Reviews
Fits: BMW HP 4, BMW M 1000 RR, BMW S 1000 R, BMW S 1000 R, BMW S 1000 R, BMW S 1000 RR, BMW S 1000 RR, BMW S 1000 RR, BMW S 1000 RR, BMW S 1000 RR, BMW S 1000 XR, Others Universal, BMW M 1000 R, BMW S 1000 RR
I am satisfied
Even though the overall quality of the S1000RR is high.
Oil Filler Cap is very normal (laughs)
It is also a Recommendation because it can be a One Point.
Gill's even handles OEM parts for BMW.
The accuracy is assured because it is a reliable manufacturer.
Since Coloring is self-fitting,
Taper Direction Notes.
View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA YZF-R1M, YAMAHA YZF-R1M
The footpeg is not as slippery as it should be.
Above all, the footpeg section is less slippery compared to OEM.
If you run your finger over the OEM, it slides, whereas this one wants to bite into the prongs.
The fabric is sharp enough to catch on the footpeg when the shin part of the leg is touched by the footpeg while waiting at a traffic light.
This made the footpeg more secure when loaded and easier to ride.
The texture was good, and I was overwhelmed when I opened the package.
The footpeg position is far more flexible than other companies, and can be used as a simple dress-up since it can be set to a position equivalent to that of the OEM.
I am using it with the Largeest limit lowered and raised.
View detail
It's great.
The quality is good, Designma good. I hope it will not be active ^_^ View detail
Fits: BMW HP 4, BMW R nineT Pure, BMW R nineT Pure, BMW R nineT Racer, BMW R nineT Scrambler, BMW R nineT Scrambler, BMW R nineT Urban G/S, BMW R nineT Urban G/S, BMW R nineT, BMW R nineT, BMW R nineT, BMW S 1000 R, BMW S 1000 R, BMW S 1000 RR, BMW S 1000 RR, BMW S 1000 RR, BMW S 1000 RR, SUZUKI GSX-R 1000 R, SUZUKI GSX-R 1000
Genuine Gilles Tooling Brake Lever Guard for GSX-R1000
This bike was going to have it's first track day and needed by UK track rules that a lever guard must be fitted. There a re a lot of brands out there that provide the same kind of lever guard but this was the specific brand the cutomer wanted. Findingf the right part ws not hard as I just used the tools Webike provide in their help section and then cross referenced with Gilles Tooling website. The price was fairly average but as I was already ordering some items from Webike, I decided to get this lever guard as well. My preferred courier is EMS as they just get my orders to me fast. This prder arrived in 5 days from being shipped. The lever guard came in the standard Gilles box and came with a host of instructions and all fittings needed. The lever guard itself is a very well machined part. The precision is superb, it has a lovely finish which is very tactile. It already comes with a bar end fitment and is a 2 part guard. Thsi is a very sturdy part and would take a lot of force to hinder the actual brake lever which it protects. Very happy with this purchase and it fitted really easily as you would expect from Gilles Tooling. Thanks Webike. View detail
Fits: HONDA CBR 1000 RR, KAWASAKI Ninja 400, KAWASAKI Z 1000 SX Tourer, KAWASAKI Z 1000 SX, KAWASAKI Z900, KAWASAKI Z900, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS, KAWASAKI Z900RS, TRIUMPH Speed Triple 1050 ABS, TRIUMPH Speed Triple 1050 R, TRIUMPH Speed Triple 1050 RS, TRIUMPH Speed Triple 1050 S, TRIUMPH Speed Triple 1050 S, TRIUMPH Speed Triple 1200 RS, YAMAHA FJ-09, YAMAHA FZ-07, YAMAHA FZ-09, YAMAHA FZ-09
Genuine Gilles Tooling Brake Fluid Reservoir Cap
I wanted to smarten up the bike with a few Gilles Tooling accessories and this was one I wanted. It is the rear brake fluid reservoir cap. Finding the right one was not hard but I did need to go through Gilles website and search that way. The price Webike had at the time of ordering was really good as they did have a sale on. With a couple more accessories I got all my order shipped together, this saves shipping costs on smaller items. I use EMS these days as they just get my orders delivered as soon as possible. The order was delivered in 5 days from shipping so you can't get much better than that. The order was well packaged and although the Gilles cap was in it's own well protected box, Webike took the time to make sure that there could be no damage to anything. A lot of bubble wrap was used which was great. The cap itself is a very very well machined part. The threaded section is super smooth, there is also a set of coloured rings you can use to put in the cap which might match your bike colour scheme. Very nice touch. A word of warning though, once you home the coloured ring you will not get that out without making a mess so choose wisely. Not a problem if you intend to keep the colour ring in place of course. I chose the red one btw. Anyway, there was not a problem fitting the cap as it literally just screws onto where the OEM one goes, that's it. Very pleased with the purchase so thank you Webike, very happy customer. View detail
