Reviews
Completely clean
Perfect for JRM-11 made by Japan Radio.
Tighten to Clutch lever holder.
Just because it is too conspicuous, I'm considering moving it around Meter.
View detail
It is a good deal..
I think that the usability is good because it is lightweight and it can adjust the angle.
However, angle adjustment many times (Bending elongation) Then, the surface Anodized (?) It seems Crack is in.
The hole of M6 mm is empty because it is used for fastening with the Clutch lever holder, but if it is 8 mm it can be installed anywhere..
I am satisfied because it is inexpensive compared with similar products of other companies.
View detail
Refreshing around Handlebar
Until now, I was wearing an ETC receiver with my own Stay, but other switches and so on also increased, and the surroundings of Handlebar got stupid. Refreshed by using this product. View detail
Used as Universal Bracket
【What made you decide the purchase?】
- Originally it was Exclusive Bracket to install ETC, but because it was rare Crank style Bracket, I thought that it would be a substitute for the L letter Bracket two piles that I had installed so far
【How was it actually used?】
- The place I used this time was the exchange with Bracket where Temp meter was installed, the Bolt size of Cowl side which we were tightening was M5, the size of Meter Bracket coincidentally coincided with M10. Fixing with Meter Bracket uses Rotor bolt
- After installation, the Temp meter approached Meter, so that the appearance became Refreshing, and there was no vibration or gap even when traveling
[Is there anything I was disappointed about?]
- None
【Hope for Manufacturer - Please let me know if you have any improvement points]
- Despite being a special item, I wanted you to describe the fine size of Bracket. Because I did not see it anywhere I will place it
【Have you compared items?】
- Bracket of each Manufacturer and Bracket of Home center
[Others]
- Since it is a Bracket used to attach the ETC to the last, when using it as a Universal Bracket, it is necessary to have some contrivance. Size of Bolt hole is also M5 and M10 so usability is not good
View detail
I attached ETC.
I attached it to Mirror Holder.
Easy to do it did not interfere with the car body even if you cut the Handlebar.
It is a little heavy with thick steel, but there seems to be no blur of Mirror.
View detail
Simple & high texture
I exchanged from ETC Bracket of Tanax.
I am satisfied because it is a simple and textured product.
However, one point. If you improve another angle so that it can be adjusted.
We installed it in MT 07, but we can not adjust the horizontal direction so we bent the mounting part slightly across Plate. Since I chose Black Plate, Crack entered a little in the painting where I bent, but I think I should paint it (Lol).
It is the best recommendation if you can install it where the level can be kept.
View detail
Good for mounting on Handlebar.
I bought an integrated ETC, so if you were planning on how to install it in the Motorcycle
I found this Bracket and purchased it.
Since attachment of ETC Body can not be fixed with Screw, it fixed with Magic tape.
Also, the power supply used Socket for Vehicle.
Since it is easy to remove by fixing Magic tape and using Socket,
I think that I could do a good shopping.
View detail
It's pretty good.
The price is expensive.. Making is strong and good.
It is originally for ETC, but Jupiter
I will use it as SUPER CAT Tray Da Mount. The width is exactly right with the width of the detector. I also took 12 V key interlocking Fuse so the operation check was also good,
I'm looking forward to Touring.
View detail
Although it was a thing for V-MAX, it attached to ZEPHYR750.The ETC Sensor attached to the Handle clamp by another Stay was transferred to the Mirror fixing position.A high grade feeling has appearance with a Carbon. Even after transferring,
Although it was a thing for V-MAX, it attached to ZEPHYR750.The ETC Sensor attached to the Handle clamp by another Stay was transferred to the Mirror fixing position.A high grade feeling has
appearance with a Carbon.
Even after transferring, it was able to pass through the ETC lane to the Smooth satisfactorily.
View detail
Structure and texture are satisfactory. This is although it is a problem of how to use me... In order that bending part might tune finely, when a little angle was changed by hand, the Anodized cracked. So big power was not necessarily put
Structure and texture are satisfactory.
This is although it is a problem of how to use me... In order that
bending part might tune finely, when a little angle was changed by hand, the
Anodized cracked.
So big power was not necessarily put and only a few is also changing the
angle.Is it a problem of the quality of the
Anodized?
For using it as it is, it is satisfactory.
View detail
Fits: YAMAHA YZF-R25, YAMAHA XSR700, YAMAHA MT-09, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-10, YAMAHA MT-10 SP, Others , YAMAHA XG250 TRICKER, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA SEROW250, YAMAHA XSR900, YAMAHA XSR700, YAMAHA TRACER GT, YAMAHA NIKEN, YAMAHA TRACER900, YAMAHA SR400
A Touring SEROW is equipped. Unstable, probably because there are few crawler bearing areas, although the Indicator was attached to the Light-cowl upper part for the Antennas before at the circumference of a Meter. If it fixes to a Mount, it will be set
A Touring SEROW is equipped. Unstable, probably because there are few crawler bearing areas, although the Indicator was attached to the Light-cowl upper part for the Antennas before at the circumference of a Meter. If it fixes to a Mount, it will be settled with a Refreshing and a problem will be solved. View detail
If angle adjustment can be carried out, it is perfect one more place, so that it can attach also with a slanting place.
