Reviews
BRC BRC Fuel Cock
Gasoline capacity was low, so I switched to Reserve and it started leaking.
Is it the life of the O-ring?
It's a 1994, so it's a no-brainer... I'm relieved to replace it... ♪
View detail
Fits: KAWASAKI Z400FX/Z400J, KAWASAKI Z400GP, KAWASAKI GPz400F/F2, KAWASAKI Z400GP, KAWASAKI GPz400F/F2
good-looking
I like the texture.
Nut was also replaced along with sporoke konkan.
View detail
Emblem
It was an easy job, as there was no modification to be done, just remove and attach the Screws! View detail
Kawasaki Zephyr 400/550 dress up badge. A MUST HAVE
fantastic dress up part for the kawasaki zephyr 400/550cc. my bike now looks complete with this badge and the build quality is amazing. if i could give it 6 stars i would. View detail
Fits: その他 Universal, その他 Universal
The length is good and ideal for Tappet adjustment!
I wanted to adjust Tappet and could not find Thickness Gauge, so I had to buy a new one!
I was looking for something as long as possible and easy to use with a small number of sheets, and I found what I was looking for!
Even in narrow and hard-to-access places, it makes the most of its length and bend to make a quick and easy decision!
My favorite
View detail
Fits: KAWASAKI Z400FX/Z400J, KAWASAKI Z400FX/Z400J, KAWASAKI Z400FX/Z400J, KAWASAKI Z400FX/Z400J
Necessities
Valve clearance needed to be replaced when adjusting, but delivery time was fast and helpful! View detail
Fits: KAWASAKI Z400FX/Z400J, KAWASAKI Z400FX/Z400J, KAWASAKI Z550, KAWASAKI Z550, KAWASAKI Z400FX/Z400J
For Sprocket
Nut so there's nothing special to write about.
The product was satisfactory with no Wound.
View detail
PASSOLRepair item
Nowadays it is very difficult to procure parts for old Motorcycle,
It was great to be able to purchase OEM Parts right away!
View detail
Fits: HONDA Super HAWK250, HONDA Hawk II CB400T, HONDA Hawk III CB400N, HONDA Super Hawk III CB400D, HONDA Hawk CB250T, HONDA Hawk CB250N, HONDA Super Hawk III CB400D, HONDA Hawk CB250T, HONDA Hawk CB250N
BRC BRC Government Fuse OEM Type
Thank you for the quick response. View detail
Fits: HONDA CBR400F, HONDA CBX400F, HONDA CBR400F, HONDA CBR400F
BRC BRC Main Board Fuse (OEM Type)
It is, after all, an OEM product, and although it is reliable, it is relatively expensive compared to other Fuse products. View detail
Fits: KAWASAKI Z400FX, KAWASAKI Z2, KAWASAKI Z550FX, KAWASAKI Z500, KAWASAKI Z550, KAWASAKI Z400J, KAWASAKI Z1
Let's replace it as soon as possible!
Oil leakage from the Tachometer wire outlet was getting worse, so we took the heavy responsibility of replacing it.
Quantities for double O-RingSpec. of countermeasures:Set product.
Oil leakage here is like a chronic disease of the old Z series, so I hope that this part will be released for a long time.
But a little expensive, I guess,
It is quite difficult to remove the hardened and deteriorated tubular seal.
Don't worry about it falling apart, just do your best to get it off.
You will see a reinforcing loop of Gold at the end of the collapse. Grab it and pull it out with all your might.
Apply silicon grease or engine oil before inserting the seal. If the seal is too tight and you can't get it all the way in, change to a large seal.
To avoid difficulties like mine, I recommend replacing them as soon as possible after they start leaking.
View detail
Fits: KAWASAKI Z400FX/Z400J
Mounted on Kawasaki KZ1000 MK-II
Spring for fixing Rear Brake Pads of KZ1000 MK2.
Kawasaki's OEM Product has also been discontinued.
BRCSpring can be diverted.
View detail
XJ400
I could have chosen OEM Parts or Other Brand Product, but I chose the less expensive one. View detail
That's what I wanted!
There it is, just what I was looking for!
I was also able to attach it to the KITACO Mirror.
View detail
cheap
It's very different with it. Good to look at.
But if you bend it too far, it will crack. Even if it cracks, you don't have to move the root of Mirror and you can just push it in so that you can't see it. Or rather, it is the price which is good if it replaces it.
View detail
For the first time in 24 years Overhaul.
I am very happy with the Overhaul with OEM parts. View detail
Fits: その他 Universal, その他 Universal
Fewer sheets, easier to use
I bought this because I had been using Thickness Gauge which has about 30 sheets and it was sometimes difficult to work with.
This one has only 9 sheets and the Body is thin.
Isn't this enough for a large Motorcycle?
View detail
Fits: HONDA CB400 Fore (air-cooled)
Fuel Tank Mounting Rubber
The rubber parts are consumable parts, so I hope you can keep stable supply. View detail
Fits: HONDA CB350, HONDA CB400 Fore (air-cooled)
Material:Stainless SteelCaliper piston
Haven't installed it yet, but it's got great texture! View detail
OEMGrip is the best?
After all, it's OEM that gets you there in the end. The best! View detail