Reviews
Replaced by preventive maintenance
We purchased Wheel used and used it for one year.
Damper replacement was performed as preventive maintenance since it was time to replace Tire and Sprocket.
We will charge a labor fee for the work!
The acceleration was firm during acceleration. I'm not sure if there was any discomfort or Time lag...
View detail
Clutch becomes lighter
I installed it on New Model GSX1300R HAYABUSA.
In fact, this time we are replacing VRD, also by GALE SPEED. replacing VRD to VRC from higher MODEL to Standard model may sound strange, but there are actually various reasons.
First of all, I was attracted to this VRC the moment I received it and opened the box. It looks like a work of art indeed, and just looking at it raised my Tension and made me feel that it was worth the high price.
I think it beats bremboRCS just for the smooth surface treatment. To be honest, I don't understand why brembo's RCS is so popular. I used to be a brembo RCS fan, and I used to think that no matter what kind of motorcycle I switched to, I would first replace it with brembo's RCSMASTER.
However, I felt the quality of brembo's forging was not worth the price. I was tired of that, so I chose GALE SPEED's Vine VRC this time.
Back to the story, I first went for the VRE feel and went for the bright black VRD for Cost considerations, but I quickly gave it up and went with this VRC because it looks like RCS and I felt something was wrong with it. I am usually a Touring Maine, so I can't tell the difference between VRD and VRC! Still, I chose it because of the way it looked. If that's what you enjoy, then that's fine.
Finally, after installing it and running it for a bit, it feels very good - lighter than the OEMClutch, and a little bit better at 17.5mm.
※※※※ Note ※※※※
New Model GSX1300R HAYABUSA will change the clutch master, [Hill HoldControlSystem will not be available.
The reason is that with the OEM clutch switch, if the clutch is released for a moment, the switch returns, the ECU recognizes that the car is starting, and the rear brake is released. However, with the external clutch master, the switch remains pressed until all the clutch is released, so the car is not detected as starting, the rear brake remains on, and even if the Axel is turned, the car does not move forward! This is very dangerous. I would like to see any Manufacturer solve this!
↑ It may be a little confusing, but try it yourself, it will never start!
In my case, I have turned that function off.
View detail
I'm glad I went with VRC.
I purchased this VRC when I replaced my GSX1300R HAYABUSA with a MASTER. In fact, this time, it is a replacement from VRD, also by GALE SPEED. replacing VRD to VRC from higher MODEL to Standard model may sound strange, but there are actually various reasons.
First of all, I was attracted to this VRC the moment I received it and opened the box. It looks like a work of art indeed, and just looking at it raised my Tension and made me feel that it was worth the high price.
I think it beats bremboRCS just for the smooth surface treatment. To be honest, I don't understand why brembo's RCS is so popular. I used to be a brembo RCS fan, and I used to think that no matter what kind of motorcycle I switched to, I would first replace it with brembo's RCSMASTER.
However, I felt the quality of brembo's forging was not worth the price. I was tired of that, so I chose GALE SPEED's Vine VRC this time.
Back to the story, I first went for the VRE feel and went for the bright black VRD for Cost considerations, but I quickly gave it up and went with this VRC because it looks like RCS and I felt something was wrong with it. I am usually a Touring Maine, so I can't tell the difference between VRD and VRC! Still, I had to choose based on looks.
Finally, after installing it and running it for a bit, it feels very good, I feel the VRC is sufficient, I don't really need VRD or VRE except for Race.
We recommend this VRC over RCS! You will never regret it!
View detail
be extremely thorough, focusing on even the finest of details
Tank can be oriented 360 degrees to any desired angle. View detail
perfect quality
The Gale Speed Clutch has perfect quality and performance. After installing this, you can drive more comfortably than before with a lighter clutch feeling than usual. View detail
Installed on New Model GSX1300R HAYABUSA
[How is it used?
First installed on a 2023 GSX1300R HAYABUSA!
The OEM MASTER was too big, tacky, and too hard to grip, so we replaced it with this one.
I have always used BREMBO, but the moment I saw this VRD for the first time, I was attracted by the beauty of the forging and Quantity of this product!:Pair (for Left and Right) Both were purchased.
