Reviews
It is a simple part.
It's pretty good; if you frequently take the Seat on and off.
Even with Glasses, the OEM would still get scratches.
Just right. ButterflyScrew and KnobType too.
We sell, but not too explicitly.
You can take it off! I don't think so.
I think, but the Seat theft Risk will also go up.
I think this is about right.
In terms of discreetness, even if the Black color
I wonder if it is a good idea.
View detail
After working on Engine.
Until I get my license back on my current SR.
I'm going to keep riding.
It was installed for Engine's labor.
I am glad I put it on because the vibration is also Mild.
Another manufacturer also offers Reinforced Oil Pumps.
It is Classical in appearance, and that is better.
I like it, but that one has Engine.
It has to be opened, strengthened 1 to 2.
This one takes a separate branch and uses 2Line.
The Engine is gentle to the Engine because it can supply Oil.
I thought it would be a boa ace, so I went with this one.
View detail
One point
Completely self-satisfied One pointParts
The quintessence and quality is good.
Boa Ace is a bit of a real thing.
It seems that sometimes Logo is not included.
This one is properly pictured.
View detail
Relief
Chain flapping is considerably reduced, so
It is not conspicuous, but it is a relief to know it is there.
The picture is old Type, but if you buy it now.
The new Type here is good.
View detail
Dress-up。
I'm going to paint the Engine black.
Balance of color and dress-up are the first step.
Silver is installed. As for the anti-heat effect
I thought it would be slight for Single Body.
Oil seeps slightly from the tip.
View detail
Confirmation of MODEL required
Installation is easy. I have been working on it since I purchased it.
The tool compartment has been removed and the hollow Space
I'm installing it only because I didn't like it.
Bore Ace, for better or worse, as improved versions are developed.
(A little sad when an improved version comes out after installation…(lol)) )
There are two types:the old Type? and the improved Type.
for Carburetor? (may need processing) The improved version is
It can be attached to FI Vehicles. Old Type is
It is not physically attached to the FI, so it is on the bore Ace itself.
I think it would be better to make sure.
Currently I am not sure which one will be delivered.
I was forced to put the old Type on at first.
View detail
Psycho!
I always change to Rear Sets when I change motor cycles, but this Manufacturer is the only Manufacturer that specializes in SR, and it has a very good position, shift feeling, and rebound against footpeg wells. It is very comfortable to use.
If you are wondering which Manufacturer to choose, it is Recommendation.
View detail
I feel less depressed between each shot.
I installed it with the intention of lowering the Engine internal pressure a little while also protecting the Valve stem seal. It seems that it took a long time to develop this product.
In the Normal tank, the body is not visible in a good way unless you look into the tank, regardless of whether you choose Silver or Black.
View detail
Good degree of freedom of installation
The position and direction of installation can be freely adjusted.
Good.
Smartphone Holder can be installed by any manufacturer
It looks like it can be done.
Vibration-proofing effect is considerably reduced even with SR400 vibration
It is done.
I'm glad I installed this one, right?
View detail
Best if you consider even high speeds.
I was thinking that the Handlebar Up Type would be better for ordinary roads, but the Style changes to Large. I thought it would be the Handlebar Up Type for ordinary roads, but the Style changes to a Large Type.
It also seems optimal considering the wind resistance at high speeds and the holding of the Front at Winding.
This would work as well as NORMAL, since the height of the Handlebar does not change, even with a Wise Screen.
The frontal posture is NORMAL, but the handlebar is in a natural position with the handlebar at the point where the arm is lowered.
Winding is more fun.
I was a little concerned about the rigidity due to the U-shape, but since the Handlebar is fixed, there was no problem.
The only complaint is that the rigid fixing bolt is too long and could not be tightened with a box wrench.
View detail
The finish is good.
Boa Ace's aluminum parts are really well finished.
Not only in appearance, but also in fit when assembled, there are no problems at all.
View detail
sr400 '83
I could feel it because it supports in the direction of rotation. View detail
Fits: YAMAHA SR
TRAIL quantity is a Large thing.
Expensive product, but Offset:I really wanted 35mm For Separate Handlebars, so I saved up a little and bought them.
Since we originally used boreace's 47mm NORMAL Top Bridge, we can use the Meter Bracket and Key Cylinder Bracket without modification.
This is required for replacement from NORMAL.
Also, it would be better to have a lower bearing race that matches the bearing with OEM Parts.
A Pipe to type Race would also be nice.
The replacement will change the ride quality by a large amount.
In my case, the Merit is superior to the TireSmall diameter with Rear Ride Height Up, because I feel that I was able to compensate for the insufficient amount of TRAIL.
The replacement has improved stability at high speeds.
The Corner ring has a stronger Fee Ring as the Frame is laid down, and the initial response is slower than before.
Instead, it feels more stable after it is laid down, and the feeling during the Corner ring is Up.
The quality is as good as it gets, no complaints!
View detail
It may be hard to tell the difference.
I purchased this product to level the Tank and Seat.
The difference seems to be that those who can understand it, and those who can't, can't understand it at all. He can tell, so he is self-satisfied.
It is a quintessential BOA -Ace beautiful product. Too bad it is not visible.
View detail
I feel it works.
After installing the engine, I test drove the car and found that the vibration and engine noise, which used to be loud at over 100km/h, did not become bothersome until about 120km/h. The engine noise was not noticeable until about 120km/h.
Smooth behavior when opening and closing Axel
I know it's a bad word, but I honestly felt that Boa Ace had a lot of believers and that it was Brush-bo, but I bought it because I thought I couldn't critique it without trying it on myself.
I was hoping that even if it didn't work, it wouldn't be a Large price and it would be a Dress-up, but I think this will work.
I bought the one with windows, but it seems that they changed the spec. and there is no Laser engraving around the transparent part, and there is no Blue cover of Swage line.
I like the Engine area without the clutter, but I feel that those who want to Appeal need to check.
View detail
Installation includes OEMCover and other modifications!
The OEM cover was used, so the cover and boots had to be modified for installation.
I thought the installation Large strange if you are pretty much a beginner.
The feeling of running, indeed, the feeling of Shift is better…
I'm feeling …
View detail
It certainly looks different…
It certainly seemed to work…
I feel a little easier to ride…
For the installation, it was a good decision to have another OEM Hose, just in case.
View detail
also
The quintessential quality of the production.
Some say the price is too high.
The product will convince you.
View detail
to fix
Rear Sets are fixed with rust-resistant stainless steel bolts. View detail
If you are, it is convenient in it being unexpected!
If you are, it is convenient in it being unexpected! View detail