Reviews
Purchased for installation of Kellerman Barrett Ato
[How is it used?
We put a Stainless Steel Gold fold and Spacer on the +Screw of the Switch box, and then attached a M5 10mm OD Pipe nut to the bottom of the box with an M5 ultra-low cap bolt, and then attached this Kellerman Universal Bracket.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
It is easy because all we had to do was loosen the screws, fix the bracket to the pipe nut, and tighten the screws. It was firmly fixed.
How was your experience with it?
I have not yet purchased and installed the Barrett Ato, so I can't make an overall judgment, but I am satisfied that I was able to secure the Bracket as shown in the Image. I would like to purchase Barrett Ato as soon as I have the budget and am ready to do so.
[Included Parts:were they on?
Nothing was missing regarding Included Parts:, such as M6Spacer or Screws.
[Was there anything that disappointed you?
I am dissatisfied with the price. I think it is a little too expensive, but it is an overseas Manufacture, so it can't be helped.
View detail
Fits: Others
Installed on a MONKEY125!
Installed on a MONKEY125!
Refreshing night visibility improvement and Rear area! ^_^
Since we had a hard time with our own Bracket and Wiring for installation, we recommend that you ask someone who is familiar with Custom to help you.
View detail
indicator
Blinker It's good. It is bright. And it's expensive. View detail
![[Optional] Bullet Atto/Rhombus S/Micro S Mounting Part Conversion Adaptor](https://img.webike-cdn.net/catalogue/images/120126/KM152-852N_TS.jpg)
Fits: Others RhombusS, Others Bullet Atto, Others microS
Does the job for me
I bought these to fit Kellerman Atto front blinkers and rear brake light on my JB03 Monkey 125 and they work a treat. I only wish these came inside the box of Attos. View detail
To make the Blinker less noticeable
From the moment you decide to buy a new Motorcycle, before you decide on a model.
I was thinking of installing this Blinker.
I wanted the lights to be as small or bright as possible.
I found this Blinker on Harley's Custom video and was told that it was vehicle inspection compliant.
Without hesitation, I decided to install it on my next Motorcycle.
The one attached to the Front is, of course, the one with Blinker function only.
The 2021 RnineT has a Blinker that is also LED.
The person in charge of the Dealer said it was a waste of time.
And where to install it.
Shall I put it on with Bracket on the Front fork?"
Shall I put it under Lever in Handlebar?"
I've wondered about a lot of things.
For now, we installed it in the safe location where the Blinker was originally located.
Lens color is [Color] I'm wearing Clear's.
In fact, if it also serves as a Blackout, Lens color is [Color] Smoke would have been better, though.
Lens color. [Color] I missed that there was also a Smoke one.
However, it is small enough that it is not noticeable at all, so I am fully satisfied.
Rear was also replaced, but Rear has a control light function.
It is a bit expensive, but satisfying enough.
View detail
![[ILASH] LED Turn Signal Conversion Kit](https://img.webike-cdn.net/catalogue/images/68108/KM123-512_01_TS.jpg)
Fits: HONDA CBR1000RR Fireblade, HONDA CRF1000L Africa Twin
Clean flowing Blinker
CBR1000RR (sc77) This is a must-see for those who have installed a sequential blinker on their
I tried various resistors and other things, but finally arrived at this product.
The Blinker now flows beautifully.
View detail
Even though it's extremely small, it's a blast of light. No wonder this is so popular.
The reason I purchased and installed the
? My Motorcycle (JC92 GROM) Tanax Side bag GT installed on
Bag's fit feeling is good, but it seems to be out of security standard because of the visibility from diagonally behind.
? We have to do something.
? to the existing RWIN ca. Expansion. So, if I install NumberMount Bracket's LEDWINCA, it will meet the safety standard.
? Okay, let's do it.
So I installed it.
I had a lot of trouble installing the product in question, but I am now able to return it to the Motorcycle and have added the Large variant.
Just…Considering that I'll eventually be carrying RCarrier and Top case, Bullet Atto DF (including all tail lights, brake lights and direction indicator lights) I think that it was perfect in the safety side if I had made it to
Well, I was able to bring it back to the present, so I have no complaints.
View detail
![[Option]Bullet Atto/RhombusS/microS Mounting Section Conversion Adaptor](https://global.webike-cdn.net/photo/impression/09/09fe83edd0ae703dc9b8a8909872acf7L.jpg)
Fits: Others microS, Others RhombusS, Others Bullet Atto
For compatibility with UniversalLicense Plate Holder.
I bought this to combine Bullet Atto with KIJIMA Bracket.
The joint surface is Ribbed to prevent slippage and is a good product.
View detail
I knew it, Kellerman.
It looks neat and the light level is fine. 。 There are various parts for installation, so you can put it anywhere you want. 。 I've become a high flasher, but I think I'll leave it as is for now... View detail
![Bullet Atto RB [Barrett Atto RB] World's Smallest Tail Light/Brake Light](https://global.webike-cdn.net/photo/impression/4d/4d755a10d3ce37516c662a2fd476ebe7L.jpg)
Fits: Others
dazzlingly bright
I was interested in it, so I bought it.
It's a good price for a single tablet, so I was rather worried.
I'm using KIJIMA's NanoSeries blinker.
As for the brightness, I think KIJIMA is a little brighter.
But at night, when a motorcycle with a Kellerman attached to it is waiting at a traffic light in front of you, you can't see it.
