Reviews
I'm going to do some work around Stem.
It is essential for maintenance around Stem.
The service manual states You'll use all the springs, you'll pull the torques, you'll get rid of the torques. but it was too much trouble.
With this Socket, you can use ordinary torque wrenches and it is very easy to use Large.
The adjustment of the Stem Nut has a strange craftsmanship aspect to it, and it's not easy to get it right if done by an amateur, but I was able to maintain it to my satisfaction with this one.
View detail
3
I bought it to adjust my SUPER CUBc100's valve clearance.
The tool to adjust the square clearance is good, but I think regular glasses are better as they are hard to turn when tightening the 9mm Nut.
I thought it would take some getting used to.
View detail
It makes Tappet adjustments easier.
I've been playing with MONKEY for over 40 years, and I've been working exclusively with Spanner and Radio pliers for Tappet adjustments.
It's enough to get used to it, so I didn't want to actively introduce it, but this time I bought it in conjunction with other products to get the points accumulated and free shipping.
So, I tried it right away …
As expected, the SST (not to mention … (Lol) The Tappet Adjust Screw is much easier to adjust and fix with this Wrench than with the Radio pliers.
I think that even a beginner can certainly make Tappet adjustment by using this Wrench in the work which a skilled person can manage.
I thought the lack of hassle would lead to motivation and SkillUp … (Lol)
I don't mind not having it, but I don't know why I didn't buy it sooner.
View detail
Convenient for Tire Removal
The size is 17mm, 19mm and 21mm, so it can correspond to the wheel nut of the domestic passenger car and is very convenient. It takes a lot of space to put it, but it is a useful tool that you need to have. View detail
สินค้าดีคับใช้งานได้ดีจัดส่งก้อเเล้วคับชอบๆ View detail
Thick and not suitable for fast turning.
The grip is thick. This thickness makes it difficult to turn quickly and is used infrequently. It is not easy to turn the tool quickly. The Grip is not a perfect circle, so it is easy to use. This tool is used only for that purpose. View detail
The best
I think KTC and ko-ken are the twin peaks of TWrench. For my own taste, I like the 8mm slimmer than the KTC. It has the right amount of flexure. The rotating balance is also perfect, as the Nepros are too expensive for the average person to afford. That's enough. View detail
It's a shame
Time is of the hour, kowa tools like Large, but this Twrench 12 is the tip The box outer diameter is a little bit large. Because of this, KTC and koken's Twrench can be used and this Twrench cannot be used. Situation. You can say that durability is important, but there are many situations where you can't use the situation in the first place. It is. I'm sure it was good in the past, but as the years go by, ToolSpace is getting tougher and tougher. It's a shame, because the quality of the thing itself is high. 。 View detail
Big Nut and cheap
I usually use Socket wrench
I didn't have a Socket to remove the Nut or Bolt of this size, so I bought it
However, the clutch lock nut has a high torque, and it was difficult to put pressure on it because of its shape Difficulty
Maybe I should have bought the Large KiSocket, even if it was a little expensive
View detail
Is good
Inexpensive but easy to use; if you want to torque-manage Stem, use the torque wrench Quantity in 90-degrees for:You don't have to do complicated torque conversions because you can set it View detail
For Fork cap only:a good product for an itchy area
Functionally, it is no different from Straight's Glasses Wrench, but
Material to avoid scratching the Fork cap:Plastic
32mm is not a size that we use very often
I used to protect it with Dustcloth and tighten it up with Pliers wrench
It's still easy to use special products
View detail
Almost satisfied
I used it to invert the KYB
If you don't want to make the anodized part of a normal Gold genus Wrench into a mess, this is the one! re
While there are some cosmetic questions, the satisfaction with the work done is passable
View detail
It is Large size for portable (car), but it is convenient for daily use
The short Handlebar length makes it easy to handle
On the other hand, it is too short to be useful in forceful situations, but in that case, you can use the Handlebar part of the I think it is possible to support up to a certain level of torque by using the
The paint on the surface is rough and the finish feels poor, but considering the price, I can't complain
It's a THandlebar, so there's no need to be concerned about it, just a moderate one
It's better to turn the force (Oh Gold) towards the Socket that makes contact with Bolt/Nut I think
View detail
Fits: HONDA CB50, HONDA MONKEY, HONDA DREAM50, HONDA DREAM50, HONDA DREAM50, HONDA SUPER CUB 50, HONDA GORILLA, HONDA APE 50, HONDA APE 100
Would you like to be without it?
I bought these glasses after watching a video of someone else using them, but they're a great pair of Offset large glasses Wrench and Driver are easier for me to work with
The price is pretty high, too
View detail
Daytona, as expected
I bought my first MONKEY Daytona bore up kit View detail
It is largely satisfactory
YB-1 (2st) It's a special tool for Casting Iron, so I used it to remove and install the exhaust system on my The size was perfect and felt comfortable in my hand Since it is an universal tool, it is hard to run into the screw part and it is thin and hard to turn It is a very good product The price is inexpensive at about 2,000 yen, so you can feel secure if you have one View detail
Sorry again
I haven't used this one either..
But it's absolutely necessary, because I definitely don't want to be covered in scratches with Gold genus Wrench
Cosmetically, it's a good product and not a bad buy
I'm not using it, though
View detail
Beware of those who replace the Plug with TL125
TL125IHATOVO or later MODEL's, purchase to Plugfor Replacement I did
However, as a general comment, the Plug could not be replaced
View detail
It's pretty normal
I'm using the DRC one, but I wanted to try the KTC one and bought it DRC's is definitely better in terms of ease of use! 。 I thought it would be easy to use because of the thick body part, but the thickness of the body part was a problem and was difficult to use I don't regret it too much because the price is so cheap, but … View detail
The peace of mind and cost effectiveness of an OEM
Hook wrenches are hard to use if the size doesn't fit, but the WR250R's I bought it because it was recommended in the Service Manual for maintenance and because it was recommended in the Service Manual Because it is only OEM, there is no size that does not fit, and Slotted It's not as mentally unpleasant as poking Small with a screwdriver, and it's safe to use I think The build quality is good, but it's solid It is a little thick, so it may be difficult to fit in some places View detail