Reviews
Satisfied with Large Ki
Because it was broken from the root part with standing, I exchanged it.
Nisshin's Rapon, but only Cup was made with brembo. Did Owner's commitment before?.
View detail
Installation is still going
We purchased RCS 17 one foot before the installation due to planned installation. With regard to brembo, since the diameter of Nipple part of Hose connecting Tank and Master cylinder will be different from FOR JAPAN MODEL products, OEMTank will be different in diameter, so it is also a choice from the point of making Manufacturer.
There was also an opinion that making was suitable for price, but because it is a part of this hand it is not possible without impossibility. I think Bracket that fixes Tank will be required processing.
View detail
Diversion to Front brakes master
Purchase to make Refreshing around Handlebar. This amount is more than enough unless you regularly check the amount.
Neck is to increase the number of times Fluid replenishes when bleeding.
View detail
Fits: Others Radial brake master cylinder, Others RCSBrake master cylinder
Separate Tank
Previously I used Bank's Tank integrated type, but with Separate handle it was hard to remove air and attaching a Breeder to the MASTER, so I tried to replace it.
After all it is good to refresh the appearance of Tank separate body!
Because it is Set, I think that it is also good to obtain it easily.
View detail
![[NISSIN Repair Parts For Master Cylinder] Tank Set](https://global.webike-cdn.net/photo/article/90/1435652881090L.jpg)
I do not have wide choices but ...
If you get lost, it's Kore (lol
【What made you decide the purchase?】
Stable Nisshin.
It's a choice without hesitation as Raipong was Nisshin.
【How was it actually used?】
With Quantity : 2pc. It will be a set of eyes, but it may be better to be familiar.
I never get lost about usage.
【Was it difficult to install? (Hard parts case)】
Just insert it into the Master cylinder according to Hose's Curve.
Do not forget Hose clip ... (I forgot it on the picture ... bitter smile)
【Please tell me the point of installation and hang (in the case of Hard parts)】
Material : Because it is Plastic, will not it be over tightened too strongly.
In addition, although it is Screw of the detention part, it is easy to rust, so it is a caution after raining in the rain.
[Is there anything I was disappointed about?]
Nothing in particular.
But maybe a little Small's stuff may come out.
【Hope for Manufacturer - Please let me know if you have any improvement points]
To Manufacturer, or rather, there are few places that Small shops handled so much ... so even as Repair Parts.
That point, Webike is safe. You can buy it anytime..
【Have you compared items?】
Actually, I had a blubo FluidCup on hand, but of course the Hose diameter is different so I can not use it for Nisshin.
Size feeling is better over there.
But Nisshin's Repair Parts you can get anytime can be used with confidence.
[Others]
This time, when purchasing a radiapon, I purchased a new one, I use it from the original MASTER Horizontal.
Ease of use and durability, etc., I know its features, so I can use it with confidence and there was no hesitation when I newly purchase it in that sense.
You can safely use the Manufacturer items where you can easily get these Repair Parts.
View detail
Good price. Fast shipping. Perfec fitting, exactly what i need for my race GSX-R 750 with Brembo RCS19 master. Thanks Webike.
Good price. Fast shipping. Perfec fitting, exactly what i need for my race GSX-R 750 with Brembo RCS19 master. Thanks Webike. View detail
Purchase process is very smooth, easy to use web page, if you can accept credit cards even more Well, good fast sent, Thank You.
Purchase process is very smooth, easy to use web page, if you can accept credit cards even more Well, good fast sent, Thank You. View detail
Fits: Others Radial brake master cylinder, Others RCSBrake master cylinder
I personally like KOHKEN.It is surely quite expensive, but still I'm using their mono-block caliper, clutch lever and disc.Of course, I had no problem installing this tank kit.I've read so many other comments about this product, but to tho
I personally like KOHKEN.
It is surely quite expensive, but still I'm using their mono-block caliper, clutch lever and disc.
Of course, I had no problem installing this tank kit.
