Reviews
Useful accessory if you’re tall.
I bought these along with the Agura campchair as I suspected the chair would otherwise be too short the feet- I'm 180cm tall & have an ACL deficient knee. When using the chair with foot ends installed, I was at a perfect height for interacting with our cassette stove & campfire etc. The foot end mounts stay in place on the chair legs once fitted & the feet themselves are easy to fold up neatly along with the chair legs when packing up the chair. View detail
KaEdia is still good!
Although many companies have released SMARTMonitor, I have been waiting for CaEdia's product. I have been waiting for a product from CaEdia because, after all, it is the most cost-effective. I have purchased many of KaEdia's products and knew their high quality and high cost performance, so I had no hesitation in deciding that the SMARTMonitor would also be made by KaEdia. After more than two months of ordering, the SMARTMonitor finally arrived.
There was a small product defect there. It was a paint bald on the housing.
I immediately contacted KaEdia and they were able to promptly replace the item with a good one. As expected of JapanBrand ^ ^.
After installing it, the actual feeling on the Motorcycle is perfect!
View detail
Fits: HONDA CB400SS, HONDA CBR400F, HONDA CBX400F, HONDA CBX400F, HONDA GB400, HONDA Rebel250, HONDA REBEL, HONDA REBEL, HONDA CB400SF, HONDA CB400SF, HONDA CB400SB, HONDA CB400SF HYPER VTEC Revo, TRIUMPH STREET TRIPLE, TRIUMPH BONNEVILE, TRIUMPH SPEED TRIPLE S, MV AGUSTA BRUTALE750S, DUCATI M400S, DUCATI M400METALLIC, DUCATI M400DARK, DUCATI M400DARK
Blue empty parking.
Used for DUCATI 996.
I bought this because I am renting and park Blue empty, but I never want to let it rust because it is a rare car.
The rainy season is absolutely RECOMMENDATION.
It also has a hole for a lock, which is a little expensive, but it is a must-recommendation for those who park Blue empty.
View detail
Very good
Delivery was fast, and the product was great. I would like to recommend it to everyone. Very good. Highly recommended. . View detail
![Mono-lock Case [E43NTLD]](https://img.webike-cdn.net/catalogue/images/105397/95339_TS.jpg)
Large also means Small Yes!
I have recently been commuting on my motorcycle more and more and was feeling that my old B32 was running out of capacity, so I bought this E43 just in time for the start of Webig's sale at Timing.
It arrived as fast as possible because it was in stock, so I installed it on DJEBEL right away.
I am very satisfied with the capacity, which is sufficient for commuting.
It is wider than the B32, so it feels larger now, but I think you will get used to the larger size as you start using it.
It would be great if it came with a non-slip rug on the bottom of the interior, but maybe I'm being a bit greedy? LOL!
View detail
Fits: Others , SUZUKI DL1000 V-STROM1050, YAMAHA TENERE700, HONDA CT110, DUCATI SCRAMBLER, SUZUKI V-STROM250, BMW R1150GS, KAWASAKI NINJA250, YAMAHA XSR700, HONDA CB400SUPERBOLD'OR
PCX160 8BK-KF47 Mounting on
Purchased for daily use such as shopping for two and for overnight touring.
The installation is done with multiple one-touch belts, so anyone can do it.
However, if the Belt to be installed is Quantity:Pair (for Left and Right) somewhat on Seat's buttocks as it straddles the
Interference.
The capacity is large enough to hold a helmet and many other items.
The waterproof property is also excellent, so rain will not be a problem.
The flap (lid) is held in place with magic tape to make it waterproof,
This guy is super powerful. (Lol) The one-touch is not easy to open and close.
However, it is unavoidable in order to maintain the waterproof function.
View detail
Fits: Others , DUCATI MONSTER 821, SUZUKI V STROM250SX
As expected of a DAYTONA product.
This is just my personal opinion, but I think it has a chic design that can be used by everyone, and it does not look out of place on any motorcycle. It is well made, the functions are well thought out, and it is easy to use. If you have this bag, it will fulfill the role of a large bag. View detail
It may not be a strong anti-theft device, but hopefully it will deter theft, if only a little.
I wonder if it will play a role in preventing theft of my helmet. I bought it to use together with Helmet holder
Portability is good, but Wire diameter is not that thick and I think it would cut if I wanted to cut it.
