Reviews
I thought it was amazing at high accuracy.
I tried this part of Stainless Steel where I was using Aluminum parts so far, and the Brake line was all Stainless Steel.
When attaching, we settled with Torque as fast as described in the Instruction Manual. After going to Touring until now, we have tightened up again, when we bleed air with MASTER, some air was blowing, but after changing to here, even after using Brake with Hard, even one air entrained There is none. Aluminum parts may be deteriorated, but there is also higher rigidity than Aluminum so you can tighten it securely.
View detail
The angle is good.
Used in combination of MAJESTYS and brembo. We use it for 4 places in total, Front and Rear, Handlebar side, Caliper side, but all this has been reached at 30 degrees. Although Material is Aluminum, there is some uneasiness in Material strength, but considering the price difference with Stainless this choice of Aluminum is inevitable place. View detail
This angle is just right
MAJESTYS (SMAX) Used for combination of brembo. This 30 degree Handlebar side, Caliper side was also this 30 degree patchy. Although Material is Aluminum, it is difficult to tighten and there is some uneasiness, but price difference with Stainless is too much and Aluminum was chosen.
Washer for Crash can be relieved by preparing a spare.
View detail
Unlike Image
I am concerned about Material, but Stainless is too high so I made it to Aluminum Type.
Used for Brake lever part of MAJESTYS. Unlike Image, the angle was not enough, eventually I decided to buy a 30 degree adapter.
View detail
Reliable Stainless Steel
Hose side is also Stainless Steel, so I changed the Banjo Adapter to Stainless Steel.
You can avoid Trouble that it is cracked and cracked, so relief.
If it is Aluminum, is it too dangerous? - - - Although there is a conflict of saying, Because this is Stainless Steel, even if it tightens a little roughly, it is durable Large.
Banjo bolt uses OEM.
Hose also Black. Banjo is also Black, it's casually casually unknown to be outdoors by looking at it.
View detail
MASTER etc. Required when exchanging Items
When exchanging before and after for Mesh hose, because Master cylinder has been replaced with R6 OEM, Mesh hose Purchase for thought in Banjo by car type by same car.
Mesh hose There is no discomfort at all with the same color as Banjo and Bolt included.
Actually, when I attempted the installation work, the person who had other angles was better, but I used it as it is because there is no problem in using it.
As you can see, it was God Clearance - - - Because Mesh hose was different by car type, I ordered without considering deeply, but since it was selectable it should be originally from 1 pc to Quantity : Pair (for Left and Right) Should be a style to distribute to. When exchanging for Mesh hose, we recommend that you consider carefully the routing of the Brake line and the parts that you are changing, and consider making it more smooth handling.
View detail
It may be a little cheaper
When I made it to Rear Sets, I changed my handling as my heel began to hit Hose. I was able to change the handling as expected.
If the price is cheaper it's 5 stars.
View detail
Used for Brembo caliper
I changed MAJESTYS's Rear caliper to Brembo caliper so I bought Banjo accordingly. I bought a Goodridge made Hose by car type, but I used it to successfully install Hose.
Caliper is brembo 84 mm old Crab caliper. MAJESTYS's Rear hose uses a bit of care for handling Hose because the end portion is made of Gold genus instead of Hose.
Please be aware that it will be difficult to install because the Joint portion lies next to new Crab.
View detail
Sauce angle of Separate handle of KATANA is perfect
Brembo's Brake master cylinder (RCB) I used it for taking out from. It was perfect for the Sauce angle of KATANA's Separate handle at an angle of 45 degrees. View detail
Stainless banjo attention to thickness ...
This time, with Master cylinder change Banjo adapter from 20 degrees here StraightQuantity : Changed to 2pc.
I personally chose Stainless Banjo Adapter from long ago but Stainless becomes a little thinner than Aluminum.
The product has been using this Stainless Type in recent years so reliability is outstanding among me!
Since it becomes thin, I think whether it is good to consider things like Space rather than Aluminum Banjo Adapter in Hose Dual Silencer.
..., so far, there was not a problem in particular, but this time, I changed Brake 's Switch from Mechanical to Hydraulic Switch type attached to the tip of Banjo bolt, but due to its thinness BoltLength got a surplus bottom of MASTER There was a thing that can not be installed.
I thought that Large is durable if Hose also Goodridge and Hydraulic Switch Unify with Goodridge, but Goodridge also had Length setting of Aluminum Banjo Adapter.
Those who are considering Stainless Steel Type, especially Adapter Quantity : 2pc. Set use (HoseQuantity : 2 pc mounted), because BoltLength and Screw mountains to be mounted due to the thinness may interfere with the MASTER, so when you use the Stainless Banjo Adapter you also need to check the BoltLength, especially with changes from Aluminum Banjo Banjo bolt Please do.
View detail
The price - - -
I bought it in accordance with replacing Brake hose. Those of 30 degrees are very high compared to the straight type. It is MinusPoint because it is very satisfying because it looks and makes. View detail
It's as expected.
I bought it in accordance with replacing Brake hose. I think the straight type is cheap and looks a bit better. I highly recommend it.. View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
In the Radial master
I bought it because I want to use OEMHose for Brembo radial master. I think that it is good to increase the installation width if there are several kinds of Length.
However, since such Parts are not other, I think that it is worthwhile parts.
View detail
Though it is cheaper than other companies
I installed the Swage line for 14 Z 1000 ABS, but because I was exchanging it with Crab carry, the twist turned in the opposite direction.
By replacing this part it will be Crab carry correspondence.
View detail
To Rear master
Interference with the Exhaust System in existing Stainless mesh hose (Secure Clearance) As a result of thinking to avoid this product arrived at this product. Material : Because it is Stainless Steel, it is pretty, but it is pretty finished with a beautiful Stainless Steel color?. View detail
The center of Seal washer gaps
As there are other Manufacturers, because the diameter of the Seal washer installation position is thinner than the Screw part, at the time of tightening, the Seal washer Center will gap when you do not tighten Seal washer with your hand. View detail
Plating is beautiful
I bought it together with Buildaline's Brake hose. Brake hose's Banjo mounting part is Plating, so I chose this item. When installing, if too much force is put on and closing Banjo, Plating gets scratched, so caution is necessary for over tightening! Stainless Steel and Aluminum are lost, but there is a balance of Hose, so here It was good!
View detail
The angle is perfect !!
In this time, due to the introduction of Back Step, along with Rear master cylinder exchange, it was necessary to change the handling of Brake hose from MASTER and purchased this product.
angle / Shape is satisfactory.
Good shopping was done..
View detail
Reliable Brand
I chose reliable Brand and Cost performance.
This item is recommended.
Especially it can be used without problems. There is no problem in terms of function.
View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
From landscape MASTER to portrait MASTER
When changing from OEM's horizontal MASTER to Radial brake master, using this adapter you can use NORMAL's Brake hose as it is.
Screw Pitch 1. 25, so it is common with Brake Banjo bolt of domestic Motorcycle.
Bolt 1 pc price is reasonable, but I think that it is cheap shopping, considering the trouble of changing Brake hose or changing Banjo adapter.
View detail