Reviews
15-16 not followed
I have an S1000RR16 and the gold part interfered with the shift lot I couldn't install it
Probably not even a 15 year old
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA GTR125, YAMAHA GTR125Aero
The Touch on Brake has changed
The Lever ratio naturally changes, so the Touch of Brake is better
I made Titanium, so it looks more luxurious and Brake is also more expensive than the OEM It's a little bit short, so the operability is improved
View detail
Fits: BMW S1000XR, BMW HP4, BMW S1000RR, BMW S1000R
Oil leak after installation
Engine cover, Clutch cover, Front sprocket cover3 I bought it to unify the points with SSK, but unfortunately, the day after I installed it, my Oil went off It was oozing, so I tightened it up, but it didn't go away
I tried to go back to OEM, but the bolt ran out of screws and it broke off and I couldn't do anything about it I had to have it removed at the Dealer (labor costs and tears) Too bad!
View detail
High accuracy and stability at the time of grounding has been increased
This Redea Stand End is more accurate than the other Manufacturer's that I have used before is high, and the clearance between the STAND base and the surface to be fixed is tight It is no longer necessary to bite the ground Also, there is a ditch on the back of the end for drainage, but this will prevent it from biting the ground I think we're doing well
Installation is just a Hexagonal Wrench with bolts to hold the washer in place But there is no rattling
The S750 is built on the bottom of the STAND I took a gold mallet and mashed up some pipes at random I think this kind of Stand End is a necessity for safety It is a good choice I chose Black, which is less noticeable to me, but the construction is good, so even if it's in other colors, it's not too subtle It could be a CustomPoint
View detail
Appearance preferences
The Grip is stiff and can be tiring for long periods of time Still, I bought this one because it looks good I also use the Frame Slider from the same brand and the part accuracy itself is not bad
Titaniumium color is a color for the FOR JAPAN MODELManufacturer It's a little thicker than the one in the original
(There was a bit of a problem with the Slider's installation, but I'll skip it here as we're talking about a different product)
View detail
Fits: HONDA MONKEY125, HONDA GROM, HONDA GROM
Tightly, tightly
Dissatisfied with the grom levers and was looking for a short lever, finger quantity:It's a perfect fit for a 2pc seat and has a non-slip shape and tightly structured It feels right This is the best Lever I've ever had and it's a pleasure to operate The price is a bit high, but in terms of quality, it's probably justified View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
RIDEA LV4
RIDEA LV4 Omega Short Foldable Knob Adjuster Lever Set (for Left and R） When I bought, the manufacturer had no goods and needed to produce now. I waited for 20 days because I knew that this brand was very good for making bicycles. Their products were also very good and exquisite. I was very confident about their products. Sure enough, when I received the goods, I opened it and saw it. It was very good and the workmanship was very fine. I like it very much. It helps to ride. I recommend you to buy it. View detail
It didn't work
use it for the Short Side Stand of ninja250 KIJIMA's Lowdown Kit When I tried to use it, I couldn't use it because the leg of SIDE was too small
View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-S125, KAWASAKI NINJA400 (2014-)
Expectations Ha Gap for the price
Hexagonal because the material of the cap's fastening part was plastic When I tightened it with the wrench, it was easy to lick and spin around So I can't tighten it firmly View detail
I can't put it on, so it's out of the question
The Left Side can be attached to the Left Side with the included parts, but
I can't physically attach the Right Side I couldn't attach it no matter what I tried
I've contacted the Manufacturer, but I thought you could put it on as is The reply, "I don't seem to know much about it The accompanying Instruction Manual also only explains the Slider on the Left Side No explanation for the Right Side, I thought it was defective, but Included Parts:No explanation for the Right Side Included:No description of the Left Side Slider, I thought it was defective, but it was only the bolts that fit the Left Side Slider
I've tried wearing it for a couple of hours, but it's impossible
This is the first time ever that I can't put it on even though it's a special product
View detail
It's called a warranty of conformity …
I can't physically attach the Right Side Slider