However, I expect that there will be an extra step of Wire disconnection to take away, and that it will deter theft by making people think they are doing something by the way they look.
View detail
Fits: YAMAHA FZX250 ZEAL, YAMAHA XJR400DIVERSION, YAMAHA XT250X, YAMAHA TZR250RS, YAMAHA XJR400, YAMAHA TW225, YAMAHA tricker XG250, YAMAHA TW200, YAMAHA SRX250, YAMAHA SRX400, YAMAHA SRX600, YAMAHA SR500, YAMAHA SRV250, YAMAHA RZ-1, YAMAHA SR400, YAMAHA Renaissa, SUZUKI BANDIT400V, SUZUKI VANVAN200, SUZUKI BANDIT250, SUZUKI BANDIT400
Very good!
[How is it used?
I bought this because my 3 year old DAYTONA Motorcycle CoverSIMPLE LLSize (https://www.webike.net/sd/23823142/) had reached its limit. I was going to buy another DAYTONA, but it was late in coming in, I chose this one which was in stock.
Was the one you received as per Image?
It is thicker than I expected! It's a different level from the Covers under 5,000 yen. I didn't expect to receive a product of such a different level just by paying a little more.
How was your experience with it?
I bought the LL size after checking with the model that fits my VTR1000SP2, and it's just the right size for my VTR1000SP2. There is a rubber like Pants in the front and back, so you can adjust it to some extent.
[Included Parts:were they on?
It comes with a storage bag. But it is quite thick, so I think it would be quite impossible to store it in that bag… lol.
[Was there anything that disappointed you?
If it lasts more than 2 years, I won't say anything. The price is the price. I expect it to be durable to UV rays.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Motorcycle covers should be inexpensive, but it is a good idea to buy a new one from a well-known manufacturer in 2-3 year cycles. It doesn't matter what you use when you leave it outside.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000 F, SUZUKI GSX-R1100, SUZUKI GSF1200, SUZUKI GSX-R1100, SUZUKI B-KING, SUZUKI GSX1400, YAMAHA YZF-R25, YAMAHA WR250X, YAMAHA WR250R, YAMAHA XJR400RII, YAMAHA DIVERSION, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400S, YAMAHA XJ400ZE, YAMAHA XJR400, YAMAHA XJ400Z, YAMAHA XJ400ZS, YAMAHA XJ400D
Black still seems to be vulnerable.
Used outdoors in full sun for less than 1 year and 2 months after purchase.
What was originally Black has faded and turned gray.
It also tore like a rip, so I had to use curing Tape to plug the hole for now. Is it still susceptible to deterioration by sunlight if it is Black?
I am using two more in parallel, Black and Silver. the Black is about a year old. It has faded a bit but still seems to stand up to the test.
I thought I was using them the same way, but I am wondering how a difference of two months can make such a difference.
Silver is about 5 months old. It is still clean.
I was lucky that the exhaust pipe was not touched.
Since the original price is over $8,000, it would be nice to have a little more durability. However, the Motorcycle Cover is a consumable item. However, Motorcycle Covers are consumable items, so I am not that dissatisfied with them since they cost around 4,000 yen at Sale and I prefer black. But I think I will get the Silver color next time.
View detail
DAYTONAMulti Bar Holder。
This is a quintessential DAYTONA product.
Fitting is outstanding.
Holderetc. on the bar.
View detail
Odo Loki's Coloring!
new product "B45+" It has amiami, backrest, and insoles, and it's just perfect!
No, no, no, no, no, no, no, no, no, no, no, no, no, no, no, no, no, no, no. Earth color. It was! Bigli!
I thought it would be the usual dull Silver, but when I opened the lid, it turned out to be "Color".:It was "Gray"!
I was really surprised because I was not aware of this result at all!
The 45LClass is lightweight even when fully equipped, and the design is simple, linear, and never boring, which is a good thing.
Furthermore, the PushDownCloseSystem is firmly adopted, so framing and unframing is comfortable and perfect!
View detail
Does a surprisingly good job.
This is an inexpensive Chinese Case that I have seen on some Site. (Although it has the company name of "Rough &Road" on it.)
It is inexpensive but does the job well. (For now)
It is installed on CT125CT110 HUNTER CUB (JA65), but it seems that Attachment for CT110 HUNTER CUB is not necessary separately and can be installed.
When the case is installed and the Center Stand is applied, the front of the case rises up like Seesaw. (Rear load Large)
Case surface is pear, satin, matte, textured and very dirty. Dust sticks to it.
