Reviews
Easy installation
I purchased the Mukawa MF12V1.3Ah to install in my MONKEY50 and was able to install it successfully.
The packaged product fits easily into the electrical parts box, making it easy to find during later work.
View detail
Considering it as a Bullet Type Terminal, this price is ….
The Waterproof Specification is IPX3 etc. level, so it cannot withstand submersion in water, but it can withstand some heavy rain, and I think it will be no problem in places where it will not be directly exposed to rain, such as under the Seat.
However, considering it as a Bullet Type Terminal, the cost of nearly 100 yen per pair seems expensive. If they are gold-plated, I can accept it, but they are just as they are.
View detail
The store's response.
I am satisfied with the product, which is small in size but functions well.
I don't think I will ever buy from the store again because their response is terrible.
View detail
![[GENB] 200 Series HI-ACE Front Bump Stopper](https://img.webike-cdn.net/catalogue/images/18584/ose-mf-sbb01h_01_TS.jpg)
I feel like I've changed somehow….
[How is it used?
I purchased this product to optimize the suspension with the lowdown of the high ace.
I have only driven about 100 km after installing the product, but it seems that the bottoming-out feeling (a guttural impact) when going over bumps has somehow been alleviated. The impact is not completely gone, but it seems to have been alleviated.
However, I think I can feel the effect more if I set the gap between the Re-bump and Bump Stoppers, and I think I am not setting enough to feel the Large effect. I will make adjustments as I use the product on a daily basis.
Was the one you received as per Image?
It was just like the Image, or more than the Image.
When I dropped the OEM Bump stopper and the Genbu stopper from the same height, the OEM stopper made a clunking sound and did not bounce, but the Genbu stopper made a Rubber-like sound and bounced.
I had the impression that it had a solid Rubber feel and seemed to absorb shock.
Was the installation difficult?
Jack is required. It is possible to go without it, but it would be more efficient to raise it.
Installation is easy, but the included Plate is oriented in a certain way, so it is sufficient to pay attention to this when installing it.
[Was there anything that disappointed you?
I took on the challenge with the aim of riding Lexus, but high ace is high ace no matter how it turns out….
I did not feel a drastic change, but as I mentioned earlier, I think it is also a Setting issue, so I will go ahead and make adjustments while searching for the best position.
View detail
wait-and-see
[How is it used?
High ace Re-bump stopper is now changed from OEM to Other Brand Product.
Was the one you received as per Image?
I have the impression that the size is rather larger than the Image, and you can see how large it is when compared to the OEM.
Was the installation difficult?
The OEM Stopper is easily removed by simply pulling it off.
Genbu's Re-bump stopper is also relatively easy to install as it is a Nut fixation together with the pedestal.
One thing to keep in mind is to make sure that the attached pedestal is facing the right way.
On the pedestal This side is the outside. is clearly printed on the label, so you can be sure that it is correct if you check it while attaching the product.
The other thing to do is to install it while pushing it in at a slight angle, since it is larger than OEM. It is hard to describe in words, but I think you can grasp the hang if you do it….
How was your experience with it?
When I actually ran the car, I got the impression that there was no longer any unnecessary stretch in the suspension.
It's a better ride." or perhaps I should say It's got a solid footing." I think it would be more correct to describe it as I think it is.
[Was there anything that disappointed you?
I was expecting a Lexus-like ride, but alas, high ace is high ace….
Nevertheless, I think the effect will be quite noticeable.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
low price
With other manufacturers, you can only buy one or two at this price, but this is a low price anyway.
When I have purchased from other manufacturers in the past, I was able to buy them one at a time in Rose, but they were packed in a large Vinyl bag.
View detail
Number one electrical component that will never be enough
[How is it used?
Used to install DAYTONA/D-UNIT and YOSHIMURA/Oil Temperature Meter on XJR400R.
Bullet Type Terminal is all about Male, isn't it?