If angle adjustment can be carried out, it is perfect one more place, so that it can attach also with a slanting place. View detail
By the delivery service by motorcycle, it is common, and attaching ETC attaches this Antenna stay and it has been using ETC recently. Angle adjustment was also completed and attachment was dramatically completed in the Simple. Since the raw material
By the delivery service by motorcycle, it is common, and attaching ETC attaches this Antenna stay and it has been using ETC recently.
Angle adjustment was also completed and attachment was dramatically completed in the Simple.
Since the
raw material is also solid, there is also no corrosion so much, and it begins to use, and becomes for about eight months, but there is no Rust, and I purchase and think that it was good.
It is a place where a thing also with the cheap
price is quite attractive!
View detail
as [ be / already / a Compact / somewhat sufficient as the board which sticks an ETC antenna ] (in the direction [ Especially ] of order) It worries about whether it will delete with the sanding machine, or it leaves as it is, and is inside.
as [ be / already / a Compact / somewhat sufficient as the board which sticks an ETC antenna ] (in the direction [ Especially ] of order)
It worries about whether it will delete with the
sanding machine, or it leaves as it is, and is inside.
View detail
He wanted to make an ETC antenna & Indicator into a Handle mount, and it was purchased. Although that made from DAYTONA was also considered, it is decided in respect of a price that it will be a KIJIMA. (compactness -- if -- although it is DAYT
He wanted to make an ETC antenna & Indicator into a Handle mount, and it was purchased.
Although that made from
DAYTONA was also considered, it is decided in respect of a price that it will be a KIJIMA.
(compactness -- if -- although it is DAYTONA ...) --
-- use good point
and Bracket -- use an antenna installation part -- there is wall thickness of a component firmly --
There is likely to be intensity.
The degree of freedom of
and installation is high.
(Although joint form is bad and a motion has restriction in part, it will OK, if the
joint is deleted) Although bad
point
and Laser cut are carried out, since it does not bevel, the BALI remains, and it is
. Those with a possibility that it may be suddenly injured.
Considering only
and an ETC antenna, an Antennas setting face is too large.
If it manufactures with an Aluminum in itself (except for Screws) and alumite treatment is carried out, a color
Variation will also increase and I will think that it is by OK. [
]
View detail
It is used for attachment of the Antennas portion of ETC. Since it was first called double-stick tape, it became uneasy with OK one or ?, but it is too powerful, and it is so powerful that ? is thought [ Is it welding / Which is No Problem / ra
It is used for attachment of the Antennas portion of ETC.
Since it was first called double-stick tape, it became uneasy with OK one or ?, but it is too powerful, and it is so powerful that ? is thought [ Is it welding / Which is No Problem / rather? ].
I consider [ being able to be just going to do, splitting so that an angle may be formed and it may not interfere in it, when it is easy to carry out angle adjustment and interferes by a Navigation etc., although it is a place with this sufficient Stay, and ].
Although I myself attached the Navigation and interfered with the Antennas of ETC, the angle of the Stay was able to be formed and the Navigation (being use within the limits) was able to be attached safely.
I think that it is a Stay which may be various since what is necessary is just to only remove even
double-stick tape.
I think whether also obtain a price and to become somehow for a while also by
.
View detail
It purchased for angle regulation of an Antennas. It has inserted between Meters like the photograph. It is a Recommendation at Ney Kit.
It purchased for angle regulation of an Antennas.
It has inserted between Meters like the
photograph.
It is a Recommendation at
Ney Kit.
View detail
He wanted to carry out the Handle mount of the Antennas of an Antennas discrete type, and it equipped with it. Kana which was the cheapest although the DAYTONA and the Bosch were also taken out to the same product A degree of freedom is in the
He wanted to carry out the Handle mount of the Antennas of an Antennas discrete type, and it equipped with it.
Kana which was the cheapest although the DAYTONA and the Bosch were also taken out to the same product
A degree of freedom is in the
fixing position and an angle, and it does not take pains over wearing.
Structure is also solid and it can fix firmly.
View detail
Also in themselves, all surrounding friends are also using this. You may be easy to attach.
Also in themselves, all surrounding friends are also using this.
You may be easy to attach.
View detail
An ETC Handle Mount stay is attached also to the portion across the Handle . -- the attachment Bolt of the Type which can do removal simply because of theft prevention since it is merely an ETC integral type, and -- if the atta
An ETC Handle Mount stay is attached also to the portion across the
Handle
.
-- the attachment Bolt of the Type which can do removal simply because of
theft prevention since it is merely an ETC integral type, and
-- if the attachment Bolt of the Type whose removal is simply impossible can
choose, I will think that it is good.
If it can do after
and height can also be adjusted to a slight degree more highly, I will think that it is good.
.
.
View detail