Reviews
Before you run out of Wire!
If you don't have a Nozzle made by Gold on hand, you might consider purchasing one.
It is easy to use, but for those who don't maintain it that often, it tends to be a hassle and useless.
Well... I think it would be better to have it to give a sense of maintenance, or not.
View detail
It can be used normally
Used for maintenance of Clutch Wire.
Parts cleaner, OilCleanerretc., and other smooth products can be used without any problem.
When I used Super Wire Grease from YAMALUBE, the grease was so thick that I could not use it properly.
View detail
This is as good as it gets.
It is easy to use as a tool, and actually using it changes the resistance when pulling.
However, if the resistance changes, Wire must have deteriorated to some extent, so I stopped using it after that because I felt that it would be better to replace it properly than to cheat by using a fake blade.
View detail
[the attached vehicle type and mileage] -- vehicle type: -- benly 90S (frame numbered machine: HA03-1600XXX) mileage: -- it purchased to the grease up of about 15000-km [reason for purchase] wires (an axel, a front brake, a clutch). [Comment and cauti
[the attached vehicle type and mileage] -- vehicle type: -- benly 90S (frame numbered machine: HA03-1600XXX) mileage: -- it purchased to the grease up of about 15000-km [reason for purchase] wires (an axel, a front brake, a clutch).
[Comment and cautions at the time of attachment] There is no fault in a motion of wires and I thought that grease up might still be unnecessary.
However, the slide became good, so that he was surprised, and after grease up became very good [ a usage feeling ].
Although the grease up work of a wire was not difficult and was carried out, troubles were suffered comparatively.
After a fundamental work procedure loosens and removes a wire, grease is only poured in using this product (wire injector).
In my case, pains was taken over pouring of grease.
Attaching a wire injector certainly was a hang which works well.
It seems that it is good to once stop pouring and to reattach an injector when grease blows off.
In order that a tool might remove wires other than an injector, the open wrench (8, 10, 12 or 14 mm) and the phillips screwdriver were used.
Special care of the grease up work of a brake wire and a clutch wire was not carried out.
However, because the die length of the wire which can be pulled out was short, attachment of an injector was moved by carrying out difficulty for some.
An axel wire (in the case of the benly 90S) has an exit in the inside of a carburetor.
Grease up was performed after removing the throttle bubble portion, before pouring in grease.
In addition, the KURE silicon grease mate which invades neither a rubber nor resin was used for grease.
View detail
HANG is there.
It is sometimes difficult to use the Oil in a normal way.
It will go in when you adjust the tightness and the amount of oil blown out.
It may be a matter of familiarity.
It didn't work at first, but now I know how to use it.
View detail
It is a Wire injector of necessaries at a Wire Grease up. If there is nothing when there is this, the efficiency of work is completely different. Although this product serves as a two-point stop and it is easy to fix a Wire, especially a
It is a Wire injector of necessaries at a Wire Grease up.
If there is nothing when there is this, the efficiency of work is completely different.
Although this product serves as a two-point stop and it is easy to fix a Wire, especially a Grease leaks than expected, as for a thread type-like Wire, a tip leaks easily.since -- the end of the Injector is stopped with cloth.I think that it will become easier-to-use if it becomes a raw material which fits when it shuts for the raw material in which the Rubber of
Wire fixation is a little softer.
View detail
Wire lubrication will become easy if had. Although how depending on which it uses at first leaking was not found well, it was because it did not have a path of a spray nozzle. Since the spray nozzle of the wire oil of a daytona was thin, when usin
Wire lubrication will become easy if had.
Although how depending on which it uses at first leaking was not found well, it was because it did not have a path of a spray nozzle.
Since the spray nozzle of the wire oil of a daytona was thin, when using it, having changed for other nozzles, it went well.
The gas of a spray decreases, and even if a gas-pressure cable is weak, there is nothing in a skillful stake.
If oil falls out to the opposite side at a stretch, it is pleasant.
View detail
When there was nothing than saying that it is convenient with it being, wire maintenance could not be made at all. It is not so expensive, either, and once he buys it, it can use for a long time. Since grease flows at rain or every car wash, I wou
When there was nothing than saying that it is convenient with it being, wire maintenance could not be made at all.
It is not so expensive, either, and once he buys it, it can use for a long time.
Since grease flows at rain or every car wash, I would like to make brisk maintenance of a wire part as well as a chain.
They are goods indispensable to wire maintenance.
View detail
It was used for lubrication of the wires of an africa twin. The smooth has been lubricated with the clutch wire and the chalk wire. However, the end of the tube of the axel wire of return is a nut, cannot insert by a wire injector, and cannot use
It was used for lubrication of the wires of an africa twin.
The smooth has been lubricated with the clutch wire and the chalk wire.
However, the end of the tube of the axel wire of return is a nut, cannot insert by a wire injector, and cannot use it.
Please care about [ that it cannot use and ] a special-shaped wire.
If the accelerator grip part of PS. africa twin is decomposed and a wire is removed, as it is, a wire will be short and will no longer be assembled well.
In order to assemble, it is necessary to pull out a wire, and it is necessary to once remove the wire end of a carburetor portion for that purpose.
The gas tank needed to be removed to do the work.
. .
. .
View detail
It purchased for wire lubrication. If there is this, lubrication can be easily done for a wire. however -- firmly -- an injector -- a bundle lump -- since it will flow backwards if it does not lubricate carefully, cautions are required. A thre
It purchased for wire lubrication.
If there is this, lubrication can be easily done for a wire.
however -- firmly -- an injector -- a bundle lump -- since it will flow backwards if it does not lubricate carefully, cautions are required.
A three stars will estimate from the above point.
View detail
It purchased in order to pour oil into a clutch wire, an axel wire, etc. Since it was cheap, there is no complaint, but you may not be such showy tone. Usage acts as a husband of the wire, and inserts and fastens with an injector. If CRC is po
It purchased in order to pour oil into a clutch wire, an axel wire, etc.
Since it was cheap, there is no complaint, but you may not be such showy tone.
Usage acts as a husband of the wire, and inserts and fastens with an injector.
If CRC is poured in after that, it will go into inside pleasantly.
If this instrument does not exist, it says that lubrication takes time considerably, or the skillful thing for which thing oil is applied is impossible.
Since the clutch wire whose motion was astringent comes to move to a smooth, it is a recommend.
The recommend of lubricating periodically is carried out.
He is lubricating every 500 km.
View detail
They are necessaries when the vehicle type, especially clutch with which it is necessary to lubricate a wire are a wire type. It is the shin without being thought in lubrication, without using this although there are some leaks in the case of lubricat
They are necessaries when the vehicle type, especially clutch with which it is necessary to lubricate a wire are a wire type.
It is the shin without being thought in lubrication, without using this although there are some leaks in the case of lubrication.
View detail