Reviews
No problem
The texture is good, the price is lower than Earls and I use it every time. View detail
Brake line for new construction (3)
I purchased this for a GoodridgeHose conversion that has been used and proven.
I don't need to critique ・・・・ the texture and build quality is adequate.
Sorry, Webike, but Webike's product selection is Right-twist, Left-twist. It would have been better if it had been possible to select the Manufacturer's designation or Parts No.
View detail
Material should be matched.
Material:To match Stainless Steel's FittingHose, Material:Stainless Steel Banjo is my choice. Banjo in Stainless Steel.:Stainless Steel is the Material:Unlike aluminum, it is resistant to overtorque. View detail
Material is very good!
The angle of the brake hose line was a little tight, so I changed to Straight. The Stainless Steel material is very beautiful and luxurious. View detail
It is used for ZX-11 Oil cooler on CB1000SF.
25 years ago, the water-cooling oil cooler of a deoran car was put on, but it was not good enough, and because of the recent high temperature, I made a successful bid for the oil cooler for ZX-11 at Yahoo! ActiveBanjoAD was purchased in order to install the oil hose to this. The problem was that the screw specification of the hole cap of BanjoAD and PLTO did not match, so the UNF9/16 that meets the BanjoAD was substituted with the hose connector for the hydraulic machine. In addition, the female screw end face of this connector is flat, so the taper was cut and screwed in with a drill. By this process, the amount of screwing in can be increased by 1.5 turns and it became difficult to leak. Before this work, I tried hydraulic Elbow without BanjoAD, but it was difficult to handle oil leak and hose, so I gave it up. View detail
Simple and easy to use.
I installed it on MBK's sander, FranceYamaha's Max star125.
It's convenient because you can choose the angle.
I didn't know until I bought this Banjo adapter that you apply Molybdenum grease when you install it.
It said in the Instruction Manual that Torque management should also be done well.
A gentle instruction manual. (No Molybdenum in it, though.)
Banjo has both EarlsType and GoodridgeType, so it's better to buy them together at the time of purchase.
Because the hole position is different, it will affect the Touch of Brake in Large. Read more on the web!
So I bought Active's Banjo bolt as well.
View detail
I used it for STREET TRIPLE!
In order to make STREET TRIPLE a StuntSpec. In that case, this Banjo bolt was installed. The air is removed firmly and Brake can be operated now! View detail
I used it for STREET TRIPLE!
I used it to make the front brake of STREET TRIPLE into a mesh, and all the hoes are also active, so the Banjo adapter is also active! View detail
Used for MONKEYCrab!
The length of the previous Brake hose was too long and Banjo adapter 20° the color was too small, so I changed the purchase of Brake hose and Banjo straight. View detail
Anodized is very beautiful.
Compared to the Banjo adapter of Stainless Steel, it is very light. There may be a risk that the color will fade afterwards, but if you want to put in a mesh hose, Blue's Anodized is standard and beautiful. View detail
You can choose the angle you want.
It is very nice that Banjo adapter angle can be selected by various patterns to fit the situation of Master Cylinder and Mesh hose. Stainless Steel material is a very nice material with a calm atmosphere. View detail
I wish there was a more angled variety
I won a bid for a NISSIN 6-pot Caliper on Yahoo! after Overhaul Installed
Because the position of the Banjo bolt is different from TOKICO, the position of the Banjo bolt is 20 degrees I bought the adapter
Since the hose is WedgeLine, I chose the same manufacturer's hose! But when you try to install it, the joint part of Hose touches the Caliper installation part a little So I let it go inside a bit (The Left Side has a Banjo adapter stopper in that position Somehow it was OK :)
It would have been best if there was a 30-degree angle, but I didn't have it out on the Manufacturer, so I'm just going to do it anyway I've decided to keep it that way
Because Gun meta was discontinued in the color of Banjo, I chose Black, but Gun I hope meta is back (^^;
View detail
Let's get it strictly measured
If you are somehow thinking of replacing it yourself, be careful If you don't measure the length of the Hose and the angle of the Banjo pretty well before you buy it, you'll get an awkward result It will be
If it's just awkward, it's okay, but the way you handle it, such as the slippage between the parts and Wound to Hose It's dangerous if you become
Recommends having it done at a Motorcycle shop
View detail
misjudgment
Measure the angle of each place you're going to use it and buy it Let's
If you want to achieve a beautiful, safe, and flawless handling experience, don't be stubborn We recommend that you ask your Motorcycle shop for help
View detail
I wish it was a little cheaper
With the radialization of the Clutch master on the ZrX1200R, the 45 degree I needed an adapter, so I bought one, using Goodridge's Hose You can find out which manufacturer's adapter you can use at the time of purchase on the Net I even went through each manufacturer's Crimp system to find out If Goodridge, Goodridge, Active, Swage line, and the Swage line can be used with the Banjo bolt It is necessary to pay attention to the thicker parts of the product I would like to see the adaptation table for each manufacturer and the parts that can be reused, etc. described in the product description It is
I've done a lot of research on Radialization, so I ended up with No Trouble
View detail
Easy to install!
Restored GSX400XS's Brake hose has deteriorated and I decided to replace it with a new hose at Hose Because there is no Banjo bolt, I bought it, and for a moment, I was worried about tightening it with aluminum It was easy to tighten up, no leaks, and Large satisfaction! View detail
Easy to install and cost
I replaced the brake hose on my Restore GSX400XR with a new hose I needed bolts, so I approved them, but they were extremely easy to install and looked There! I am satisfied View detail
Customization of various shapes
I used it to adjust the angle when installing the Radial master and Mesh hose
It is fun because you can choose various shapes for customization
The bad point is that the installation is a large, but because it is a security part, it is important to install it safely and accurately I mean difficult
View detail
Beautiful colors
I bought it at the same time as the company's Mesh hose
I find the choice of angles and colors to be excellent
I'm looking forward to installing it now
View detail
of high quality
I bought it at the same time as the company's Mesh hose
It's going to be a quality look compared to the OEM Hose
Installation is still to come, but I'm looking forward to the completion of this project
View detail