This is because the 6V MONKEY/GORILLA main harness side is usually Female and the electrical components to be removed are Male.
How was your experience with it?
When it comes to electrical systems, Emon is reliable.
If you attach a proper cheap one, it will be the direct cause of the worst leakage or short, so you need a solid one.
How did it compare to other products?
Frankly, I should have purchased the Male terminal-only ones that Emon offers separately, as the Sleeve tends to be too much.
However, I am satisfied that this product alone will last for the foreseeable future.
[Points to note]
When crimping, be careful not to use solid Electric Works Pliers, otherwise leaks and shorts may occur.
View detail
A little cheap?
They are sold at other mail-order sites because they are general industrial parts, but they charge the list price plus shipping and claim free shipping. (seems to be) whereas
WeBig does not include shipping.
So if you buy more than one, you pay less for shipping.
There is no such thing as buying just one Tie DownHook, so buying one here is the right choice.
View detail
Fits: Others 200 series high ace S-GL,100 series high ace S-GL
Might be a must for Transporter.
I am using a 200 series high ace as a transporter for an off-road motorcycle. When I mount it on the vehicle, I put a tire on the Seat and fix it with a Tie Down, but the rocking of the vehicle during the ride has scraped the Seat by the block tie ya and it looks like it is going to have a hole in it! (or rather, it's already empty, crying) So I bought it to prevent that. The thing itself is very good, and very easy to install, just tuck it into the headrest! There is also a Magic tape on the back so I don't have to worry about gapping. The best thing is that it's cheap! View detail
periodic replacement
[How is it used?
The water repellent coating on the front glass of my High Ace is getting old, so I had it completely stripped. The window wiper was used, so we decided to replace it with a new one.
Since I made Glaco's water repellent Coat, I wondered if they would go well together. I thought it would be a good choice.
Was the one you received as per Image?
It's a regular Windshield wiper rubber. I think there is a lot of Graphite adhered to it.
How was your experience with it?
There was no unpleasant Chatter/squeak. It was a perfect match with the water repellent Coat. I put a fluorine type coat on it. The water repellency was perfect for the Drumstick.
[Points to note]
I guess it's the direction of insertion into the Blade and making sure it doesn't hit the Glass after removing the Blade from the Arm. Worst case scenario, the Front glass will break.
How did it compare to other products?
Smoother than Astro's $500 Windshield wiper? It wipes up.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
Now I am wondering what the durability is like. I hope it will last until the end of the rainy season.
View detail
sq does not fit and cannot be used
The Power Out-put Cord of DAYTONA Power Unit (D-Unit+) had a stag beetle terminal, so I bought this to change it to a Round Type Terminal.
However, since the Power Cord was over 3sq, it could not be crimped with this product.
The product itself is solid and good because it is made by Emon, a reliable company.
I think I will keep it in Large because I may use it in the future.
View detail
Small and not a burden even on Motorcycle
Stored next to the on-board tools under the Seat.
It is very small, so I feel it can be loaded on any motorcycle.
*Batteries are not placed inside because of the fear of liquid leakage.
View detail
Worth the money!
