Reviews
Fits: SYM MMBCU, YAMAHA X-FORCE, YAMAHA FORCE 2.0, SYM DRG
Front Fender feels longer and is replaced.
The product feels less durable than OEM.
Just the right length of Fender that I was interested in.
Self-satisfaction
View detail
Fits: YAMAHA CYGNUS GRYPHUS, YAMAHA CYGNUS GRYPHUS, YAMAHA CYGNUS GRYPHUS, YAMAHA NMAX125, YAMAHA NMAX155, YAMAHA X FORCE, YAMAHA FORCE2.0
Somehow.
It's just a replacement, because I can replace it with 3 Screws. View detail
Gold ♪ from the photo ♪
I think it is difficult to replace the bolt on the OEM footpeg with a half-assed tool because the locking agent is effective when removing the bolt from the OEM footpeg. I think it is difficult to replace the footpeg. View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA cub, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA cub
Pimp to LITTLE CUB (carburetor)
[How is it used?
Normal kick is dirty and needs to be replaced
Was the one you received as per Image?
Plating is thicker and looks better than the photo.
Was the installation difficult?
Just a normal exchange.
How was your experience with it?
I was worried about interference with the Exhaust System, but there is enough room for a Large
I'm using WirusWin's RODExhaust System, but NORMAL would work too.
[Included Parts:were they on?
Screw for fixing
[Was there anything that disappointed you?
I'm a little concerned about it hitting the Side coverretc. because it falls too far inward when it's tipped over.
I have no complaints about this level of quality for a few hundred yen more than the OEM compatible product.
View detail
Fits: YAMAHA VINO125, YAMAHA VINO125, YAMAHA BWS125(BWS), YAMAHA BWS125(BWS)
Good cost performance, durability, and quality
The 6 pieces are under 1000 yen, but the pieces under 13g are finely lineuped in 0.5g increments, with little variation in weight, and the Edge is rounded and carefully finished.
Also, although the durability is not specifically claimed, it is good with almost no wear even after 10,000 km of driving, with only the Light tune level of the drive system and some Engine tinkering.
View detail
Psycho ー
It was good. I would definitely recommend! View detail
Fits: YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA CYGNUS X, YAMAHA CYGNUS X FI
Finally installed ^^;.
I bought it a long time ago and finally had time to install it.
I don't have to tell you that KOSO is the only one who made it outclassing ^^.
Thanks to the new small Axel opening, the burden on the wrist is reduced and the rider will not get tired even after riding for a long time ^^.
The Gauge that indicates the Axel opening degree also doubles the satisfaction.
As usual, it may be a little expensive, but it's worth buying.
View detail
Fits: YAMAHA BW'S125, YAMAHA BW'S X, YAMAHA BW'S R, YAMAHA BW'S 125, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X
It was almost almost Bolt On.
It is a convincing creation, as one would expect from KOSO.
The connection surface with the Cylinder is not distorted at all, and the Injector slot is also very precise, neither loose nor tight, just fit (although it takes a little bit of hang to insert it because it is too just fit).
The only thing that needed to be done was the processing of the OEMBracket shown in the photo, as per Title. Almost Almost." It was Bolt On.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA SMAX[1DK], YAMAHA FORCE155[BH9]
Cool!
Installation is easy and cool.
Minus was slightly distorted.
No problem once installed.
View detail
Fits: YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
Changed from Red to Black
[How is it used?
The same product in Red was used, but due to the increase in mileage and the change in body colorImage, it was changed to Black.
Was the one you received as per Image?
The bolt has been changed from this product's Included Parts:to Posipolini's M5 Bolt, and the black-colored Filter Frame has been changed to give the image a sense of massiveness.
Black suits Monotone's body color.
Was the installation difficult?
I have been using the bare spec. without OEMAir cleaner cover for some time, so I can replace it with Bolt On.
Since the Bolt on the Left is deep, there is a hole for maintenance on the Cowl, and if the Cap is removed, it is easier to turn the hexagon.
I leave the Cap off because of how often I change it due to weather.
How was your experience with it?
We have been using this product for some time, and when we use a new product immediately after replacement, we feel good about the Response.
It also goes well with the BEAMS R-EVOFull Exhaust System.
