Reviews
Fits: HONDA CROSS CUB50, Others , HONDA CROSSCUB110, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA glom, HONDA DAX125
One change to the usual work?
JC92 I use for commuting.
Key it up as usual on a normal morning and press Cell starter.
In the midst of such repetitive work, there are times when I feel very happy about small changes.
The one that I installed this time is such a product that makes me feel small and happy.
Key box cover. it is a place where you can see when you put the key in the box, so it is not so plain but it gives a large impression.
This product has a lot of Coloring and compared with OEM, it is glossy and a little accent.
I chose the Red color.
It's very easy to install, just use double-sided tape and you're done in 3 minutes.
Even though the cost is relatively low, the cost effectiveness is extremely large because it leaves a large impression.
Because of the Motorcycle used for commuting, it rides even on a rainy day, but there is no problem in use. I don't think it will ever peel off.
However, as mentioned in other people's Reviews, the letters themselves tend to fade. It has been almost half a year since I bought it, but the letters are fading and I feel that the life span is short. I think it is inevitable because it is cheap, but ….
Also, the metallic color tends to fade easily, so we recommend you to buy black.
It can be said that it is the best product to add a small change to the usual motorcycle life.
However, since it is cheap, it will be of a reasonable quality.
I wouldn't get your hopes up too high.
It's something you should think twice about if you're considering a purchase.
View detail
Fits: HONDA MONKEY125, HONDA CT125, HONDA CRF250RALLY, HONDA CRF250M, HONDA CRF250M, HONDA CRF250L, HONDA CRF250L, HONDA MONKEY125, HONDA CT125
LOOKS BETTER THAN PICTURE...
hello for everyone especially monkey lovers. View detail
![[ZOOMANIA:ZooMania]Dry Carbon Ignition Cover](https://img.webike-cdn.net/catalogue/images/35129/TPZM-DC002A1-1_TS.jpg)
concealing one's home such that the interior cannot be seen from outside
CowlCover (？) The top of the Key cylinder was cracked and I bought this to hide it.
The cracks are well hidden and I am very satisfied.
It's not cosy considering its purpose, but it's a good quality product so I can't blame them. (Lol)
View detail
Fits: HONDA CROSS CUB50, Others , HONDA CROSSCUB110, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA glom, HONDA DAX125
It fades in an instant.
Easy to stick on like Seal.
I thought it was cool when you put it up!
It doesn't last a month to say the least.
I think it faded in a week.
If you can keep it for a year or so, I won't complain.
It's more like Pink now.
View detail
Fits: HONDA CB250R, HONDA CB125R, HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB, HONDA MONKEY125, HONDA MONKEY125, Others , HONDA GB350S, HONDA GB350
I like that the Manufacturer logo is understated.
I put Red on my MONKEY125 (Black).
I was confused with SP Mukawa's one, but I liked this one better because of the understated Manufacturer logo.
Installation is easy
Just degrease well and apply the included Double-sided Tape. It is easy to dress-up.
The only complaint I have is that the separator on the included double-sided tape is difficult to remove.
For some reason, one side is made of paper and will get soggy if you're not careful.
It is easy to remove it by putting Cellophane tape on it.
View detail
Fits: HONDA MONKEY125, HONDA CT125, HONDA CRF250RALLY, HONDA CRF250L, HONDA CRF250M, HONDA CRF250M, HONDA CRF250L, HONDA MONKEY125, HONDA CT125
Good Accent.
It's super easy to attach around the Keyhole with the included Double-sided Tape. Anyone can do it.
The addition of this RedPlating Accent to the Keyhole seems to make it look much better.
I also like the fact that the key location information is well printed.
View detail
Fits: HONDA CB250R, HONDA CB125R, HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB, HONDA MONKEY125, HONDA MONKEY125, Others , HONDA GB350S, HONDA GB350
Easy to apply ♪
Easy to install, just stick it on both sides
Only you can see it when you put the key in the lock, but it gives a sense of custom.
View detail
Fits: YAMAHA CYGNUS X, YAMAHA MAJESTYS, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
Easy installation!
It is very easy to install, just use a fine Hexagonal Wrench and tighten the supplied screw by 1 pc.
However, it may need to be designed to prevent falling and theft.
It would be nice if the price was a little lower.
View detail
Fits: HONDA glom, HONDA SUPER CUB110, HONDA SUPER CUB 50, HONDA CROSSCUB110, HONDA CROSS CUB50, Others , HONDA DAX125
Can be used for YAMAHA's old MODEL
It is sold for HondaGROM, but I tried to divert it to YAMAHA because the Size was similar.
It is installed on R1-Z.
It is attached to the cylinder of the shape shown in the picture, which was often used mainly in the 80's and early 90's!
RZ-R, FZ, FZr, old SEROW, Virago, DT, TZr series, etc. etc.
I haven't tested if it can be attached to the cylinder with the depressed part where the key sticks after XJR.
There will be many cases where the Print portion of the key Position has become blurred due to age or scratches on the key tip.
This is the part that you always see, so let's refresh it with Paris.
This product is Anodized+Laser marking finish of Aluminum, so the texture will be improved.
I chose Blue this time, but modestly Black might have been better.
Installation is quick and easy as you just apply it with the included Double-sided Tape.
It is a good idea to degrease and clean the area around the keyhole with Parts cleaner before applying.
