Reviews
Fits: DUCATI SUPERSPORT 950, DUCATI SUPERSPORT 950 S, DUCATI SUPERSPORT 936, DUCATI SUPERSPORT 936 S, DUCATI MONSTER 821, DUCATI MONSTER 1200S, DUCATI MONSTER 1200R, DUCATI MONSTER 1200
It's a humble CustomPoint, but
It's a simple CustomPoint, but it makes me happy to see the difference when I'm driving.
Also, when you change the dirty Bolt, the body itself looks cleaner.
View detail
Fits: YAMAHA YZF-R1, DUCATI MONSTER 821, DUCATI STREETFIGHTER, DUCATI Multistrada 950, DUCATI Multistrada 1200S Touring, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200S Granturismo, DUCATI MONSTER1100EVO, DUCATI MONSTER 797, DUCATI MONSTER 1200S, DUCATI MONSTER 1200R, DUCATI MONSTER 1200, DUCATI HYPERMOTARD796, DUCATI 959Panigale, DUCATI HYPERMOTARD1100EVO SP, DUCATI 848EVO, DUCATI 848, DUCATI 1299Panigale, DUCATI 1299 Panigale S, DUCATI 1199Panigale S/Tricolore
CNC Racing GP DuctFront brakeCooling system
Installation will be compulsory in the WSB World SUPER BIKE Championship from 2022.
CarbonBrakeDuct was the best.
Even with a Harley for Touring, I just put it on the Rear.
They say the difference in temperature is more than 10 degrees Celsius.
When this is at Racing level, it has a very large effect.
https://ameblo.jp/keikocookingchicken/entry-12678352556.html
View detail
tales of one's travels
Because it was hard to hang the foot somehow when it was Side StandPin of NORMAL
I bought it after seeing that GizaGiza.
The replacement is just a matter of loosening and tightening, so it was quick and easy!
It doesn't slide around as much as it looks, so raising and lowering the STAND is a breeze.
However, because I chose Black, I sometimes lose sight of the Stand Pin in the shade with Smoke Shield! 。 Lol
View detail
Fits: DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4
To StFire. [Color] ClearClutch cover
It was not difficult to replace the original Crankcase.
There are about 17 mounting screws.
It is a Crankcase for Panigale, so just look at the manual and tighten the screws according to the order.
After that, the OEM liquid packing has to be installed before it cures.
I used the anaerobic liquid Gasket.
View detail
![FrameCrashProtection[Frame crash protections]](https://global.webike-cdn.net/photo/impression/95/9571e003282498cfc7cf45438322f7a7L.jpg)
Fits: DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER V4 S
One point aluminum parts are good Parenthesis.
I bought the Duralgon Slider because of the One Point Aluminum AnodizedParts on the base of the Duralgon Slider, which is not often seen on other companies' Sliders. I like it very much. The installation is swapped with Engine Mounting bolts, so I think it is easy for anyone who takes care of the torque management. View detail
Fits: DUCATI MONSTER 821, DUCATI MONSTER 797, DUCATI MONSTER 797, DUCATI MONSTER 1200S, DUCATI MONSTER 1200S, DUCATI MONSTER 1200R, DUCATI MONSTER 1200, DUCATI MONSTER 1200, DUCATI HYPERSTRADA, DUCATI HYPERSTRADA, DUCATI HYPERSTRADA, DUCATI HYPERSTRADA, DUCATI HYPERMOTARD939, DUCATI HYPERMOTARD939, DUCATI HYPERMOTARD939, DUCATI HYPERMOTARD939, DUCATI HYPERMOTARD821, DUCATI HYPERMOTARD821, DUCATI HYPERMOTARD821, DUCATI HYPERMOTARD821
It's more noticeable than you think.
I bought it as a for Passenger.
Installation is the same as the other footpegs.
It is a little bit heavier than other footpegs because of the toughness.
Touring with a friend, I was told by a friend who was running behind me that I stood out quite a bit.
The design is unique and I like it.