+ Very useful product, I use it every time I tie down the bike. Does as intended and does not add that extra compression to you forks.Feel a lot more comfortable knowing that my forks aren't under a lot of load while being transported. I also have no problems leaving it up on the truck overnight now. It is plastic an I am not sure how long it will last but it is worth the purchase. - Barely had to compress suspension for straps to go tight. Tightened until the tire just started to compress a little Bike did not wobble or move around during drive to track Only thing nicer would have been if it attached to the forks like the ones KTM and Husqvarna provide but those are bike specific and this one is generic. so no complaints View detail
amon Terminal Set For Coupler
Good quality wiring terminals.Great value, works great I am very impressive with the quality of this connector for the price.I'm so glad to have a handy coupler terminal set .came with a mini transparent box.In most cases these terminals are very difficult to buy and find locally.So I think this is a set of terminals that every rider should have and need.I bought a horn for my TDub from the webike shop. When installing it, the two main wires connecting to the horn were short, so I had to extend those two wires by about 15 cm.At that time, two 6.3mm terminals of this type were needed, luckily I had two 250 type terminals, so I was able to complete the work successfully but coudn't find these type of terminals at local market.Having coupler terminals like this in a small box can be used in unexpected emergencies.If you want to crimp the terminals similar to the electrical work done by the OEM factory, Buy these quality terminal set .Don't forget to use proper open barrel crimp tool.With a nice quality terminal like this will get a nice finish crimp work.As always package received within a week after dispatch from Japan.Thank You Webike for the High Quality Packaging and The Service.Webike ...One of the The Best Online Shop Ever. Highly Recommended. Cheers ! View detail
It's solid
It was sturdier and more solid than I imagined. It seems safer and less likely to come off than with a proper stick or something.
The price is a bit steep, but once you buy it, it's not something that will break, so I think it's fine.
View detail
Conditions of use apply.
It is applied diagonally over the rear wheels and pulled forward to secure the vehicle body. (Fixed assist.) Supplies.
The place to pull and Hook is limited to a certain extent (by angle and distance).
If it's a self-owned Transporter, I'm sure you can do whatever you want to counteract that.
I am using a rental car and it did not function as it should.
(Sub belt could have been used to some extent)
The Ratchet section was somewhat difficult to use.
Based on the above points, I gave the satisfaction rating 3 stars.
I gave it 3 stars for durability as it has only been used once.
View detail
Awesome Flat Horn
I really like the familiar genuine Beep Beep sound.The sound surprisingly loud and powerful.I like it because it is loud and the sound quality is very good. Product Finishing Quality Is Superb .It is special that anyone who sees this product packed in an attractive way .I really love the way mitsuba sankowa flat horn presentation.I bought this horn because I really wanna replaced my old,rusty looking horn.I try to remove the center nut of this brand new horn because my tw200 terminals pin wires little too short when I try to plug in. When I attached stays to the mounting area this flat horn pins positioning downward.( Most Genuine Horn Pins usually comes upward position )This Flat horn product attached stays should never be loosened or removed and it will change lead wire position angle..To Install this brand new horn onto My TDUB, I had to extended the two wires that coming from the main harness.I used18 AWG gauge 13mm long two electrical wires .Each wire solder into the main harness wires & crimped with the Terminal Ratchet Crimper Pliers, Then Placed This brand new horn the way it positioning & plug two wire terminals in.Took 10 to 15 minutes to get the job done.Product Price is so cheap.Mitsuba Sankowa As a professional manufacturer, I'm so satisfied with the quality and the price.The package received in a good condition and nicely packed.Thanks For The High Quality Packaging.Nice Online Shopping Experience.Very Happy Customer .Highly Recommended.Thank You So Much WEBIKE. View detail
MARCHAL H4 Bulb
About quality and texture Light bulbs are of high quality About the feeling of use The brightness is good and the quality is good Products to buy together 819 Full Kit Difficulty of installation easy Cost performance and comparison with other products It has good quality and good price compared to other light bulbs About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I purchased additionally, but I think Ape100 is dangerous at night You have to use a good light bulb against the quality I strongly recommend this product View detail
ESSEX Brake cover
Very nice fitment. Fit in nicely and very nice finishing. Better grip in releasing handbrake. Give your ride another level of class. View detail
Purchased for installation of Grip heater
I purchased this product to install Grip heater.
It can be easily processed with Electric Works Pliers.
Emon quality for peace of mind.
Quantity with Electric Works Pliers during my first electrical DIY project.:We also purchased some terminals at Set, but what wasn't included, we bought a little bit more each time.
This time I bought it at a physical store (mass retailer), but Webike was cheaper. Next time, I'll buy it while I'm adjusting shipping costs or whatever.
View detail