Fits: YAMAHA FZ6 Fazer, YAMAHA FZ6, YAMAHA FZ6 Fazer ABS, YAMAHA FZ6 Fazer, YAMAHA FZ6, YAMAHA FZ-07, YAMAHA FZ-07, YAMAHA FZ-10, YAMAHA FZ1 Fazer ABS, YAMAHA FZ1 Fazer, YAMAHA FZ1, YAMAHA FZS 1000 Fazer, YAMAHA FZS 1000 Fazer, YAMAHA FZS 600 Fazer, YAMAHA MT-03, YAMAHA MT-07 Tracer, YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-10 SP
Genuine Gilles Tooling Engine Oil Filler Cap
This was also another one of the aftermarket accessories I had been meaning to get. This was the Gilles Tooling Engine Oil Filler Cap. Like my previous Gilles purchase, this was found to be in the sale so I grabbed the chance and added to the basket. It was not too hard to find the right cap for my oil filler but I did have to use Gilles Tooling website for that information. No bother really. With the other parts in my order, I got them all shipped by using EMS and they always get my orders to me fast. This was no exception, 5 days from being shipped from Webike warehouse and my order was at my door. Everything was very well packaged and kept safe with a lot of bubble wrap which pleases me. The filler cap came in it's own Gilles box and was already well protected. The cap itself is a well machined part and just like the reservoir cap, it has super smooth threads and a set of 3 coloured rings you can choose which colour suits your bike best. As before, choose well as you will not be getting the coloured ring out once you have it place without making a mess of the ring and the cap. With this cap and thre reservoir cap fitted it just ties in the Gilles stuff which is nice. The bike looks very sweet now and I am one very happy customer. Thank you Webike.n View detail
Abundance of Positions is the main advantage.
As mentioned in the Title, this Rear Sets is 1Quantity:5pcs. types of positions can be set. At this point, it is more flexible than those made by other companies. (though more expensive because of that). 。
On top of that, the OEM same etc.Position is also included, which increases the robustness of the Parts, smoothness of Shift change, and GEAR Chain accuracy, so there is no Demerit in the exchange.
Also, the fact that the position can be easily adjusted by simply removing the TorqueScrew1 pc is revolutionary, and the convenience is better than other Rear Sets because it is so expensive.
View detail
Genuine Gilles Tooling Shift Holder for Suzuki GSX-R1000 2005
I already have a set of Gilled rearsets on this bike and wanted to finish off teh look with a nice shift holder in the same brand. Gilles is a great brand and make some top quality products, much the same as this. I found teh right part by searching Webike site and cross referencing with Gilles website. The price Webike had this for was actually on sale when I got it and was better than locally. With some other parts in my order, I had all shipped using EMS and all arrived at my door in 5 days from shipping. The box this shift holder came in was perfect, the packaging of the entire order was superb. The shift holder is the titanium colour which matches the rear sets perfectly. It came with a full instruction guide and fitted really easily. By far, Gilles Tooling is one of the very best for most motorcycle parts and one I will ercommend all the time. Very pleased with how this looks and helps with the shifting. Great work Webike. View detail
Fits: YAMAHA FZ-10, YAMAHA MT-10 SP, YAMAHA MT-10, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA YZF-R1M, YAMAHA YZF-R1M, YAMAHA YZF-R6
GILLES TOOLING GTA Front Wheel Slider
Damage reduction to the vehicle in the event of a fall and was installed as a talisman.
Above all, it looks good and Parenthesis is good.
View detail
Fits: BMW HP 4, BMW M 1000 RR, BMW S 1000 R, BMW S 1000 R, BMW S 1000 RR, BMW S 1000 RR, BMW S 1000 RR, BMW S 1000 RR, BMW S 1000 RR, HONDA CBR 1000 RR, HONDA CBR 1000 RR, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI ZX-6R 636, SUZUKI SV 650 ABS, SUZUKI SV 650 X-Tracker, SUZUKI SV 650 X, YAMAHA MT-09
unobtrusive goodness
Nice thing
The design is casual and has no sense of being "custom"! It is a very casual design, and does not give the feeling of "I am customizing!
Four colors are included so you can choose your own.
The extra note on the English version is nice!
subtle point
I'm not sure if it's a good idea or not, but it's a little expensive.
It is difficult to change the color later without damaging it, so it is necessary to choose carefully.
Required tool
・Phillips Screwdriver
Any tool that can tap with Rubber. (Used to fit color Rings)
Overall, I am satisfied with the product.
Tension is increased around the handlebar because it is the most noticeable part of the bike.
Recommended for those who want a modest Custom.