It's so bright that I don't like it.
When I installed the KIJIMA, I had a hard time because the wiring was too thin.
Kellerman had some thickness and didn't have any difficulty.
Where do you put it, in terms of size? It's like...
When you light it up, it makes a strong statement.
If you're wondering what kind of brightness you need, don't hesitate.
I hope you will purchase it.
View detail
Kellerman Blinker
Small and inconspicuous, it's good?
I think it's a lightly smug Blinker.
View detail
very good
My car is a FATBOY by Harley-Davidson, a 2019 model. I bought this for KELLERMANN microS turn signal. The design of the turn signal bracket is very reasonable, and there is no need to adjust the angle after installation. The workmanship is also very good, and it is very sturdy to use. ---------------------------------------------- My car is a Harley-Davidson FATBOY, 2019 model year. This is in order to buy KELLERMANN microS turn the lamp. This section flasher brackets design is very reasonable, after installation do not how to adjust the angle. Work is also very good, with them very strong . Powered by Google Translator View detail
Beautiful and practical
My car is a FATBOY by Harley-Davidson, a 2019 model. The front steering of the original factory was too big, and I didn't think it looked good, so I replaced this KELLERMANN, which is known as the smallest steering light in the world. After seeing the real thing, I found that it was really small. At first, I was a little worried about the brightness. After the installation, I found that there was no problem with the brightness, and it even felt brighter than the original factory. ---------------------------------------------- My car is a Harley-Davidson FATBOY, 2019 model year. The front steering and other original too, that does not look good, so he changed this KELLERMANN called the world's smallest turn signals. After seeing the kind found in very small indeed, there is the beginning a little worried about brightness, brightness after installation no problem was found, even brighter than the original feeling. Powered by Google Translator View detail
![[Optional] Bullet Atto/Rhombus S/Micro S Handlebar Mount Bracket](https://global.webike-cdn.net/images/reviews/697/00001013697L.jpg)
Fits: HARLEY-DAVIDSON
Cheap and practical
My car is a FATBOY by Harley-Davidson, a 2019 model. I bought this connecting piece for KELLERMANN, which is known as the smallest turn signal in the world, Bullet Atto. For beauty, spray it black first. It is necessary to adjust the angle during installation to achieve the best effect. ---------------------------------------------- My car is a Harley-Davidson FATBOY, 2019 model year. This sheet is connected to buy KELLERMANN called the world's smallest turn signal, Bullet Atto used. For aesthetics, first spray it became black. The installation of the required adjustment to the angle in order to achieve the best results. Powered by Google Translator View detail
A little pricey, but the world's smallest is very attractive
I chose Blinker because I wanted a product that would be compatible with vehicle inspection and would be as discreet as possible
I'm very satisfied with the presence of the normal (off) light because it's close to Zero and there is enough visibility when the light is on I am
You may need to be a little careful about the fact that they are sold by the unit of 1pc. and that Wiring is thin
(I don't think it will break if you work carefully.)
After purchasing this product, I got a slightly larger Blinker from KIJIMA (NanoSeries) is now available For your reference
View detail
Almost Blinker reply
The existence of Blinker is bothering me because I customized SR400 to the BMWR75 (WW2) style It was installed because it became
I asked the shop to install it, because they said the WiringCable is quite thin He said it was a little nerve-racking
When I had it installed, I couldn't see where it was attached at first glance, so I had to find out where to install it It was as Small as you can find
It's bright enough in the light Visibility is definitely better than the oddly thin Blinker, and it's not a problem at night or even in backlighting in the daytime It shines just right
If you don't want to stand out from the Old Style or Blinker, I definitely recommend it The rest of the time I'm worried about how long they'll last, because the price of one is so high, and the expense when it breaks is a little tight I felt it, but I definitely recommend it if you want to make it Refreshing
View detail
At first glance, it looks like a blinker reply, but will it pass inspection?
important item
[Was there anything that disappointed you?
No, not really, but I'd have to say the price
A little cheaper
However, if it's cheap, people will put it on (laughs)
Do you have any wishes or improvements you would like to make for the Manufacturer?
Japanese Vehicle Inspection Correspondence It comes with paper, but it would be helpful to have a sturdy one that you can put in your Wallet like a card
[Do you have any products to compare it to?
I had a problem with the Sequential Blinker from DAYTONA
The one and only Small Japanese Vehicle Inspection Correspondence has been given the nod
How was your experience with it?
When it's not shining, it's definitely not noticeable in size, but when it glows, it's quite bright and has a lot of light Even in the daytime, you can ride with a great presence and peace of mind
As for the vehicle inspection, I showed the DMV the paperwork that came with it and it went through perfectly
Was the installation difficult?
The small size makes it easy to put it anywhere
[Overall Rating]
Even in the daytime, the visibility is excellent, and you can actually go through the inspection at the DMV with the attached documents Large Satisfied
View detail
Unique Size Feeling
Small fingertip-sized Japanese vehicle Inspection Correspondence is bright enough to surprise you 。 But Wiring didn't say which one is Plus and which one is Minus, which is a shame View detail
inconspicuous
I was looking for an inconspicuous blinker that would pass inspection and would not be noticeable, so I bought this one I bought it in conjunction with the Harley Bracket for HARLEY, which is very small, but I had the Bracket made as it was not available I haven't passed the car through inspection yet, but when I looked at the ManufacturerHPetc It looks strong View detail