Reviews
Fits: YAMAHA MT-09, YAMAHA TRACER9 GT, YAMAHA XSR900
It is also good as Attachment!
I installed it on my Tracer9gt.
Y'sGEAR has released Core guard for each type of car, but this one is more Shiningly☆. (Lol)
Also, I emailed the manufacturer beforehand and bought it because they said it would be easy to install without having to remove any other parts.
It was really easy to install, looks great, and I'm very happy with it.
It is safe to say that the Radiator's performance has been well taken care of.
View detail
Radiator core guard/
The Design is excellent and the mesh is fine, so the cooling efficiency seems to be good.
These products are distinctly different from foreign-made products.
View detail
Excellent sense of security.
The mesh is very fine and provides a great sense of security.
Solid aluminum, looks parenthesis good.
View detail
Before Core goes under.
It is easily crushed when Large fine-grained insects hit it, so it is for prevention.
Design is also good.
Please note that the shape is different between 21model and earlier models when you buy.
View detail
Fits: Others
Best Matches
I was able to buy it at a low price on Sale.
Easy to install, just fit, looks strong.
It looks pretty good too.
Recommended Custom products.
I tried painting it myself.
I gave the protection 4 stars because I haven't run long distances yet.
View detail
Radiator guard
[How is it used?
Touring
Was the one you received as per Image?
Yes
Was the installation difficult?
I think you should remove the Cowl.
How was your experience with it?
Fits the Radiator without any discomfort.
[Included Parts:were they on?
Seal of Radiator guard
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
It is a pioneer and long-established company of Core guard.
I installed it on my ZX-25R.
Installation.
It can be installed without removing any of the Cowl.
The hang is to hook the upper three claws of the Core guard firmly to the upper side of the Radiator, and then tighten the Fixing Screw on the lower side.
If you tighten the screw without hooking the upper three claws tightly, the screw will stop with two claws hooked and one claw floating, and you will have to loosen the screw once more and start over (this is my example). So you have to loosen the screw again and redo it (my example). Even if this happens, it is not difficult to redo it because the installation method is simple.
Product finish.
It is very well made and the mesh of the Core guard has different sizes in the middle and both sides for both cooling and protection.
Pioneer of Core guard, long-established
Etching factory (EF) is a pioneer and long-established company in Core guard production.
Now he is also making the Core guard for the MOTO-GP Works machine.
The cosmetic box in which the product is contained also has a sense of luxury.
I'm glad I bought it
View detail
To protect the Core
Although I bought the Core guard sold on Amazon.
It was something that blocked most of the air and inhibited the cooling process.
Buy this Core guard
I think this Core guard will let a good amount of air through.
View detail
Very good product
I installed it when I took delivery of my KawasakiZX14RHigh-grade2019MODEL. The design of other products is flashy, but I decided to use this product because I thought it would fulfill its original role with a simple design. The price is high, but it is a good product without mistakes. View detail
Installed while the car was new.
This is the first time I've used this product on a new car. View detail
It's well thought out.
I chose Etching factory because I like the different design of the center part and the side part to match the characteristics of the motorcycle, and I like the playfulness of being able to choose the color of the mark under the core guard. View detail
For protection against Radiator damage.
If you drive on highways or circuits, it is better to install it first. View detail
Fits: HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS
Focus on appearance
Easy to install and dress-up.
I'm not sure about the defensive properties, but don't make it a very thick product.
I think it's good enough to protect against bugs, stepping stones, etc.
The other company's Radiator gart that others have been wearing seems to be thicker and more protective.
This one looks better.
View detail
Quality and accuracy are very good.
If you can remove the cowl while referring to the video on YouTube, it is easy to install. I think it has a nice feel to it. The price is high, so I was prepared to pay for the gold, but I'm glad I did. View detail
Essentials after the break-in period
A must-have for every new car. I don't like the ones with a pattern on them, so I selected this one from Simple. The fins on the current Radiator are so small that it's hard to fix them. The manual is enclosed and easy to install. Just hook the top claw and fasten the bottom with the enclosed Bolt nut. View detail
Just fit.
Just like the OEM Product is just fit.
The oil cooler guard was installed at the same time.
It's quite a Gold amount, but it feels strong and secure.
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09
I'd love to see you take delivery of the car.
I installed this product because I was worried about the damage of the Core Guard and I like it because it is not too obvious. The Core Guard is a solid product and I am very satisfied with it and I highly recommend installing it at the time of delivery, although the damage to the Core Guard will be difficult to see. View detail
Price is high, but I'm satisfied with the quality and accuracy.
I bought it because it looks and performs well in the CB1000R's Core guard.
The mesh is fine and does not interfere with cooling + seems to have the ability to prevent small stones etc.
The price is high, so it's not a good cosmetic product, but I'm happy with the texture and accuracy.
The Instruction Manual says to remove and install the two bolts.
It is difficult to install the Radiator unless you remove the cover on the side of the Radiator in addition to the specified Bolt.
The installation itself was easy, although the Instruction Manual is a little unfriendly.
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09
For those who are worried about dirt, bugs and stone splatter on the Radiator.
I bought it because I'm very concerned about the dirt at the Radiator and the mud splatter in the middle. Even if you wash the car, it doesn't rub off as much as you'd like and it doesn't come off clean. And of course, I didn't want stones and bugs to get into it. By installing this product, the above problems are almost gone. Some of the other products have XSR Logo in them, but I didn't like the flashy ones, so I bought this one. The price is high, but I'm happy with it. The dimensions are consistent. I think it takes about 10 minutes to install. I purchased Silver originally, but I thought that Black was better, so I purchased heat resistant paint Spray at home center and changed it to Black. View detail
I'm glad I bought it!
The Radiator core guard is always installed, but I have my own obsession with it, and the one with the Brand logo blocking the vents is not an option.
Since it is a functional part, we try to choose products that are simple and have different sizes of vents.
This time, the brand I usually buy from didn't have a release for the Ninja 1000SX, so I chose the Etching factory that fits the requirements.
Product feedback after opening the package, nice job (lol).
First time I bought it and it is as good as its reputation.
Bulk parts are Material:Stainless Steel, it's not just a Nut, it's a J-Nut for ease of use. Moreover, it is perfect that it has anti-vibration rubber.
I like the fact that the price is unchanged even though it is CostUp above Spec.
As for the installation, the Ninja1000SX is designed so that the front inner fender cannot be removed by itself and there is no space to work on the core guard.
If you don't want to hurt them as our predecessors have said, you'll have to take all the side cowl off, even if it's a hassle.
If the Cowl comes off, the rest will be easy, I thought, and then I hooked the top end and put the anti-vibration Rubber to the top and bottom terminals before fixing it with J-Nut & Bolt.:It is necessary to set it, but since it is a small and long part, dexterity is required.
I have to redo this process several times just to get it right.
If you can install it according to the manual, you won't hear any unwanted vibration noise when driving, and I think it's a well thought out product.
If you dare to point it out, I thought it would be better to illustrate the mounting position of the Rubber not only in the text, but as an example of mounting.
The above is the evaluation of someone who has had the experience of making a scare noise at a certain RPM when I put on a certain company's Core Guard and took measures on my own.
View detail