View detail
Fits: SUZUKI GSX250R, HONDA CB1300SUPER FOUR, YAMAHA YZF-R25, SUZUKI GSX250R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER FOUR SP, HONDA CBR250RR ABS 2BK-MC51, HONDA CB650R, HONDA CBR650R, HONDA NC750X, HONDA CB1300SUPER BOLD'OR SP, SUZUKI GSX-R125, HONDA CB1000R, Others , SUZUKI GSX1300 HAYABUSA, YAMAHA MT-07, YAMAHA YZF-R3, KTM DUKE250, KTM 390 DUKE, KAWASAKI NINJA 250
Ideal Size for a little touring
It doesn't hold as much as it looks.
Please be aware of this.
It is good for day-touring, but only small items are available as souvenirs.
Design is good.
Match to Motorcycle.
View detail
It was Large favorite Cover.
GSX-R750 in the past (L1) I used to use it in
After all, the zipper makes it easy to put on and take off.
Heat-resistant material was originally used for the part of the exhaust system, so it can be hung right after getting off the motorcycle.
Silver-colored areas are thicker and less floppy.
Gentle lining Material.
I think it is well thought out for ease of use.
It's so convenient that I've grown attached to it.
At that time, it was used in areas with little sunlight and a simple roof.
Under those conditions, I would say the useful life is 2 years, 3 years at the most. It may deteriorate a little faster if it is exposed to sunlight.
I Repeat the same item once or twice.
Some may feel that the durability is not good, but considering the ease of use, it is not a bad buy. It is a recommendation especially if you are a frequent rider.
View detail
Quality is good; be careful if using with DH-706.
Including shipping, the price is a little high.
Although the quality is good, I can't deny that it is too Simple and a bit of a loss.
Nevertheless, the mounting components of the Seat bag are subject to a reasonable load,
This component seems like a good choice.
Incidentally, I ended up purchasing the DH-706 because the mounting parts of my beloved DH-706 were torn off due to age-related deterioration.
Others have mentioned that it was used with the DH-706, but strictly speaking, the shape of the mounting component (One-touchConnector?) is different and cannot be used without some ingenuity.
If you force it in, it will go in, but you will not be able to remove it.
I intend to reuse and use a broken OEM Product Connector, but I have to cut the product I just purchased to do so.
Please be careful if you are a future buyer.
View detail
No more running out of pegs
The bag fits easily around the waist on either side & it's a breeze to store all the pegs in it without hassle & there's a Velcro partition to separate pegs in the bag. The holder for a peg hammer is quite useful & there's an extra zip up pocket for any extra items as required. View detail
To renew the terminal where GreenBlue came out.
I bought a battered 900SS (900SL) and am Restore.
The body of the car is in shambles, but the Harness is fine! There is no such thing as a "wiring".
As in older Italian cars, there is a Bullet Type Terminal connection on the large quantity, which is suspect due to corrosion and other problems, so we decided to redo it.
These are best new!
We were not sure how many we would need for the entire body of the car, so we bought 30 more for now, including the stock we originally had on hand, with the expectation that we would not run out.
Male and Female are Quantities:It is not a Set, so it would be nice if the application is to use only One Side for Large quantities.
(I actually had to use only Male this time when I converted RearBlinker to LED)
It is a common Bullet Type Terminal and has no excess or deficiency in performance.
The surface finish, ease of crimping, feel when inserted, ease of removal, and ease of pulling out are all standard.
Since there is no such thing as too many Bullet Type Terminals, buying them in bulk is a recommendation because it saves you from having to go out and buy terminals when you need them.
View detail
Just attach it to the phone cover.
Quantity to Holder:Set is 90-degrees rotation, so the phone is in portrait and the Quantity:Set or beside Quantity:Set or not Set is determined by this orientation.
I can change it on the Holder side with Hexagonal Wrench.
I use it every time I go touring and have no problems.
Large Variety Satisfaction
View detail
For those who don't want to stand out with SimpleStyle
There are many different Smartphone Holders, but I think this product is the most discreet and easy to install.
In fact, it is so close to the Top Bridge that its presence can be eliminated.
If you want visibility, you can choose a Type to attach to the Handlebar.
Installation on the Holder is simply a 90-degrees rotation to fit the groove.
It will not loosen or fall off.
Satisfactory product
View detail