View detail
Fits: DUCATI DESERTX 937, DUCATI HYPERMOTARD 939 SP, DUCATI HYPERMOTARD 939, DUCATI HYPERMOTARD 950 SP, DUCATI HYPERMOTARD 950, DUCATI HYPERMOTARD Hyperstrada 939, DUCATI MONSTER 1200 R, DUCATI MONSTER 1200 S, DUCATI MONSTER 1200, DUCATI MONSTER 821, DUCATI MONSTER 937, DUCATI MULTISTRADA 1200 Enduro, DUCATI MULTISTRADA 1200 S Pikes Peak, DUCATI MULTISTRADA 1200 S, DUCATI MULTISTRADA 1200, DUCATI MULTISTRADA 1260 Enduro, DUCATI MULTISTRADA 1260 S Pikes Peak, DUCATI MULTISTRADA 1260 S, DUCATI MULTISTRADA 1260, DUCATI MULTISTRADA 950 S
Water pump protection
I bought it to protect my car's water pump.
Since the water pump will not work if it breaks by falling over, etc., I prepared for the unexpected.
It's very easy to install, just replace the NORMAL bolts with the included bolts, and you'll be replacing the bolts in three places.
I like the look of it.
View detail
Fits: MV AGUSTA TURISMO VELOCE 800, MV AGUSTA TURISMO VELOCE 800, MV AGUSTA STRADALE 800, MV AGUSTA STRADALE 800, MV AGUSTA RIVALE800, MV AGUSTA RIVALE800, MV AGUSTA DRAGSTER 800, MV AGUSTA DRAGSTER 800RR, MV AGUSTA DRAGSTER 800RR, MV AGUSTA DRAGSTER 800, DUCATI Scrambler Urban Enduro, DUCATI Scrambler Urban Enduro, DUCATI Scrambler Sixty2, DUCATI Scrambler Sixty2, DUCATI Scrambler Icon, DUCATI Scrambler Icon, DUCATI Scrambler Full Throttle, DUCATI Scrambler Full Throttle, DUCATI Scrambler Classic, DUCATI Scrambler Classic
Tough.
It has an Enduro-like design and is Tough. Therefore, it is heavier than the others.
As I am mainly touring and my mileage is about 300-450km at a time, I thought it would be difficult to get tired even if I put my feet on it for a long time. I never felt that the sole of my foot was tired and there is a sense of stability when I put my foot on it.
My car is MONSTER S2, so I like it.
Installation is the same as the other footpegs.
View detail
Stylish
I didn't like the NORMAL Blinker, so I bought it. I hesitated about many things, but I chose this one, which is Simple and Stylish, and the price is not surprisingly high.
I had the installation done by Dealers. The resistance seems to cause high flasher if it is not put in.
There was no problem with the inspection because eMark is available and the manufacturer's agent is in the FOR JAPAN MODEL.
The lifespan of the leds is about 1 year and 8 months, and half of 1pc. of the front and back 4 blinkers have failed.
I'm switching to Micro Blinker right now, but I'm thinking of switching back to this one sooner rather than later.
View detail
Fits: DUCATI MONSTER 1200S, DUCATI MONSTER 1200R, DUCATI MONSTER 1200
for OEM.
I was worried about the durability because it is Carbon and very light, but I had no problems with it.
Please note that these are for the OEM Fluid Tank and are not compatible with the DucatiPerformance Tank or other brand products.
View detail
Fits: DUCATI MONSTER 1200, DUCATI MONSTER 821, DUCATI MONSTER 1200R, DUCATI MONSTER 821, DUCATI MONSTER 821, DUCATI MONSTER 821, DUCATI MONSTER 821, DUCATI MONSTER 821, DUCATI MONSTER 1200R, DUCATI MONSTER 1200R, DUCATI MONSTER 1200R, DUCATI MONSTER 1200, DUCATI MONSTER 1200, DUCATI MONSTER 1200, DUCATI MONSTER 1200, DUCATI MONSTER 1200, DUCATI MONSTER 1200S, DUCATI MONSTER 1200S, DUCATI MONSTER 1200S, DUCATI MONSTER 1200S
I like it.