Even though I have always been a brembo guy, I tried GALE SPEED for a while and it was surprisingly good!
Was the one you received as per Image?
The box is yucky and full of luxury.
A little more expensive than a brembo box? The feeling that the box was a bit more expensive than brembo's box was already conveyed to us before we opened it.
So the first impression is the best!
Was the installation difficult?
It was a bit complicated to install on the GSX1300R HAYABUSA.
If you want to use OEMHose as is [30MM]. I need an extended Banjo adapter. That would save me from having to buy an OEMHose. Nice savings!
How was your experience with it?
While the OEMMASTER is 19mm, we chose this 17.5mm.
The reason is that the OEM Caliper Piston is 30mm*P4, so 17.5mm is the most suitable size. 19mm is fine, but the grip is not so comfortable and hard, so 17.5mm is better. Please choose this size for your GSX1300R HAYABUSAOwner.
[Included Parts:were they on?
Stickers, Instruction Manuals, etc. I don't want to put Stickers because, frankly speaking, they are too flashy. I don't want to put Stickers because they are too flashy, to be frank.
[Was there anything that disappointed you?
Not particularly, I guess. Just expensive, from my friend's point of view, it's like lower than brembo:.... But this one is higher up!
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It would be great if it came with a Switch.
View detail
high rigidity
[How is it used?
100%Circuit running
Was the one you received as per Image?
I chose Silver, so the texture is higher than I expected, in a good way.
Was the installation difficult?
The Shift Side is simply replaced, but the Brake Side requires some adjustment.
How was your experience with it?
It is a latecomer to the footpeg brand, but it is made very seriously. It is also highly accurate.
[Included Parts:were they on?
It comes with everything you need.
[Was there anything that disappointed you?
(after the -te form of a verb) not ..
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
The instruction manual is simple, but the exploded view is well illustrated, so the installation can be done without any confusion.
View detail
Wow!
More than impressed, these wheels are perfect, in every way. Almost too good for a roadbike, but absolutely made up I bought them. Very happy. View detail
I used it for VRD.
[How is it used?
I purchased this along with the VRD.
You can't use this without it, can you? Necessities
I don't need another Race car.
Was the one you received as per Image?
It's just as I imagined.
It is packaged in a small but solid box.
That's what GALE SPEED is all about. Even the cheapest items are well packaged and quality is important to me.
Was the installation difficult?
Bolt1 pc so it was not particularly difficult.
Wiring requires a little ingenuity, but it can be done if you have the time.
How was your experience with it?
As you can imagine, it responds normally.
[Included Parts:were they on?
The instruction manual is attached, but it is easy to understand even if you do not read it.
[Was there anything that disappointed you?
Nothing in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I have to buy it because it is a necessary item. The price is reasonable, so I think it's okay.
View detail
I went with this one because it's a two-point fastener.
[How is it used?
I installed it on New Model GSX1300R HAYABUSA.
The OEM was too big and tacky, so we replaced it with this one.
I've always been a BREMBO guy, so I've used both RCS and RCSCORSA Corta, and the performance is good, but the texture feel is not so good. you have to use BREMBO CNC to get the cut-out texture. This is why I became interested in GALE SPEED's.
The VRC and VRE both have a very clean cut-out feel, which alone wins over brembo. I don't like VRC because of the one point clamp and the Mirror Holder, so I went with the New Model VRD. Unless you run a Circuit, I think VRD is sufficient. But the surface treatment like skin texture is not as good as VRC.
Was the one you received as per Image?
It is very luxurious.
Present is also good.
The brembo box has become something that can't be compared.
Was the installation difficult?
It's not difficult if you have the skills, but if you want to install it on a GSX1300R HAYABUSA, you may need an extended VERSIONBolt.
How was your experience with it?
I haven't installed it yet, but it definitely feels better than brembo.
[Included Parts:were they on?
Sticker and Instruction Manual?
Switch must be purchased separately. (I really wish they would put it on lol)
[Was there anything that disappointed you?
Nothing in particular, but if I had to say, I would like a Switch to be attached.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Total gold price is a bit high due to separate purchase of Reserver tank, etc.
View detail
GALE SPEED Rear Sprocket
We purchased this product to change from 525 to 520.
In fact, I have only done street driving yet….