The intake sound is pleasant.
We are currently using the higher density Filter of the two Filters.
Since a low-density filter can be replaced by disassembling the filter frame, a new low-density filter will be attached to the removed Red, and the Red will be reused in a form that can be changed depending on the situation.
The filter I used does not have any tears etc., so I think I can reuse it by washing it.
[Included Parts:were they on?
Includes six M5×40mmBolt.
The length is long enough to accommodate the thickness of the OEMCover.
I have changed to Posipolini and am not using it.
The Instruction Manual describes the PowerCheckCurve, and the changes in usage are clearly visible in the Graph.
[Was there anything that disappointed you?
Not to disappoint, but there used to be an inexpensive product that was for sale, without Filter Frame and with only 2 Filters, but now this Quantity:There is only Set.
It would be great if you could resell it since it is a consumable item.
View detail
Change of Mood.
The exchange was smooth and simple. The color is black, unobtrusive and simple, and the Rubber Packing (Nut blindfold) is also included.
It's good
View detail
Small but easy to see and use!
Since it is a SPMODEL, it is not equipped with any convenient functions such as a clock, and since the crank is heavy, the cell will not turn even if the voltage drops a little, so it was installed for voltage monitoring.
【good point】
Anyway, the body is small, so there is no need to worry about the mounting position.
Back light is bright enough to see well in the Tunnel.
The temperature has little use, but the clock and voltmeter are essential.
[Trouble.
In order to make the power supply extraction SMART, we extended the electric Cable to the Battery installation area by ourselves.
IgnitionON is connected to the Wiring of the ETC, and Always ON is directly connected to the Battery+ terminal.
[Still unclear].
I don't know what happens when it hits the rain.
View detail
Small but easy to see and use!
Since it is a SPMODEL, it is not equipped with any convenient functions such as a clock, and since the crank is heavy, the cell will not turn even if the voltage drops a little, so it was installed for voltage monitoring.
【good point】
Anyway, the body is small, so there is no need to worry about the mounting position.
Back light is bright enough to see well in the Tunnel.
The temperature has little use, but the clock and voltmeter are essential.
[Trouble.
In order to make the power supply extraction SMART, we extended the electric Cable to the Battery installation area by ourselves.
IgnitionON is connected to the Wiring of the ETC, and Always ON is directly connected to the Battery+ terminal.
[Still unclear].
I don't know what happens when it hits the rain.
View detail
Attachment was installed using a separate Attachment.
It is attached using Attachment between RadiatorUpperHose.
There are similar products other than KOSO, and the font style of the numbers is difficult to read in the similar products.
The image is KOSO OEM Product.
OEM Product is in short supply, but we had it in stock here, so we purchased it as a spare.
View detail
Fits: Others Universal
Used for carburetor diversion
Used to divert CBR150R OEM Carburetor to MAJESTY125.
If the Accelerator WireBracket is cut 20mm and welded, the carburetor can be diverted by pimping.
I bought this one because I wanted to have a Choke Lever around the Handlebar since I can convert it to ManualChalk.
The OEMcarburetor for CBR150R was a don fit since the PWKetc. and Chalk standards are the same.
It is also 1500mm long, so it can reach Handlebar.
However, if you are making a Bar handle, etc., we recommend that you install it as close to the Handlebar Post as possible.
View detail
It will be Ka Chica Chi.
IC Blinker Relay but it makes a chica chica chica sound
The price for the sound is Large Variant Reasonable!
View detail
For those who have trouble driving at high speeds ...
I bought it because the maximum speed is a heady 114km and I was wondering if it could be a little more.
Spring replacement was a hassle, so I kept the OEM Clutch Side and replaced only the Pulley Side, which gave me 120km on level ground and +10km if I tried hard. (*Speed based on Meter reading)
The OEM weight roller may have been worn out, but the mid-range acceleration is no longer sluggish, and the car feels as if it turns from bottom to top without any stress.
I was expecting a drop in fuel economy, but I am very happy with the overall results, as I am getting about the same mileage when I commute to work as I did before the replacement.