Since the base color is Red and Black, it was hard to decide whether to use only Red or Combination of Red and Black, but I decided on Combination of Red and Black.
I like the calmness and the Red Accent.
Installation is very easy, just cover the OEM and tighten with the included bolts.
View detail
Stylish.
A very stylish Bar End.
It is easy to install, but it is different from other Bar Ends.
View detail
Fits: DUCATI XDiavel, DUCATI Multistrada 950, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200S Touring, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200S Granturismo, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI Multistrada 1200 Enduro, DUCATI MONSTER1100EVO, DUCATI MONSTER 821, DUCATI MONSTER 1200R, DUCATI MONSTER 1200S, DUCATI MONSTER 1200, DUCATI DIAVEL, DUCATI HYPERMOTARD939, DUCATI DIAVEL
If you want to use Clear Clutch Cover, you can also use this.
I purchased this along with the RingPressure plate when I purchased the Clear Clutch Cover.
The installation was done by Dealer.
It has been quite some time since I installed it and I have had no problems.
The combination of the Clear Clutch Cover, RingPressure plate, and this is quite noticeable.
View detail
![RingPressure plate Oilba ScratchDUCATI [RING PRESSURE PLATE OIL BATH CLUTCH DUCATI]](https://global.webike-cdn.net/photo/impression/28/284b78f32fb59be1a2582b4eedcf81f1L.jpg)
Fits: DUCATI Multistrada 1200, DUCATI Multistrada 1200 Enduro, DUCATI MONSTER 1200R, DUCATI MONSTER 1200, DUCATI Multistrada 950, DUCATI Multistrada 1200S, DUCATI HYPERSTRADA, DUCATI HYPERMOTARD939, DUCATI XDiavel, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200S Touring, DUCATI 959Panigale, DUCATI DIAVEL, DUCATI 1299Panigale, DUCATI 1299 Panigale S, DUCATI MONSTER1100EVO, DUCATI 1199Panigale, DUCATI 1199Panigale S/Tricolore, DUCATI 1199Panigale R, DUCATI MONSTER 821
Since we're here.
I bought it in conjunction with the purchase of the Clear Clutch Cover, rather than purchasing it later.
It is a triangular RingPressure plate that rotates. There are several colors to choose from, so it is a good idea to combine them with the colors of the Clear Clutch Cover.
This product itself is not very expensive.
View detail
Fits: DUCATI GT1000, DUCATI ST4, DUCATI ST3, DUCATI Multistrada 620, DUCATI Multistrada 1100/S, DUCATI MONSTER 1200R, DUCATI DIAVEL, DUCATI HYPERMOTARD796, DUCATI MONSTER1100EVO, DUCATI MONSTER620, DUCATI MONSTER695, DUCATI MONSTER796, DUCATI MONSTER S2R, DUCATI MULTISTRADA 1200, DUCATI MONSTER 1200, DUCATI 848, DUCATI 848EVO, DUCATI STREETFIGHTER848, DUCATI SPORT1000, DUCATI 848EVO
It's a good look.
It has been quite some time since it was installed. Maybe two or three years.
There are no problems, and the Clear part is not dull.
Oil Filler Cap is a material:I use the OEM ones because they are aluminum and sticking is a nuisance, but there are no oil leaks, etc.
On cooler days, it will cloud over for about an hour after starting the ride, but it will disappear as long as the ride is running.
I thought it might be difficult to step on the rear brake pedal, but I can step on it without any problem.
I purchased Combination in Black with Red edges and Anodized has not faded yet.