View detail
Fits: HONDA CBR 1000 RR, KAWASAKI Ninja 400, KAWASAKI Z 1000 SX Tourer, KAWASAKI Z 1000 SX, KAWASAKI Z900, KAWASAKI Z900, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS, KAWASAKI Z900RS, TRIUMPH Speed Triple 1050 ABS, TRIUMPH Speed Triple 1050 R, TRIUMPH Speed Triple 1050 RS, TRIUMPH Speed Triple 1050 S, TRIUMPH Speed Triple 1050 S, TRIUMPH Speed Triple 1200 RS, YAMAHA FJ-09, YAMAHA FZ-07, YAMAHA FZ-09, YAMAHA FZ-09
One point
Nice thing
The black base color blends in without being obnoxious.
I like the color in One Point if you look closely.
The product comes in four colors, so you can choose the one you like best.
subtle point
It is a little expensive, though it can't be helped that it is an overseas product.
It is necessary to choose carefully because it is tough to change the color later with the Type to be fitted.
Required tool
・Hexagonal Wrench
With Rubber tapping tool, whatever it is. (Used to tap and fit the Ring)
Overall, I am satisfied with the product.
It is not something you would normally notice, but when you look at it from the SIDE, I think it is really stylish with a subtle one point.
Recommended for those who want a modest Custom.
View detail
The position adjustability with a single bolt is divine!
Naturally no Wobble at all! The texture is great! (Price is high, but ・・・・)
GSX1300R HAYABUSA's Body color is White and Accent is Red,
The Accent color of this Rear Sets is very cool with Match.
Position adjustment can be done with a single Bolt (T40), which is revolutionary and very convenient.
【attachment】
Torx bit is required for installation. (T40, T30)
If you have a Torque wrench, I think you can install it yourself,
If you are worried about installation on a car equipped with Quick shifter, you can install it at a store.
(The manual lists the installation distance in cm, so as long as you have Caliper, you can go it on your own!)
View detail
Fits: YAMAHA FZ6F azer, YAMAHA FZ6, YAMAHA FZ6 Fazer ABS, YAMAHA FZ6 Fazer, YAMAHA FZ6, YAMAHA FZ1Fazer ABS, YAMAHA FZ1Fazer, YAMAHA FJ-09, YAMAHA FZ-07, YAMAHA FZ-07, YAMAHA FZ-09, YAMAHA FZ-09, YAMAHA FZ-10, YAMAHA FZ1, YAMAHA Fazer8 ABS, YAMAHA Fazer8, YAMAHA FZ8 ABS, YAMAHA FZ8, YAMAHA FZS 1000 Fazer, YAMAHA FZS 600 Fazer
Genuine Gilles Tooling Sport foot peg set, pillion for Yamaha FZ1 2012
Having changed out the front rear sets the foot pegs they came with were great for grip and the rear also could do with changing to match and also for passenger grip. Not a hard part to find as these do fit a lot of different Yamaha models. The price was about the same as I could source locally but my supplier was awaiting them so I got them direct from Webike. There were a few other parts in my order so I got them all shipped together. EMS delivered my order in 5 days from shipping. Everything was packed well and no damage during transit. These foot pegs are a thing of beauty, the machining that went into them is fantastic, the foot area is super grippy and will not fail even when wet, (I know from experience). The glossy black paint finish is awesome and probably the best I have seen on foot pegs before. Not a hard job to fit, I used new cotter pins to add the foot pegs as the old ones were not great. The overall finish is better than expected. Thank you very much Webike, great job. View detail
Replaced Pipe Meter Bracket from DAYTONA
[How is it used?
City driving, touring, etc.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
Easier than DAYTONA's Meter Bracket
How was your experience with it?
Refreshing and good, I think the Meter is also easy to read.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
The price is too high.
Other items that would be helpful
The Meter Bracket from DAYTONA was easy to use, but the Pipe was not to my liking, and the Bracket from JvB had a good style, but the Throttle Wire was a little tight and the keys were hard to point, so I bought a Bracket from GILLES TOOLING this time. I bought a Bracket of GILLES TOOLING this time.
It might be better to remove the tuning fork Emblem and use Screw locketc. since it is a single Screw stop. It was a nut to prevent loosening.
View detail
Fits: BMW F 650 GS, BMW F 800 GS Adventure, BMW F 800 GS, BMW F 800 R, BMW F 800 S, BMW F 800 ST, BMW HP 2 Enduro, BMW K 1200 R Sport, BMW K 1200 R, BMW K 1200 S, BMW K 1300 GT, BMW K 1300 R, BMW K 1300 S, BMW R 1200 GS Adventure, BMW R 1200 GS, BMW R 1200 R, BMW R 1200 S, BMW R 1200 ST
Gilles lever set
First of all, it was delivered earlier than expected.
