Reviews
no problem
There were no problems, and the product could be used normally. View detail
Good
I use it for 250 Oil replacement.
It comes with gloves, so I think it is a very friendly product. However, I am not using it because I am using something else.
View detail
For Oil processing
[How is it used?
I purchased the Oilfor Replacement for the Grom along with Oil.
How was your experience with it?
Thankfully gloves and Band are included.
Oil was also dumped without leaking.
How did it compare to other products?
Unknown, as it has not been used for anything else.
[Points to note]
I would not recommend it in windy places, with a little regret,
View detail
1.I wish I had a 5L one.
In my oil replacement environment, 1.5L is just right, but 2L will still be enough, so I mix waste oil such as tempura oil and dispose of it.
In fact, I was thinking that a suitable waste oil box from the Homesensee would have been fine, but since it functioned fine, I decided to continue to purchase it along with Oil.
View detail
Easy to dispose of garbage
Purchased for my first Oil replacement.
I don't know about you, but I was impressed that I could smoke a lot of dirty Oil and throw it away like this.
The cospa is also the best!
View detail
Cospa good
There is no problem regarding disposal of waste oil for motorcycle use. View detail
Necessities when changing Oil
This is the first time I have used this product, and it is a convenient product that fits tightly into the mouth of Honda's UltraG1 and can be disposed of as is.
However, if the engine is a Vertical TypeEngine and refueling is done from above, the nozzle part is a little short, and there were times when the oil would spill unless the kick pedal was removed on my vehicle.
I would be more than happy to have a longer Nozzle as a separate Spec.
View detail
Cheap Oil nozzle
If oil is poured directly into a motorcycle, there is a risk of spilling it, so it is safe to add a nozzle.
I bought this product because it was recommended to me. There is nothing special about it, but I think it is a product that can be recommended to everyone because it is inexpensive and has no problems in use.
View detail
Compact!
Used to replace Oil in crf250l!
This was sufficient!
The excess oil was also poured directly into this area to fit!
Vinyl gloves and an in-hemp palmook are also included for easy work and cleanup.
View detail
Buy in bulk for Oilfor Replacement
[How is it used?
Purchased for Oilfor replacement of PCX125.
How was your experience with it?
It is a normal, common OilPack! I'm glad I was able to use it without any problems.
How did it compare to other products?
I have used many different products and they all seem to be the same, especially the ones I have used!
[Points to note]
You should spread the bag tightly before replacing the Oil and be careful not to overflow.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
Compact than I expected
When I received it, it was more Compact than I expected.
Gloves are also useful.
View detail
Required for Oil replacement!
[How is it used?
I use this when I change the oil in my Scooter! I had to cut a dry plastic bottle to pour the oil, but it was a hassle, so I bought this product. I am glad that it became easy.
How was your experience with it?
Of course it is easy to use. It is a common Nozzle? I would appreciate it if you could put it with the Oil when you buy it. It gets sticky after one use, so I think if you wash it thoroughly and store it, you can use it again.
How did it compare to other products?
I felt there was not that much difference. I think they are the same.
Might as well buy them together when you exchange Oil!
[Points to note]
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
Easy to use
It was very easy to use. I just don't know if I'll be able to store it. View detail
Safety and environmental protection
We repair and maintain motorcycles by ourselves, and the replaced waste engine oil must not be thrown away. This Webike Garage Oil Disposal BOX is purchased for waste engine oil. It has a capacity of 2L, which is enough to maintain my scooter. If necessary, it also has For the 4L model, nitrile gloves are also included so that your hands will not get dirty when draining the oil bolt. -------------------------------------------------- -------- We repair the motorcycle ourselves, and the replaced waste oil must not be poured off at hand. This Webike Garage Oil Disposal Box is purchased for the installation of waste oil. It has a capacity of 2L to maintain my pedal. The 4L model is also included in Dingyu gloves, so that the hand will not stain the hand when the oil bolts are placed. Powered by Google Translator View detail
Unexpectedly easy to lose
[How is it used?
When I buy Oil, I find myself buying it together.
It can be used many times, but after using it once, I am very prone to losing it.
Made in foreign countries (A little expensive) Plastic containers that are a bit nifty have nozzles at the mouth, but many Japanese tin plate cans, such as OEMOil, do not. You will need such a nozzle.
How was your experience with it?
Basically, it can be used for 1L tin plate cans, whether Honda, SEA BASS, or Yamalube, since the tin plate can itself is almost the same.
If the oil inlet protrudes from the outside, this is sufficient, but if the oil inlet is located a little further back, such as on a scooter, or if the inlet is extremely narrow, as on some off-road motorcycles, a gardening funnel or narrow-necked Sprinkling can is easy to use.
How did it compare to other products?
First, it is”by far”easier” than pouring directly without anything. Pouring without anything usually results in spillage and contamination of the Engine. The dirt on the dripping oil is disastrous.
Plastic funnels are available at 100-yen stores, but once you use one, you have to wash it again or use different types of oil, so it is better to have several disposable funnels. It might be a good idea to buy 10 or so in bulk since they are inexpensive.
[Points to note]
It is easy to lose it. I really don't know where it went. (Is it just me?)
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
I think the Timing I will use is when I change the Oil, so this is the area I would like to buy with it at that time.
Oil Disposal Box 4.5L Work GlovesQuantity:Set
https://www.webike.net/sd/21779950/
→Nitrile gloves are Quantities:The set is the main point. 4.5L is enough for 2-4 oil changes in Motorcycle.
Tear-resistant paper towel
https://www.webike.net/sd/24985573/
→Paper waste is definitely the way to go. I really recommend this one because it is tear resistant and can be used all the time.
View detail
Solid construction
The box itself is a reasonable Large size, so the Bolt may come out of the bag if you do not remove the Bolt after determining the target from the Drain.
The motorcycle is small and the amount of oil is only a little over 1 liter, so there is plenty of room in terms of capacity.
I like that it comes with a Fastener to hold the inner bag and Vinyl gloves to keep my hands clean. I have been using it for a long time now.
View detail
The box is small and nice! ★Small and nice!
The box is small and nice!
It is very easy to use because it can be slid directly under the Drain.
It also contains plenty of absorbent, making it a great oil replacement for SmallEngine Displacement VolumeMotorcycle.
Personalized Brake fluid replacement waste oil receiver (Extend Hose from Breeder and directly into the box) It is also useful for (^^)
View detail
It is best to create an Oil pool in the middle before use.
When Oil is allowed to fall naturally, more of it overflows through the surface than is sucked in. 。 It is a good idea to make an Oil reservoir in the middle. 。 According to the service manual, the amount of oil for Z125pro is 900cc, but if the oil is added while checking the gauge, 1000cc is the appropriate amount. (In fact, we had no problem even with half the 500cc.) When changing oil, flushing is done with cheap mineral oil at 1000 yen/L and running for about 15 minutes. (It can be rotated to high RPM) Then, we put in RACINGGrade Oil, which is our main product! 。 It is not surprising that it is cheaper than flushing oil. 。 So, we process 2L of waste oil at a time, so it is convenient for us to use! 。 The tightening Torque of the Drain is 28. View detail
It's easy
I used it to replace the Oil in today50. No problem. I thought the gloves were kind. View detail
Gloves are good.
Gloves included are pretty good, good price. View detail