Reviews
The build and installation is top notch.
The product is well made. The price is a bit steep, but I am glad I installed this product. View detail
of high quality
I wanted a Silver footpeg but could not find one, so I went with this one.
Back volume may be low, but it is just enough for me in Touring Main.
I was able to install it myself, which I am not used to doing, but there are many things to check, so it is safer to ask for help if you are unsure.
The installation was perfect, as it is dedicated to the model of the car.
The delivery time is not that long, but it is not something that can be produced in large numbers, so there is no way around it.
I am glad that I can order only repair parts.
It is a good idea.
View detail
It is as good as I expected. It would have been better if the delivery date had been earlier.
I was concerned that the Left Side footpeg is offset slightly more to the outside than the Right Side, but I guess that can't be helped since the ROD has increased due to the reverse change support. View detail
Fits: KAWASAKI Ninja H2 SX SE, KAWASAKI Ninja H2 SX SE+, KAWASAKI Ninja H2 SX SE+
I chose it completely based on preference.
Before the installation, I was worried about a lot of things, but it turned out to be a blessing in disguise!
The position settled at 20mm BACK/30mm UP.
The price is higher, but I was excited because I liked the Titaniumium Bolt, which is available in a choice of colors!
View detail
Fits: KAWASAKI ZEPHYR750 [Zephyr]., KAWASAKI ZEPHYR750 [Zephyr].
Rear Sets
I just installed Rear Sets for my friend's Motorcycle. I bought the product I liked because every manufacturer has a long delivery time.
The fact that we are in the same city, Hiroshima, is also a reason for purchasing this product.
The others were installed without any problem and I am satisfied with the quality.
View detail
The texture is great.
The texture is great.
I'm glad I chose this over YOSHIMURA's Meter Bracket.
View detail
Fitting outstanding!
I purchased this product to install on my CB400FOUR.
・YOSHIMURA PRO-GRESS2Multi-temp meter
Fitting is unquestionably good for an exclusive product ◎
The texture is great and it fits Refreshing!
View detail
Used for YOSHIMURAPRO-GRESS2 installation
When I was searching for a good bracket to parenthesis when installing YOSHIMURAPRO-GRESS2, I found it and bought it.
Usage：Touring
Image of what I received:Good finish and good impression.
Installation difficulty:Beginner
Feel:Design and finish are both excellent.
Included Parts:All OK,
Disappointments:None
View detail
Woodstock mount
This alumymount for my Yoshimura gauge is perfect. Great quality. Awesome quality and super fast shipping. WeBike always has the best products. View detail
Fits: SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI KATANA
A beautifully finished product
When I took it out of the packaging and held it in my hand, I was struck by one word:beautiful.
Pre-assembled and very easy to install.
It was the first time to install the product, but felt that it was constructed for easy installation.
I bought it to prevent the footpeg from hitting my calf.
Driving has become very comfortable with very tightly compared to OEM.
It would also be nice to eliminate the tightness of the toes on the tip of the OEMfootpeg.
Above all, the Manufacturer was very responsive and very helpful in changing the ROD to the current MODEL.
Very Recommendation.
View detail
Zh2 rearset
Rearset fits my kawasaki zh2 2021. More comfortable on the riding position and alot of positioning for the foot peg. Highly recommended View detail
Fits: KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE KRT EDITION, KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja ZX-4RR KRT, KAWASAKI Ninja ZX-4RR 40th
Best footpeg
Standard step, purchase of a collapsible Pedal.
Accuracy, feeRing, cutting, and footpeg are all satisfactory.
I was disappointed when I installed one from another Manufacturer.
I found it wonderful.
View detail
Satisfied with high rigidity and operability
I replaced the OEM footpeg before I snapped it.
I wanted something with a solid heel plate, so this was perfect for me.
The rigidity and precision of the product was perfect, and there was no rattling whatsoever.
As for the operability, in the OEM state, it had the limp shift feeling characteristic of automatic shifter, but in the
The Shift Pedal bearing can be adjusted in three different positions for the Shift rod on the lower side.
You can change the lever ratio (adjust the amount of stroke when SHIFT UP/DOWN) to get a tighter shift operation feeling.
Thanks to this, GEAR is now ScauperScauper and I can shift change with confidence even before Corner.
There are five positions to choose from, and I found the 15mm Back/35mm Up position to be the most comfortable. I found the 15mm Back/35mm Up position to be the most comfortable for me, as it allows me to ride naturally and is very easy to control. I don't know if it's better or worse because I didn't compare it with other products.
I was able to experience the ease of operation that is fed back from road races such as the All Japan Championships.
A parts list is also enclosed, so in the event of a fall or injury, you can order repair parts from just one bolt.
View detail
Around a Simple Handlebar
I used it to replace my dTRACKER Normal meter with an acewell meter. acewell's MeterExclusive Design keeps both Well and Meter.
I was able to make a simple Handlebar area with Aluminum Cut-out and high quality Anodized.
View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE KRT EDITION
Red Top Bridge goes well with Red Frame.
It's pretty cool, and it's WoodStock, so it's very accurate.
There is no Instruction Manual, so it is difficult to remove the NORMAL setting...
Socket36mm required
To remove the NORMAL from the key cylinder, I drilled a hole in the bolt with a drill and removed the bolt with a hexagonal folding bolt without...
It's got a pretty RedScrew lock on it, so I'll have to heat it up with a SmallBurner.
The NORMAL Black Washer will be used again, so attach it to the WoodStock and fix it!
Torque is 80.
If you're a beginner like me or don't have the tools, don't do this...
View detail
Fits: KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE KRT EDITION, KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja ZX-4RR KRT, KAWASAKI Ninja ZX-4RR 40th
The accuracy of this Manufacturer is good
I like it, it was the Rear Sets I was looking for.
No rattling whatsoever, and the design is great!
I was worried about AllRed, but I bought Black.
I went with the high grip footpegs, but my normal clothes are going to hurt when I hit them... No, it is painful.
View detail
The process is beautiful.
The quality is excellent.
It is machined from 3°thick aluminum plate, and the chamfering is uniform.
What do you think of it when you pick it up? Beautiful! It was
The outer circumference of the plate is about 1? in size, which is intended to prevent the external force from being directly applied to the License Plate.
It's a bit of a shame that you can only see the lower emblem part of the device, but it's a beautiful part.
View detail
a top ranking on Meter Bracket
Install the meter by using the appropriate bracket
I think that's possible, and I don't want the resulting self-satisfaction to be something like this... I bought this one, which is a bit expensive for a meter bracket
As a result, I'm Large satisfied! That's really cool, isn't it?
A month and a half of delivery time, longer than I thought it would be, and I wasn't half as self-sufficient when it was completed as I was rushed through Yes
I'd like to see more of the various Meter brackets made like this
Men have a certain admiration for the "cockpit"
Look at the coolest meter around, you want to get a Tension up and ride a motorcycle! Is it?
In that sense, I think it was a worthwhile purchase
Every time I look around the Meter, I grin and then ride it
View detail
Very nice
Japan's high quality product with reasonable price. Fit on my GSXR1000R(L7 with abs) and able to use the original tail light. It can provide the obvious position adjustment with the reverse gear change. Very nice. View detail
ZX12R Exhaust Hanger
Beautiful and well made exhaust hanger for the ZX12R. Perfect fit. No instructions! The spacer in the kit is used under the bracket, rearmost bolt. Reuse OEM rubber bushings and bolt/nut to attach the muffler (Bushings, bolt/nut not included). Torque to OEM specs. View detail