View detail
Fits: HONDA glom, HONDA SUPER CUB110, HONDA SUPER CUB 50, HONDA CROSSCUB110, HONDA CROSS CUB50, Others , HONDA DAX125
Mounted on a Grom JC75. This is a good one.
Installed on a JC75 Grom. the key box area was plain, but it was tightened up a little with Red One point. It's easy to dress-up with Double-sided tape to match the original display. It's cheap, so the cost is good. View detail
Fits: HONDA glom, HONDA SUPER CUB110, HONDA SUPER CUB 50, HONDA CROSSCUB110, HONDA CROSS CUB50, Others , HONDA DAX125
Key box cover
Item was initially ordered for GROM but used on a CRF250Rally anyway. Colour RED. Quality is fantastic. Fitment is perfect. Installation work is easy. Highly recommended item. View detail
Fits: HONDA CB250R, HONDA CB125R, HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB, HONDA MONKEY125, HONDA MONKEY125, Others , HONDA GB350, HONDA GB350S
Not bad for One Point-ish Occasional Items
I installed this key box cover on my JA55 CT125CT110 HUNTER CUB.
After degreasing and cleaning, use the included double-sided tape to attach it to the RingCover side first, and then attach it to the key box side.
Like the OEM ProductKey Holder I reviewed separately, this product, like the OEM ProductKey Holder, is more to your liking than its features? I think this is everything, but I think it's the gold color that stands out in the black color that gives it a nice one-point effect.
There is no demerit other than Cost ω
View detail
Fits: DUCATI 899Panigale, DUCATI 1299Panigale, DUCATI 1299 Panigale S, DUCATI 1199Panigale, DUCATI 1199Panigale, DUCATI 1199Panigale S/Tricolore, DUCATI 1199Panigale R, DUCATI 959Panigale
Bonsai Custom
Used to replace the OEM SteelBolt 。
no problems with cncRACINGScrew for Key Guard
PetitCustom, which is just a replacement
Self-Satisfied Custom
View detail
Fits: HONDA CB250R, HONDA CB125R, HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB, HONDA MONKEY125, HONDA MONKEY125, Others , HONDA GB350S, HONDA GB350
This is a manufacturer's product and I love the design
First of all, the color, design and functionality of the original Keyboard is fine I like it because it is easy to understand and key in View detail
Fits: HONDA CB250R, HONDA CB125R, HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB, HONDA MONKEY125, HONDA MONKEY125, Others , HONDA GB350S, HONDA GB350
Good design and functionality
Cost performance, design and functionality are very good The position of the key is easy to understand even at night, and it is convenient for Large Also, I felt the upgrading around the Panel was done I am blue View detail
Fits: HONDA CB250R, HONDA CB125R, HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB, HONDA MONKEY125, HONDA MONKEY125, Others , HONDA GB350S, HONDA GB350
Just a little bit of customization
It's just a little bit of self-satisfaction
A big modification will cost you a little bit of time and Gold, so just a little bit
Double-sided tape has strong adhesive strength, so cut it in half when you apply it I think it's better to put it halfway up so you don't have to I'm a little off
View detail
Fits: HONDA CB250R, HONDA CB125R, HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB, HONDA MONKEY125, HONDA MONKEY125, Others , HONDA GB350S, HONDA GB350
It's a place that's visible every time you point a key, so PetitCustomization!
I bought it before my motorcycle was delivered So I'm glad I bought it
I'm going to be careful not to knock it down because I was a little worried about its adhesive strength
View detail
Fits: HONDA CB250R, HONDA CB125R, HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB, HONDA MONKEY125, HONDA MONKEY125, Others , HONDA GB350, HONDA GB350S
High points, except for Cost
As the printing around the key cylinder was about to disappear, I was looking for some good items I found this one by hand
It may depend on the car model, but the display is easy to understand, so I'm very satisfied with it
There are three colors to choose from, so you can choose the color that best suits your machine for a little dress-up! Small Technique Items that become
But I think the list price is 1,000 yen (KIJIMA's website display, tax not included), but Webike has a 100 yen higher
Couldn't it be made more cheaply for small items? I think Although the process takes a lot of time and effort, I want Items to be released within 1000 yen including tax
I think it's hard to get a discount on these small items, but if they're sold near you, you can find them at the actual store It's cheaper to buy it at I used Point to buy it because I couldn't find it at any of the supply stores around me, but I'm not sure what to expect I think it's more economical to buy in bulk
The product itself is pretty good if you like the design of this one, so you can buy another one for Spare I'm considering whether I should do it
View detail
Fits: HONDA CB250R, HONDA CB125R, HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB, HONDA MONKEY125, HONDA MONKEY125, Others , HONDA GB350, HONDA GB350S
The mediocre key box is on the Switch!
The key box at the time of OEM was full of cheap feeling with the display of White on Black.
This product is an Attachment that only pastes Aluminum ring to Key box, but visual effect is outstanding only in the most visible place!
If you choose your favorite color, you will be glad to soak yourself with self-satisfaction and to stab the key.
I thought that the gold amount of over 1,000 yen is expensive, but if you can change your mood so much, it will be less effective than investing in poor Parts.
(It is a personal opinion to the last)
View detail
Fits: KAWASAKI GPZ900R NINJA [Ninja]., KAWASAKI GPZ900R NINJA [Ninja].
Of course the state of the new article is reviving
Before replacing it, I bought it because the White character disappeared and it did not look. Work that is less than three minutes to replace. After that, it is unknown why the key became hard to sand. View detail