience with shopping in internet. The Brempo P4 was more than 2 months on the way. Webike did only say look on the tracking, no more help. The article was 4 weeks in customs in frankfurt, many email an phones later ist was shipped to other customs and i have to start discussion here again. Then a lot of taxes for customs and import-taxes and i have to take a customs-specialist to do the import-process. At the end it was much expensive than in Germany. No good support from Webike and also Paypal could not help. I would say dont buy here!! View detail
Fits: HONDA CBR1100XXBlack Bird, HONDA CBR1100XXBlack Bird, HONDA ST1100A Pan-European, HONDA ST1100A Pan-European, HONDA ST1300 Pan-European, HONDA VFR800, HONDA VFR800, HONDA VFR800ABS, HONDA VFR800ABS, HONDA VFR, HONDA VFR, HONDA VTX1800, HONDA VTX1800, HONDA VTX1800C, HONDA VTX1800C, HONDA VTX1800R, HONDA VTX1800R, HONDA VTX1800S, HONDA VTX1800S, HONDA X11
Great Control
There were few options for Pad for Pin slide caliper for my Motorcycle, only Resin pad.
Since brembo has lineuped Sintered pad, I bought it without hesitation.
After the replacement, the new wheel is acclimated quickly, and both control and braking power are dramatically improved.
I was surprised to see how much difference just a pad can make.
I don't know about the durability yet, but I am satisfied with Large when I experience such high performance.
View detail
Fits: BMW S1000RR, BMW S1000RR HP4, BMW S1000R
Cospar good
After 10,000 km, the Large Rotor was stepped, so it was replaced.
The price is lower than the OEM Rotor and it is the same brembo as the OEM, so I didn't hesitate to buy it.
Installation is very easy
Accuracy seems fine. Thickness is the same as NORMAL.
I guess the wear of the rear brake rotor after 10,000 km is the price to pay for the front and rear interlocking brakes.
View detail
bremboFluid cap
Replaced because it had deteriorated and looked bad.
Screw stuck and struggled to remove.
After the replacement, it looks different.
I feel good about the ride.
View detail
bremboBrake lever
Installed on Ducati 400SS.
Since only one of them was BlackLever, I was satisfied with the uniformity.
It was easy to install
View detail
To Refresh!
[How is it used?
I purchased this because the Cap had become crusty and decayed over time.
The Release part of the Clutch was replaced.
How was your experience with it?
It is new, so it is soft and tight.
And with bremboLogo, the tension is increased.
How did it compare to other products?
There are other cheaper Caps and such, but if it is only a few hundred yen difference, bremboCap is the way to go!
And it is a reliable Manufacturer.
[Points to note]
I will remove it properly from now on when I bleed air.
View detail
Rear also Dress-up
[How is it used?
for Clutch installed on a 21 Panigale V4 RearBrake tank.
It is just the right Size.
Was the one you received as per Image?
It was exactly as I imaged it in the posted photo.
Was the installation difficult?
It is easy to cover Tank.
The position of the side cowl needed to be adjusted so that it would not interfere with the side cowl because it was not in its original mounting location.
How was your experience with it?
For Front, I am using DUCATIOEM,
The quality is comparable, so brembo is more cosmetic.
[Included Parts:were they on?
None
View detail
The P2 rear brake caliper offers outstanding braking performance
About quality and texture - The P2 rear brake caliper from Brembo is made from cast aluminium with a black anodized surface finish and includes brake pads, the quality from the overall fit and finish is perfect. About the feeling of use - The P2 rear brake caliper offers outstanding braking performance with it's larger piston diameter and higher quality brake pads, while the look is also improved with the subtle black colour caliper. Products to buy together - The Honda Grom is an inexpensive motorcycle with a lot of low quality parts from the factory, so the purchasing of other high quality parts like this P2 rear brake caliper from Brembo would be perfect but the essential product to purchase to complete the installation is a rear brake bracket to allow for the mounting of the rear brake caliper. Difficulty of installation - The installation of the P2 rear brake caliper is an intermediate task that took 0.7 of an hour to complete. Some mechanical aptitude, knowledge on disassembling the Honda Grom and the use of basic hand tools is what is required to secure the P2 rear brake caliper to the bracket and bleed the brake caliper. Cost performance and comparison with other products - I find the cost of all the products Brembo sell to be higher then what most other companies sell their products for and the P2 rear brake caliper is no different, but this is due to the high quality materials used and the consistent high quality finish of their products. About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the P2 rear brake caliper, I chose EMS for an earlier arrival dates. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs with their variety, availability and pricing. View detail
Great product, great upgrade
Malfunctioned stock caliper on a so this was a better option to go than OEM.I didn't expect much when I bought it.First try was in the long ride and I wouldn't spend this much money for the extra performance if I didn't have to.That was a game changer, especially on steep downhills.Brake precision and overall performance is far better. Braking at speeds above 100kmh made a big difference.braking distance is now noticeably shorter.Worth every penny. Also looks better on the bike than I expected. View detail
Fits: YAMAHA YZF-R7, YAMAHA YZF-R6 S, YAMAHA YZF-R1 SP, YAMAHA YZF-R1, YAMAHA YZF 1000R, YAMAHA MT-07, YAMAHA MT-09, YAMAHA FZS 1000, YAMAHA FJR 1300, YAMAHA BT 1100, YAMAHA FJR 1300, SUZUKI Hayabusa, SUZUKI GSX-R 750, SUZUKI GSX-R 600, SUZUKI GSX-R 1000 R, SUZUKI GSX-R 1000, SUZUKI GSX-R 1000, SUZUKI GSX-R 1000, MV AGUSTA F4- RR, MV AGUSTA F4- 1078
Genuine Brembo 19RCS Corsa Corta fitted to YZF-R1
The YZF-R1 came in wanting to be transitioned onto a track related bike so I went to work on the braking system. One of the first things I wanted to change was the annoying stock master cylinder. Obviously, Brembo was the way to go. I decided on this one as it fitted with the specs of the bike in mind. Finding the correct master cylinder was not hard but there were a few choices but I went for this one, the 19RCS Corsa Corta in the end. It had all the requirements I needed so it went in my basket. I had a few other parts and the shipping was reasonable for what I had. EMS got my order to me in 5 days. The master cylinder came with the standard stock lever length which was perfect for my needs. It is the 18 x 20 one so works good with the floating calipers on the bike anyway. It came in the Brembo box and also came with a few copper washers. I had already sourced the HEL line that would make this all work. The master cylinder is a real piece of kit and fitted really well with the bike and the instrument cluster I was leaving in situ. Not a hard job once you have all the parts together. This master cylinder is awesome and so much better than the stock one. Oh and by the way, looks the nuts. There are just so many adjustments that you can definitely find the right setting for your liking. Thanks Webike for the great service you provide. View detail