Reviews
Fits: HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125SF, HONDA MSX GROM
If you are five speed, you can install Speed ??sensor!
It is installed in Grom 's 181 cc full Custom.
Since Mission is five speeds of Mukawa river, Speed ??sensor is taken out from Rear.
In order to replace the Rear caliper, I searched on the site of Wei Big's site, and as a thing that can install the Speed ??sensor, I decided to Caliper support of the same Takekawa.
Caliper is Beringer 2p, it's a little bit small but Cut-out is wonderful, it is also a part I want to show.
This Megawa's Support is a type with Caliper on the upper side, so the presence of Beringer stands out better than the Type attached to the lower side.
Support making and texture are satisfied with Large at the highest Rank.
Instruction Manual As easy to install as street, feel like running Brake squeal etc etc. Nothing very Smooth and Brake has become effective as well.
I attach it to Screw of each part using Lock tite.
View detail
Fits: HONDA CB1300SF SP, HONDA CB1300ST, HONDA CB1300SB SP, HONDA CB1300SF, HONDA CB1300SB
You can also install it with bremboCasting.
CB 1300SB was installed in 2014 model. Casting is impossible in Manufacturer, but if Wheel was GALE SPEED type-R it could be installed. I do not know any other Wheel. Does OEM correspond to Spoke? ABS is also supported.
It will also make desorption of Rear wheel easier.
View detail
Fits: HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100 Type D, HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100 Type D
Brembo crab caliper for installation
Brembo caliper I bought it for installation.
The product itself is very accurate and complaining.
Pad needs to cut the outer circumference side, but it is more featuring Ring which is overwhelmingly more effective than the OEM's braking system.
I can not recommend amateur's installation because it is dangerous, but it is definitely a very good product.
View detail
I decided by the price
Caliper support for 320 mm disc has some choices, but for the 300 mm Disc of D TRAX X, I could only find this and K & T, so I chose this cheap price.
Although its shape is cool, it has almost no presence as it does not fit in the field of view.
But in combination with OEMCaliper there is no dissatisfaction because only Support will float outstandingly.
Accuracy is also good, more than one year after purchase, but there is not particularly trouble.
Those who are considering disc diversion of D tiger X are recommended because it is somewhat cheaper to buy this and disc separately than those sold in Kit.
View detail
Fits: YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03
It is a product as expected
【What made you decide the purchase?】
Because it was an indispensable item in mounting bremboCaliper.
【How was it actually used?】
quality - There is no complaint at all with accuracy.
【Was it difficult to install? (Hard parts case)】
Since the Instruction Manual is easy to understand, if you are a person touching the underbody, I think that you can work without difficulty.
【Please tell me the point of installation and hang (in the case of Hard parts)】
As mentioned above, since the Instruction Manual is easy to understand, there is no such thing as hang.
However, since Caliper is an important security part, Torque management is better done
I think whether it is good..
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
Because of hard parts, no particular.
[Is there anything I was disappointed about?]
Expectation is not Gap, but I actually have it, I have some impressions.
Just like me, "Brembobrembo : RearBrake Caliper P2 34 84mm "When trying to install this product in combination, there is a part that Brake Pads does not contact with disc. (It is Pad pin side)
It's written in Over Racing's Instruction Manual neatly but it is worth noting because it is better to shave off parts that do not touch disc.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I am satisfied with the quality very well, but the price is 3 times as much as the Front, so I was a little puzzled.
In fact, if you look at the hand, it is possible to do it unfortunately, but I feel that it is still a bit expensive.
【Have you compared items?】
AGRAS
[Others]
nothing special.
View detail
Fits: YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R25
It is a product as expected
【What made you decide the purchase?】
Because it was an indispensable item when wearing bremboCaliper.
【How was it actually used?】
quality - There is no complaint at all with accuracy.
【Was it difficult to install? (Hard parts case)】
Since the Instruction Manual is easy to understand, if you are a person touching the underbody, I think that you can work without difficulty.
【Please tell me the point of installation and hang (in the case of Hard parts)】
As mentioned above, since the Instruction Manual is easy to understand, there is no such thing as hang.
However, since Caliper is an important security part, Torque management is better done
I think whether it is good..
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
Because of hard parts, no particular.
[Is there anything I was disappointed about?]
Expectation is not Gap, but I actually have it, I have some impressions.
Although there are personal impressions, if you select Black in color shade, Bolt is Silver, so it will feel a little floating.
Also, since it is a part that supports Caliper, which is an important security part, the Screw stop will inevitably become a relatively high Torque.
Because it is an Anodized processing, scratching will go, so if you do not like it, I think that it should be protected with SiliconWasher etc..
