Reviews
Indispensable
Truly beautiful piece and very well built, it replaces the ugly and insignificant original one, it also gives a touch of elegance. -------------------------------------------------- -------- Really beautiful and very well -built piece, replaces the original ugly and insignificant one. Also like a touch of elegance. Powered by Google Translator View detail
Fits: BMW R1250RT, BMW R1250RT, BMW R1200GS LC Adventure water-cooled, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Liquid Cooling, BMW R1200R LC water-cooled, BMW R1200RS LC water-cooled, BMW R1200RT LC water-cooled, BMW R1250GS, BMW R1250GS Adventure, BMW R1250R, BMW R1250RS
Rear Ask Protection
I installed it in the hope that it would protect the ASKUL portion of the BMW's features in the event that it was accidentally knocked over.
It seems to have a certain effect when stopped or driving at low speeds, but it is unclear how effective it would be in a normal driving fall.
I think it is safer to use it only for the purpose of protection in the event of a standstill.
View detail
Fits: DUCATI STREETFIGHTER848, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S Touring, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200S Granturismo, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI HYPERMOTARD821, DUCATI HYPERMOTARD821, DUCATI HYPERSTRADA, DUCATI STREETFIGHTER S, DUCATI STREETFIGHTER
Easy to install
It was easy to install, but after it rained, the included Screws were rusty. View detail
CNC O2 Sensor Guard from Opmid
* About quality and texture, CNC machined aluminium in a 3D shape that matches the shape of the sensor with semi-gloss finish. * About the feeling of use, Having the Opmid O2 sensor guard fitted to the engine adds to the premium look I'm after and the silver even though not perfectly matched ties in with the silver engine on the Monkey 125 better then the black did. Nice to have removed the cheap bulky looking Honda OEM guard. * Products to buy together, Another cheap looking Honda OEM part in this area id the front brake hose guard and Opmid also have a product available to dress it up. * Difficulty of installation, Installation is just 1 bolt for mounting and the plastic clip securing the O2 sensor wiring. The process was completed in 5 minutes with no difficultly. * Cost performance and comparison with other products, Apart from the cheaper costing Honda OEM part I have not seen this product offered by any other brands but priced similar to all the other little add-on like it. * About shipping and packaging, I am happy to wait 6 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems. * Any concerns, cautions, or advice when purchasing, You can purchase this O2 sensor guard on it's own or in combination with the front brake hose guard and they are available in silver and black. Use the product reviews to assist in making a decision on your purchase. View detail
Unobtrusive Custom
It's a good part without changing it, but it's custom made for the looks! I'm happy with the way it looks now! View detail
Moe the slightest change
Aesthetically, it's a completely uninspiring OEM Guard, not that I'm looking for beauty or anything, but just changing it up makes a slight difference and Large Moe! View detail
SensorGuard
I was looking at Meter and found it in Small stuff.
Replace if Refreshing rather than OEM.
View detail
SensorGuard
I've been playing around with a lot of things.
In OEM's SensorGuard
I couldn't stand the look of it and replaced it.
If it looks good, all the better!
Replacement is also easy.
View detail
I was worried. lol
O2 sensor guard.
I have been debating for about 6 months whether to buy it or not.
I didn't buy it before because it wasn't in stock, but this time it's in stock!
It's just a cover, so it has nothing to do with performance.
After thinking about whether to go with black or silver, I decided to go with the engine. Since it is Black
Silver would accentuate it a bit more. I think it would be good. Choice
Well, it looks more luxurious than a simple steel plate cover.
View detail
To prevent standing sickness
I installed it on KATANA.
I can't protect the Silencer completely, but I think this length is the best for its appearance.
View detail
Fits: DUCATI 796 MONSTER ABS, DUCATI 796 MONSTER, DUCATI 796 MONSTER ABS, DUCATI 696 MONSTER ABS, DUCATI 1200 MONSTER S STRIPE, DUCATI 696 MONSTER, DUCATI 1200 MONSTER S, DUCATI 1200 MONSTER, DUCATI 1200 MONSTER R, DUCATI 1100 MONSTER S, DUCATI 1100 MONSTER EVO, DUCATI 1100 MONSTER
Mount Kit
I wouldn't have bought it if the Body was discontinued and only the Mount Kit was available. View detail
One shot, smashed.
I'd rather buy a cheap skeletal Tire for this.
You can get four for the same price.
If you get hit by a mockingbird, it will shatter in one shot.
Shock may be absorbed, but if it shatters, not only will it not function as a Slider, but it will also cause the
That debris is scattered all over the Course and is dangerous.
We'll replace it with a better plastic one.
View detail
Fits: MV AGUSTA F4 RR, MV AGUSTA F4 RC, MV AGUSTA F4 RC, MV AGUSTA F4 RC, MV AGUSTA F4, MV AGUSTA F4, MV AGUSTA F4, MV AGUSTA F4, MV AGUSTA F4, MV AGUSTA F4, MV AGUSTA F4
R&G R And G TailSlider [F4RC]
I bought a Tandem Footpeg Bar.
To protect the rear cowl when riding with two people?
I don't have a ride.
Well, it's all about looks.
The special adhesive is Included Parts:but…
Installed with Double-sided Tape because I was afraid
In the MV AGUSTA F4RC
It's not like Fit as it is.