I've read so many other comments about this product, but to those who can install and adjust it upon understanding its characteristics, it is not a difficult product to handle.
View detail
Fits: Others Brembo 14-19RCSfor Master Cylinder
I was fat and was longing to wear leather pants. My wife said I could buy a pair if I loose weight. ( She didn't think I could.) So I went on a diet and reduced 15 kilograms in 5 months and finally got hold of them. I was impressed with TS TAICHI value. T
I was fat and was longing to wear leather pants. My wife said I could buy a pair if I loose weight. ( She didn't think I could.) So I went on a diet and reduced 15 kilograms in 5 months and finally got hold of them. I was impressed with TS TAICHI value. The texture, design and functions are awesome.
I am 178cm heigh and weigh 72kg waist size is 82cm and extra large fits me perfectly.
I'll have to be careful of rebound.
View detail
Fits: Others Radial brake master cylinder, Others RCSBrake master cylinder
08 GSX1300R HAYABUSAs were attached and used.It is OK perfectly.It was satisfactory only by cutting a little Hose.The Parenthesis of a Stay is black good.
08 GSX1300R HAYABUSAs were attached and used.It is OK perfectly.It was satisfactory only by cutting a little Hose.The Parenthesis of a Stay is black good. View detail
[Webike Monitor] Since the Tank which the moped had was damaged, it purchased as an exchange article. It excelled in the Cost performance, and was very good.
[Webike Monitor] Since the Tank which the
moped had was damaged, it purchased as an exchange article.
It excelled in the
Cost performance, and was very good.
View detail
[Webike Monitor] It is one of the parts required for the Brembo radial master. It was used for the Clutch side this time [ ]. Since it is called brembo original manufacturer's product, it can use in comfort.
[Webike Monitor] It is one of the parts required for the
Brembo radial master.
It was used for the Clutch side this time [
].
Since it is called
brembo original manufacturer's product, it can use in comfort.
View detail
Since the 30-ml former person's Tank had deteriorated yellow, it exchanged. ♪ with a Parenthesis simpler [ front ] than 30 ml and sufficient although 35 ml was used this time [ ]
Since the 30-ml former person's Tank had deteriorated yellow, it exchanged.
♪ with a Parenthesis simpler [ front ] than 30 ml and sufficient although 35 ml was used this time [
]
View detail
[a Webike Monitor] -- the Oil tank of attachment in different body Master cylinder -- appearance -- since it was too large, it exchanged for the Clutches of a brembo.it can take in and out also of the pure hole which is good touch shapely, and is sati
[a Webike Monitor] -- the Oil tank of attachment in
different body Master cylinder -- appearance -- since it was too large, it exchanged for the Clutches of a brembo.it can take in and out also of the pure hole which is good touch shapely, and is satisfactory -- it is .
View detail
The radial clutch master + antlion of a brembo. reserver tank stay Brembo racing Radial clutch master it is -- best fit! after a tank secures necessary quantity -- as much as possible -- a byway -- appearance -- good! since it is a clutch -- the same
The radial clutch master + antlion of a brembo.
reserver tank stay Brembo racing Radial clutch master it is -- best fit! after a tank secures necessary quantity -- as much as possible -- a byway -- appearance -- good! since it is a clutch -- the same tank as a brake -- something -- ~
View detail
It is a reservoir tank indispensable to a brembo radial master. Since a brembo differs in the size of an oil hose nipple from a nisshin, it also needs to arrange a tank with an original manufacturer's product. Although it is a brembo article, it i
It is a reservoir tank indispensable to a brembo radial master.
Since a brembo differs in the size of an oil hose nipple from a nisshin, it also needs to arrange a tank with an original manufacturer's product.
Although it is a brembo article, it is not necessarily expensive and is recommended.
Although the new article is sent, regular Schopp's way can also purchase a certain auction in comfort rather than he buys a genuine article or the thing which is not understood.
It goes into the bag of a brembo firmly as a picture, and is sent.
In the case of radial master purchase, let's purchase in accordance with a hose.
View detail