View detail
![Clutch cover Oil bath [Color] Clear](https://global.webike-cdn.net/photo/impression/76/76bc0bb45a200a6cd2578038d001f997L.jpg)
Fits: DUCATI SPORTCLASSIC Sport 1000 S, DUCATI SPORTCLASSIC Sport 1000 Biposto, DUCATI SPORTCLASSIC GT 1000, DUCATI SPORT TOURING ST4, DUCATI SPORT TOURING ST3, DUCATI MONSTER 1100 EVO, DUCATI HYPERMOTARD 950, DUCATI HYPERMOTARD 950 SP, DUCATI HYPERMOTARD 796, DUCATI DIAVEL 1260 S, DUCATI DIAVEL 1260, DUCATI DIAVEL 1200, DUCATI XDIAVEL 1262 S, DUCATI SCRAMBLER 800 Icon, DUCATI SCRAMBLER 800 Cafe Racer, DUCATI SCRAMBLER 800 Full Throttle, DUCATI XDIAVEL 1262, DUCATI SUPERBIKE 848 EVO CORSE, DUCATI SUPERBIKE 848 EVO, DUCATI SUPERBIKE 848
Slider.
This is a slider for the clear part of the Clear Clutch Cover, which I bought because I thought I would cry if I got a scratch on it as the Clear Clutch Cover is quite expensive.
Installation Bolts are also included. The Installation Instruction Manual is one piece, but Torque should have been listed, so if you have a Torque wrench you can do it yourself.
The OEM Clutch cover is trapezoidal when viewed from the side, but the Clear Clutch Cover is square, so I was worried about the boots hitting the release of the rear brake. When I installed this Slider, there was more anxiety, but it has never hit it though it has been nearly one year. It depends on how to place the foot.
View detail
The construction is beautiful.
I bought this product because the Rubber portion of my previous CNCRACING Lab One Grip was quite worn out.
As with the Lab One, the Inner on the Throttle side was installed using the OEM's.
I'm looking forward to seeing how long it lasts as I felt the lab one wore out surprisingly quickly.
The only difference in design between the Lab One and the Lab One is the shape of the Grip end, which is the inner side of the body when worn, is different.
View detail
Fits: DUCATI HYPERMOTARD821, DUCATI MONSTER 821, DUCATI MONSTER 1200S, DUCATI MONSTER 1200, DUCATI HYPERSTRADA, DUCATI HYPERMOTARD821
Spacer for Handlebar Post.
I bought it along with CNCRACING's Handlebar Post because I changed my Handlebar from OEM to rizoma's DragType and it was 2cm short of the height to pass inspection.
It also comes with a Bolt for mounting.
I've been using it for about a year since it was installed and have had no problems.
View detail
Fits: DUCATI MONSTER 821, DUCATI MONSTER 1200S, DUCATI MONSTER 1200, DUCATI HYPERMOTARD939, DUCATI HYPERMOTARD821, DUCATI HYPERSTRADA, DUCATI HYPERSTRADA, DUCATI HYPERMOTARD939, DUCATI HYPERMOTARD821
I like it.
I bought it together with RiserUpper because I changed the Handlebar from OEM to rizoma DragType one and it was not high enough for inspection.
Since the Handlebar is a rizoma, I thought about getting a rizoma one, but I went with the CNCRACING one because of the looks.
I was worried about the strength and durability because the area in contact with the Handlebar is smaller than the Handlebar Post of OEM, but it has been more than one year since installation, but there is no problem.
The price is reasonable, but it is imported from Italy, so I think it is standard.
View detail
Fits: APRILIA RSV4, DUCATI MONSTER1100/S, DUCATI MONSTER1100EVO, DUCATI MONSTER696, DUCATI MONSTER796, DUCATI STREETFIGHTER848, DUCATI Scrambler Classic, DUCATI Scrambler Full Throttle, DUCATI Scrambler Icon, DUCATI Scrambler Urban Enduro, DUCATI XDiavel, KTM 1190 RC8R, MV AGUSTA BRUTALE1090, MV AGUSTA BRUTALE1090R, MV AGUSTA BRUTALE1090R, MV AGUSTA BRUTALE1090RR, MV AGUSTA BRUTALE1090RR, MV AGUSTA BRUTALE920E, MV AGUSTA BRUTALE990R, MV AGUSTA F4 1000R
It is as expected
I bought the Repeat because I liked it on my previous Z1000.
Flange and Cap are sold separately, so at first glance it seems like a hassle, but there is a Merit that allows you to separate the Anodized colors.
View detail