I'm trying to find a position where I can stick it! I think the correct expression is
View detail
Installed on JC75 Grom.
This is the O2 Sensor Cover, nothing more, nothing less. I was concerned about the 90-degrees breakage of the wiring, but we'll see. View detail
Looks good.
Instant replacement from OEMSensorGuard.
I'm leaving it at the motorcycle shop and just waiting for them to come back with a request to install it.
View detail
manual beginner
I am a beginner in hand assembly. I'm not used to it and I tore the tube many times and put it on and off many times, so the Rim Guard got a hole too. If you are new to this, Quantity:It might be better to have about 2 sets. View detail
How many pieces are in the box?
Body is Quantity:1 Set of 4pcs. but
This is a Quantity:1 Set of 2pcs. so you have to buy 2.
It would be nice to see it listed in the product Page.
View detail
It's a bit expensive
[How is it used?
I bought this to go with my Frame Slider from Rye TEC.
The standard AntishockRubber was White, so I changed it to Red to match the coloring of my Motorcycle.
Was the one you received as per Image?
The product itself was as per Image, but I thought that less than 2,000 yen is slightly high to buy a different color RubberMaterial product.
Was the installation difficult?
It's not difficult at all because you just need to replace the one that was installed as standard.
White is keeping it as a spare.
How was your experience with it?
First of all, I'm glad I bought it for what I saw.
White is not used anywhere on my vehicle, so I decided to use Red, the same color as the Frame, and it looks very nice, beautifully unified.
It remains to be seen how good a job this Rubber will do in the event of a fall, but I hope in theory that it will never see the day when it is useful.
[Included Parts:were they on?
There are no "Included Parts:", no Instruction Manual, and nothing to replace the Standard Equipment.
[Was there anything that disappointed you?
The only thing that bothered me a little was the price point.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI Ninja250, KAWASAKI NINJA400R, KAWASAKI ER-4n
Recommendation to who Tandem Footpeg is playing with
I installed it on my ZX-25R.
This was the only Kawasakifor Vehicle available, so I was very excited to see if I could fit it until it was delivered.
However, it was possible to install it without any special processing, just by converting the product bundle and OEM Product.
The product consists of two SliderBody (DURACON part installed) and two RubberWasherQuantity:2 Set+Clips for fixing x1pc.Quantity:2 Set.
There are some models where the dimensions fit perfectly, but for the ZX-25R, the Quantity:Pair (for Left and Right) I needed one RubberWasher for each of the
Kawasaki car did not use Clip because Tandem Footpeg fixed standard is E Ring.
As long as you can remove the E Ring, I don't think you'll have any trouble removing the OEM Tandem Footpeg.
Slider is assumed not to move, so there is no particular chemical required for installation. It is possible even if there is nothing (although it is better to clean it).
I think the only difficulty in installing this product is that the direct line of the Bolt is wider than the Center hole of the RubberWasher.
You don't need any tools except for the pliers to remove the E Ring (if you have pliers, it's the best, but if you don't have pliers, you can use Precision Slotted Screwdriver's large size) and Radio pliers to reinstall it. If I had to guess, I'd say an M6 40mm or larger BoltScrew would be easier to adjust for widening the diameter of the RubberWasher and aligning the holes.
I don't have any experience of falling on the ZX-25R, but if it's just a standing fall, it should only be a minor scratch on the underside of the duracon.
Also, the DURACON part is rather expensive, but it is sold separately and can be replaced.
With the ZX-25R's SEMODEL, I think this product, in addition to the OEM Frame Slider and Bar End, will be able to cover most of the other parts of the bike without any damage (except the Mirror), if the bike falls down to a standing error + α.
If you have a Tandem Footpeg playing around, such as those who use Single Seat, and you don't feel the Tandem Footpeg is in the way that much, I think you should wear this rather than removing the whole Holder. The sense of security is different.
Even as a preparation for such an eventuality, I think you'll like the design.
The ZX-25R has a short exhaust system, so unless you're crashing at high speeds or on strange terrain, you won't have much contact with the ground except for the OEMSlider, Bar End and Mirror.
View detail
Fits: DUCATI DESERTX 937, DUCATI HYPERMOTARD 939 SP, DUCATI HYPERMOTARD 939, DUCATI HYPERMOTARD 950 SP, DUCATI HYPERMOTARD 950, DUCATI HYPERMOTARD Hyperstrada 939, DUCATI MONSTER 1200 R, DUCATI MONSTER 1200 S, DUCATI MONSTER 1200, DUCATI MONSTER 821, DUCATI MONSTER 937, DUCATI MULTISTRADA 1200 Enduro, DUCATI MULTISTRADA 1200 S Pikes Peak, DUCATI MULTISTRADA 1200 S, DUCATI MULTISTRADA 1200, DUCATI MULTISTRADA 1260 Enduro, DUCATI MULTISTRADA 1260 S Pikes Peak, DUCATI MULTISTRADA 1260 S, DUCATI MULTISTRADA 1260, DUCATI MULTISTRADA 950 S
Water pump protection
I bought it to protect my car's water pump.
Since the water pump will not work if it breaks by falling over, etc., I prepared for the unexpected.
It's very easy to install, just replace the NORMAL bolts with the included bolts, and you'll be replacing the bolts in three places.
I like the look of it.
View detail