I contacted the Manufacturer and they said they will put it on as is
The bolts that are attached are only included on the Left Side, and they are also spec
View detail
Quality is good, but Cost is high
Bar end mirror installed
Can be fitted with OEM Bolts
OEM Bolt cover is Material:Since it's plastic, I think it would be more consistent in color tone if it was made by other Anodized products
Fitting and texture are fine, but the price seems a bit high
View detail
Fits: YAMAHA NMAX, YAMAHA NMAX 155, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX 155, YAMAHA NMAX155
For the price …
Parenthesis is good
Accuracy is not so good, and movement is a little reluctant
Parking brake parts are difficult to install and adjust, and I'm concerned about what I installed
There are likely to be other good levers for a similar price
View detail
Fits: KAWASAKI ZX-10R
It's all about the price
My own breaking is done with my index and middle fingers
I have a 2017 10RR, and with the OEM Brake lever, my index finger is just I had the impression that it was difficult to Brake because it hit the Curve part
So I chose the one with a loose Curve
As a result, it's just fine
If you've ever used a Foldable, you'll know that it feels uncomfortable when breaking I think
But this product is non-foldable without re-tightening (So-called OEM) It was wonderful to feel close to the
Loosen the Master CylinderMounting bolt and move it to the Left Side If I gave it up, I was able to bring it to a place that was close to ideal for me personally
View detail
Fits: YAMAHA MT-03 (2015-), YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03
Color good! There is luxury!
Installation requires taking a bit of trouble because you must remove SIDE's Cover.
However, the color of Combination of Blue and Silver is good, shape is also Fashion and luxurious.
Small parts to Body's Black color but stands out as Shiningly.
View detail
I feel I got better looking face.
I really like the Engine of MT 09.
V type 2 cylinder with a history of cars going back (Buell) , Parallel four-cylinder (GSX-R1100)
It is good performance of taking a good point, both acceleration and Traction are just fine,
It's a fun engine to ride. (ECU rewritten according to Exhaust System)
However, there was dissatisfaction with the appearance and suspension around the front, around the Rear with Fender Eliminator
Tail lamp also has another shape attached.
The face of Front is also disappointing for me and it is cheap if you look at MT from the front
I felt it was full of pociousness.
We had been interested in Headlight cover of Redide for a long time,
Front We ignored ignoring reasons such as load increase, but others coming up one after another
I felt sorry for Gorgeous feeling of Manufacturer's similar ConceptMODEL
I decided to purchase it.
Install correctly.
Cheapness ceased and I liked MT more and more.
View detail
Try to install it
I installed it in TMAX 530 DX in 2007. The ground area became Large, and the sense of stability increased in places such as earth.
In the wearing picture, it was from the front, but there was no picture from the rear side, but I could not understand, but the tip of the presser foot floats a little.
I think that it is better to use glue on the Screw fastening part. Also, sometimes it is necessary to confirm that it is not loose.
View detail
Fits: YAMAHA MT-03 (2015-), YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03
good color
Material looks fine with beautiful Blue. Installation, SIDE Cover to remove Bolt
Since it will not come off unless it is removed, it took a bit of trouble.
View detail
Fits: YAMAHA MT-03 (2015-), YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03
Fashion
The color of Blue is beautiful, Balance with Body's Blue is also good,
I like it.. Installing with Spring and Ball will not fit in
I need a bit of hang, but if you push it a lot, it's ok.
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Versys 650, KAWASAKI ER-4N, KAWASAKI Ninja 650, KAWASAKI ER-6N, KAWASAKI ER-6F, KAWASAKI ZXR750, KAWASAKI ZXR750R, KAWASAKI KLX250, KAWASAKI D tracker, KAWASAKI Z800, HONDA GROM, HONDA CB1300 Super Four, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER BOL D'OR, DUCATI MONSTER696, DUCATI MONSTER796, DUCATI 899Panigale, DUCATI 1199Panigale, DUCATI MONSTER1100EVO
I decided on strength and design!
OEM is plastic, so I thought that there was thermal deterioration and so I exchanged it.
It's a bit expensive as Parts. Parts for Wire lock, there are holes, but use of Circuit
Because it is not used as it is.
It is fashionable Parts of peace & Pinpoint because it is strong Aluminum Gold.
I am satisfied with beautiful Red.
View detail