I am a little off topic, but I just wanted to let you know that Webig was very prompt in his response to my request and that I received the shipment and the product very quickly.
I am surprised.
I have purchased several items recently and would love to continue to do business with this company.
Thank you very much
Thank you for your continued support.
View detail
Things that deteriorate without notice….
Although this is somewhat easier to understand than OEMWheels because of their shorter lifespan, they still deteriorate slowly.
When I taste the new condition for the first time in several years, I realize how easy Motorcycle was to ride.
View detail
Best sprocket on the market
I LOVE this sprocket. I have been using them for years. Not only do they look sweet they are one of the strongest on the market if not the best. They last literally forever. I probably put 250 hours on one.They almost never wear out. won't even entertain the idea of using anything else. They look cool, very unique. You can spot them anywhere. Of course, they are more expensive than your average sprocket, but they will outlast them many times over, offsetting the extra purchase price. Great Product, Highly Recommend,webike too fast shipping. View detail
Good Very good
Very good Very good Very good Very good Very good Very good Very good Very good Very good Very good Very good Very good Very good Very good View detail
Superior Piece of Kit form a Highly Respected Brand
The GALE SPEED Elaborate Wire Clutch Holder Kit is one if not the best lcuth kits on the market today. Huge kudos to Gale Speed and let's not forget the fantastic logistics of dealing with Webike. Always a pleasure doing business with Webike. View detail
Very Very good
Very good Very good Very good Very good Very good Very good View detail
Excellent Craftsmanship! Highly Recommended.
I ordered the GaleSpeed Elaborate Wire Clutch Holder Kit WCE30BK and all I have to say is that I am blown away by the superb attention to detail and craftsmanship that went into making this product. The CNC machine work and finishing is fantastic. It is a bit on the pricey side, but, cry once buy once is what I say when it comes to making purchases of products of this quality. I'll definitely be purchasing additional Wire Clutch holder kits for my other motorcycles. View detail
Fits: YAMAHA TRACER900, YAMAHA YZF-R7, YAMAHA MT-09, YAMAHA TRACER900GT
Satisfaction for the price
I waited 2 months for the Rear and 4 months for the Front, and since I replaced the Tire without changing it, I think I was able to experience the change in the Wheel only.
First of all, it is obviously lighter to fall down. CoodeQuantity:1 Set of 3-items is also the effect of changing the 3-items, but it really turns just by looking at it.
The freedom of Line during Cornering has been increased, and it is now really fun to raise, lower, and further bend the Line.
I was worried that it might be unstable while giving a sense of lightness, but I can't perceive any negative aspects. It's just the price.
I was quite worried about the purchase, but as a result, I am satisfied with Large. I have been using a lot of aftermarket parts for the suspension, and the synergistic effect is that the other parts seem to be working well too.
The U-shaped cross-section of the spoke makes it difficult to clean the dust.
View detail
Attracted by the appearance, it was installed!
I was attracted by the look of the product as per the Title.
The vehicle model is ZEPHYR750.
I installed a black Gale MASTER to match Striker's Rear Sets, but the hose to the Reserve tank looked depressing, so I installed the said Aluminum Tank!
The area around the rear master is now refreshed and looks tighter.
However, the high price and low practicality (other than appearance) of the Aluminum Cut-out makes it a poor cosmetic choice.
View detail
Order until received
It does take a bit of work on the website to find the correct part you need. Because, among other things, the search terms are probably very narrow and there is no selection. Afterwards, the ordering process, like the information you receive when the part is shipped, is very proven and everything works perfectly until delivery. I would order accessories for my motorcycle from WEBIKE again at any time because I am extremely satisfied. Like the product you received, it not only looks high quality on the website but also when you receive it, I have never received such a high quality brake switch. Otto ------------------------------------------------- --------- It is a bit elaborate on the web page until men found the correct part that you need. Since among other things, the search guides are supposedly very narrow and there is no choice. Then, however, the ordering process is how the information you get when the part is refined very provenly and until with delivery everything works perfectly. I would order accessories for my motorcycle again at any time because I am super satisfied. Like the product obtained, not only looks high quality on the web page, even if you have received it, a high-quality brake switches have never received. Otto Powered by Google Translator View detail