The shipping cost is also cheap, so I highly recommend it.
The packaging was sturdy and arrived without any damage.
There was no problem in assembling according to the vehicle model specified on the website.
I'm happy to buy good stuff at a good price
I am repurchasing or recommending to friends ------------------------------------------- --------------- First, it was delivered faster than the expected schedule, The shipping cost is also cheap, so I highly recommend it. The packaging is strong, so I arrived well without damage. There was no problem with assembly according to the vehicle specified on the homepage. I'm glad that I bought it at a good price Recommended for repurchase or acquaintances Powered by Google Translator
View detail
Fits: DUCATI Monster 1200 R, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Monster Dark, DUCATI Monster Stripe, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS, KAWASAKI Z900RS, SUZUKI SV 650 ABS, SUZUKI SV 650 X-Tracker, SUZUKI SV 650 X, YAMAHA FZ-10, YAMAHA MT-03, YAMAHA MT-10 SP, YAMAHA MT-10, YAMAHA MT-25
Nice cap, but does not fit US spec models
The cap itself is great, but it doesn't fit my US-spec motorcycle, unfortunately. I'll hang onto it and hope to find a new cap to put this on one day! View detail
Fits: YAMAHA FZ-10, YAMAHA MT-10 SP, YAMAHA MT-10 SP, YAMAHA MT-10, YAMAHA MT-10, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA YZF-R1M, YAMAHA YZF-R1M, YAMAHA YZF-R6
Gilles axle sliders YZF-R1
DOing a little bit of protection for the R1 recently and decided to go for the Gilles tooling axle sliders. I have used Gilles for protection before and have had really good results even after them getting some action. I found the correct part from Gilles tooling webisite and then searched Webike for the corresponding parts. Luckily, Webike do have quite a lot of R1 Gilles items in stock. Get in the basket. These were part of a larger order as this also saves me money on the amount of shipping. I use now EMS fast as they have never let me down. Even from Japan to the UK takes 4-5 days total. This time around, most of the parts were already in Wrbike warehouse so they all arrived in 5 days. I do love the way Webike package their orders. They take great care in packaging well and keeping everything separate and individually packed. if there is any space, they fill that with extra padding like bubble wrap and/or air pockets. This was the case on this order. Although the box these came in was relatively samll, they are kind of heavy for what they are. The last thing I wanted was for these to be moving around whilst in transit. Not with how Webike package items though, thumbs up for that one. The axle sliders arrived in perfect 100% condition as you would expect. ALl the manufacturing from Gilles is exceptional. They really do know how to make parts and make parts to the highest specifications and quality. They do not take much to fit them, simply a couple of bolts and away you go. If for any reason, these do see the tarmac, I know they are going to do their job as intended. Gilles, you are a superb brand and I am very pleased Webike stock your parts. Thank you Webike for the great service provided with this and all my other orders View detail
Fits: YAMAHA FZ-10, YAMAHA MT-10 SP, YAMAHA MT-10 SP, YAMAHA MT-10, YAMAHA MT-10, YAMAHA NIKEN GT, YAMAHA NIKEN, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA YZF-R1M, YAMAHA YZF-R1M, YAMAHA YZF-R6
Gilles Tooling rear axle sliders
Having already decided to purchase the front Gilles Tooling axle sliders, it was only right that I also purchase the rear axle sliders. I found the correct part from Gilles Tooling website. Then again, luckily, Webike also stock the rear axle sliders too. Brilliant. I could probably get these shipped direct from Gilles at around the same kind of price but then I woul have to hope they package their products accordingly. Ended up just getting averyhting from Webike. There were already the front axle sliders in my basket and a few other smaller bits and pieces. The shipping because of this was a lot better value than if I purchased just one or two products from Webike. I use nowadays, EMS fast. The service is spot on, everything is delivered in rapid time, when I say rapid, I mean from Japan to the UK in less than 5 days. All the parts in my order were neatly fitted into a smallish box which Webike took the liberty to seal on the outside. The inside was well packaged and these guys must be great at Tetris as they got eveything in the samll box without compromising the efficiency of the extra packing. They filled any gaps with bubble wrap and air pockets. When these arrived, you can just feel the quality. All the machining is perfect, no weird burrs or shards. The paint is flawless and you also get a couple of different coloured rings which should suit anyone's needs. Fitted really nicely and the overall result is a great looking bike with protection I know I can trust just in case. Very pleased with my purchases, thank you Webike View detail
Fits: KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R
Damper effect expected
Sliders with a single point of attachment are at risk of damaging the frame, but this product was selected because it has a built-in damper to dampen the impact.
It is hard to tell how effective it is because it has not been tipped over. It seems to be less stressful on the mounting area because it has little overhang for its thickness.
I like it because it is a shape that does not make much of a statement.
View detail