Reviews
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg
PMC Seat looks good but not most comfortable
The PMC Tuckroll seat looks great. It is very lightweight also. However it has a particular fit and for me was not very comfortable. It as a pronounced scoop in the rider's portion and it limits movement of the rider while compressing the crotch area. For a male the presure on the crotch is especially uncomfortable. The cover material is also a bit too slippery. I imagine it's good for waterproofing but while aggressive riding it slips. View detail
Fits: KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1100, KAWASAKI ZRX1200
Very Nice
Very nice compliment to the Pod filters. It gives more storage and blocks the gap. It is also a nice thick quality. Just be aware that the fact that it is mounting on the tank bolt only means that it is not very positively located especially at the bottom. but it doesn't matter too much as you shouldn't put very heavy items in there anyway. View detail
Changed from Normal seat
The Eliminator is popular for its good footing, but … it was a little low for me and my feet were cramped, so I introduced this Seat.
I was honestly surprised to see such a change just by going up 3 cm from NORMAL.
I have been using it for a few years now, and I am very happy with it.
View detail
UrbanGSParis-Dakarization
It's a standard Custom, Parenthesis is good. I don't know the effect of wind protection yet, but I think there is some because NORMAL is not there. The main thing is the appearance design. View detail
Fits: BMW R nineT, BMW R nineT Urban G/S, BMW R nineT scrambler, BMW R nineT Racer, BMW R nineT Pure
UrbanGSParis-Dakarization
I wanted to add a top case, so I did. It looks good and sturdy. View detail
Fits: BMW R nineT, BMW R nineT Urban G/S, BMW R nineT scrambler, BMW R nineT Pure
UrbanGSParis-Dakarization
I bought it for Single Seat. I bought it for Single Seat and now it is Stock because it is Tandem. View detail
It's really just a dress-up.
As Title
When I get on it, it's the first range I see when I look at Meter or something.
It is a Recommendation for Carbon lovers.
I'm not sure about the installation, as I left it to the store for inspection Timing,
BOLDOR 2009.
View detail
Custom look
The Instruction Manual was also good and easy to understand.
If you are not confident about the installation, you can use Shop.
I think you should ask for it... ♪
View detail
Rear looks great!
The Rear of the Left Side of the MONKEY was lonely, so I replaced it with this product and now the Rear is Polished and looks great! (^^) /
The quality of the plating is good, not only on the front side but also on the reverse side, and the entire surface is polished.
I am glad I bought it because it is reasonably priced and looks very different.
View detail
Tightened.
This one comes more firmly than the OEM Silver.
Quantity at the price at the time of purchase:Pair (for Left and Right) It was a little over 6,000 yen.
Seat and side covers must be removed for installation.
View detail
Fits: HONDA CB400SF VTEC, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR REVO, HONDA CB400SF VTEC REVO
If only it were a little deeper.
The bottom is open so you can change the Oil as it is, but if it were a little deeper in terms of design, I would give it 5 stars. View detail
Fits: BMW R nineT scrambler, BMW R nineT Pure, BMW R nineT Roadster, BMW R nineT Urban GS, BMW R nineT Urban GS
UrbanGSParis-Dakarization
The quality of the kit from UNIT garage is good, not to say Japan, and the paint and decal on the tank are also good. The finished product is a very good parenthesis and it became a different motor cycle. View detail
Installed on SEROW250.
It was possible to install if only the protruding part connecting the OEM Fender and Headlight could be avoided (I used a nipper to cut it off). (^_^;) (e.g. "I'll be back")
FenderRear also manages not to contact the vehicle body
Compared to the OEM, it is shorter and less susceptible to wind, and I feel that it has reduced dizzying when running.
Design was also MATCH with the car body and got tired of OEMSpec.
This is a Recommendation for those who have come to the site.
View detail
![[G-Series]Seat Assembly](https://img.webike-cdn.net/catalogue/images/120000/1_TS.jpg)
Myoga Seat
I can't get the device to work at all and I'm returning it, worst case scenario. View detail
Kawasaki genuine Rear Rack
This is the genuine Kawasaki Rear Rack that everyone knows. This is for people who value appearance. The loading area is narrow and has a trapezoidal shape when viewed from above, so you may need to be creative when loading larger items. If you often go on long touring trips, we recommend bikes from other manufacturers (Daytona and SP). I only use it for commuting, so I'm very satisfied with this. ---------------------------------------------------------- This is the genuine Kawasaki Rear Rack that everyone knows. This is for people who value appearance. The loading area is narrow and has a trapezoidal shape when viewed from above, so you may need to be creative when loading larger items. If you often go on long touring trips, we recommend bikes from other manufacturers (Daytona and SP). I only use it for commuting, so I'm very satisfied with this. Powered by Google Translator View detail
Added photo of the bracket portion of the installation.
I didn't have a picture of the Bracket part of the installation when I posted last time, so I added a picture anyway. Just for reference. View detail
Fits: DUCATI PANIGALE 899, DUCATI PANIGALE 1199, DUCATI PANIGALE 1199 S, DUCATI PANIGALE 1199 R, DUCATI SUPERLEGGERA 1199
Standard Custom
About 5 cm higher than OEMScreen? It's about 5 cm taller than the OEMScreen, so it's more effective Large on the highway and looks better. I'm not a CircuitUser, but I'm satisfied with Large. View detail
I did it anyway.
Slip-on lineTruck di, and I put it on!
The look of the first Silencer in the shape you're interested in is self-satisfying.
It is not too much, but it is something better. By the way, as soon as I put it up.
The material is aluminum, so it looks like a cord when peeled off.
I hope that the heat will make it disappear. I hope the heat will make it go away.
View detail
The written Size is different.
The size is written, but the length was 75mm. The width is
Is there something about Sticker, or is there a notation?
Photos are uploaded for reference.
View detail
For a casual dress-up look
Used for KSR2 (B6).
I purchased this product not only for its function as a protector, but also for cosmetic repair of oil tanks, which inevitably deteriorate and become yellowish and not so good looking.
The Protector I received was simple, but when I assembled it temporarily, it fit the car body without any problem and the screw holes were perfectly positioned. When I tightened the oil tank using the long screws provided, I could feel that the oil tank is securely guarded. It depends on the individual body of the vehicle, but on my KSR2, there was no interference with the fork outer even when the handlebar was fully locked to the left position. I am very happy with the exquisite clearance. I think it might touch if it falls down and there is a strong impact, but it would be the same without Protector.
I was so happy to see the glimpse of Carbon through the gap of Shroud. I am glad I bought it.
View detail