View detail
Easy to see and Parenthesis good
Installation was not difficult, and the Instruction Manual was included. However, I would like to use another quantity of Washer to tighten it securely.:I think I need 1 Set, it's easier to read than OEM and Parenthesis is better! View detail
Fits: SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125 LIMITED, SUZUKI ADDRESSV125 G, SUZUKI ADDRESSV125
Excellent cooling bell for clutch
About quality and texture
The clutch drum is made excellently, it is stamped steel, which has several advantages over the stock drum - improved cooling and reduced weight, which greatly helps with acceleration without losing dynamics due to spinning up excess weight + an increased number of high-quality starts from a standstill due to reduced clutch heating
About the feeling of use
After installation, the quality of clutch cooling has noticeably increased, it stops “floating” after 5-6 sharp starts from a standstill, now it can withstand about 8-9, which is a worthy increase, considering that the scooter is not a racing scooter
However, for transmission tuning this component is necessary
Products to buy together
There is no need to purchase anything with this product.
Difficulty of installation
Easy installation instead of the original drum, just unscrew 1 nut and replace the drum
Cost performance and comparison with other products
Low cost and complete monopoly, as for the Address 125 there are no other similar transmission tuning parts
About shipping and packaging
Good packaging in a blister plus webike packaging in the box itself, the product was not damaged upon delivery
Any concerns, cautions, or advice when purchasing
Consider the compatibility of spare parts with your equipment, otherwise the use of this spare part is very simple ------------------------------------ ---------------------- About Quality and Texture The clutch drum is made excellently, it is stamped steel, which has several advantages at once in front of the stock drum - improved cooling and reduced weight, which helps well when accelerating, without losing the dynamics of unnecessary weight + increased amount of high -quality starts from the place by reducing the clutch heating ABOUT THE FEELING OF USE After the installation, the cooler of clutch cooling has grown markedly, it ceases to “swim” after 5-6 sharp starts from the place, now it is able to withstand about 8-9, which is a worthy increase, given that the scooter is not racing However, for tuning the transmission , this component is necessary Products to Buy Together Together with this product, it is not required to buy anything Difficulty of Installation Easy installation instead of the original drum, just unscrew 1 nut and replace the drum COST Performance and Comparison with Other Products Low cost and full monopoly, TC for Address 125 there are no more similar parts of transmission tuning ABOUT SHIPPing and PACKAGING Good packaging in a blister plus Webike packaging in the box itself, the goods are not damaged during delivery Any Concerns, Countions, or Advice When Purchasing Consider the compatibility of spare parts with your technique, the rest of the use of this spare part is very simple Powered by Google Translator
View detail
I've got something. can be seen and understood
[How is it used?
Double-sided tape for Emon's exterior is attached to the back of the headlight (PROTEC LB7W-H LED Headlight Valve).
Wiring is taken from:Fuse power supply, as I recall.
Period:September 9, 2018 to September 10, 2023 to date.
Distance : 68,197 - 26,169 = about 42,028 km
Was the one you received as per Image?
As per Image
Was the installation difficult?
The USB power supply was connected in the form of an addition to the place where the USB power supply had originally been added, so I think that there was little difficulty.
How was your experience with it?
*I do not have any equipment to measure voltage, so I have no idea about its accuracy.
Easy to see and read.
In the case of the last number 5, in particular, I remember that I felt a sense of discomfort even before the Engine completely stopped working. Especially in the case of the last number (5), I remember that I felt a sense of discomfort even before the Engine completely stopped operating, so I feel that if the values are not the usual ones, it will lead to early detection of abnormalities.
When connected to USB power supply
2. when using Grip heater
3. when cooling fan is in operation
4. When Cell Motor is in operation
5. when the Generator was completely black
The voltage of the battery is always in view, which is one of the reasons why we decided to replace the battery.
The engine is not benefited by the running wind, and the exhaust heat of the engine and the heat of the headlight are tormenting it, but I have not encountered any failure like failure yet.
[Included Parts:were they on?
I don't remember.
[Was there anything that disappointed you?
N/A
To be able to display information about electricity that is not visible to the eye, I've got something. I thought that Merit was a strong choice as a way to realize the "Merit". As a start to notice the "Merit", I thought Merit was strong because it is not expensive, and as the product name suggests, it is thin and compact, so it can be installed anywhere you want.
View detail