【Hope for Manufacturer - Please let me know if you have any improvement points]
As mentioned above, I think Black product should be attached with Black Bolt.
Bolt is stopped at 4 places so Silver color Bolt asserts too much and it's coolness
I felt like I had killed him..
【Have you compared items?】
AGRAS
Active
[Others]
nothing special.
View detail
Fits: HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125
I really liked the manufacture of the detail. The quality is excellent .. Immediately look for the bolts for fastening the caliper to the adapter m10 And also. Buy the bolt for fastening the brake fitting to the caliper. And change the master cylinder
I really liked the manufacture of the detail. The quality is excellent .. Immediately look for the bolts for fastening the caliper to the adapter m10 And also. Buy the bolt for fastening the brake fitting to the caliper. And change the master cylinder I have from Kawasaki zx10 (2012) View detail
Attached to CB 1300 SF 2012 formula
It is the best in terms of performance and appearance
It was up to the year 09 year
I was able to install it in 2012 formula
It seemed that the basic has not changed
It was good to purchase.
View detail
Center batch launched
Even though I had not minded so much until now, trying to sky Tire at the time of Front up without any mind badly turns my friends.
So buy this item for trial.
Quantity on Right Side : 1pc. How to turn around lightly...
I regret that I should have used it sooner.
The sharp sound I was doing at the time of traveling also disappeared, and I was wondering if I was rubbing after all.
Because I have 8 pieces, I think that it is a bargain one point because there is plenty of reserve for when there is something.
Rotor, Caliper I think that I have it when I exchange it and there is no loss.
View detail
Fits: KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZR-7S, KAWASAKI ZR-7, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400χ, KAWASAKI ZEPHYR400, KAWASAKI GPZ1100, KAWASAKI Z750
By purchasing Brembo caliper
I bought it to convert Front caliper to brembo.
Brembo can not be installed without this support.
Yahoo! Auction etc. However, although Black has not come out so easily. Brembo has everyone Control.
View detail
Fits: KAWASAKI ZZR400, KAWASAKI ZZR1100C, KAWASAKI ZXR750R, KAWASAKI ZXR750, KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZEPHYR400X, KAWASAKI ZEPHYR1100, KAWASAKI GPZ900R
Simple is good..
As Rotor's Large formatting, Support is also exchanged. Since I was cheap at Sale, I purchased only Support before purchasing Rotor.
Active's for BremboCaliper support was also used at Normal rotor, so I could buy it without any anxiety.
I am also solid making and Cool is Simple in appearance.
View detail
A fantastic bit of kit, exquisitly manufacturered its almost a work of art. Use it to attach Brembo monoblocks to your ohlins rwu forks under the gold moon of ohlins lol.
A fantastic bit of kit, exquisitly manufacturered its almost a work of art. Use it to attach Brembo monoblocks to your ohlins rwu forks under the gold moon of ohlins lol. View detail
Fits: KAWASAKI Ninja250, KAWASAKI Ninja250SL, KAWASAKI Z250, KAWASAKI Z250, KAWASAKI Ninja400, KAWASAKI Ninja250R, KAWASAKI Ninja250
As expected ACTIVE!
I made Disc Lock 35 mm Meter semiFloating so it is Caliper support for semiFloating. Designed to match brembo Offset. Shim for fine adjustment was also included, but it was perfect without using Shim. As expected it is like ACTIVE.
View detail
GCraft Front caliper support
Purchased to make Front brembo. Of course it is a domestically safe so we can install it without processing, so it's a bit expensive but I think that it was good to pick G-crane. View detail
GCraft Caliper support
Purchase to install Brembo caliper. Selected domestic GCraft which can be trusted because it is a suspension part. Construction is also beautiful and can be installed securely. View detail
I was praised by a certain bulletin board
Brembo 4 POTCaliper required for installation and purchased.
When I exposed the image on a certain large Large anonymous bulletin board, I got an opinion that Mounting Bolt is beautiful.
I was happy.
The atmosphere was natural, I think it was a good choice.
View detail
Fits: HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100 Type D, HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100 Type D
It is good to have Bolt
If it is a product only with Support, you have to buy Bolt, but OEM is troublesome and you can not put your life on Bolt of Home center around there.
It is also troublesome to go to purchase a strong Bolt at the Bolt store
If you bundle it from the beginning I think whether it will take time and effort.
It is for NS-1, NSR 50, but it is attached to NS 50 F. Since it interferes with Fork, a part of Support has been deleted.
View detail
Fits: KAWASAKI ZRX1200 DAEG
Caliper support
Exchange with Brembo caliper installation.
BlackLIMITED so Front fork is Black so Caliper support also selects Black. It became the commodity here inevitably. I think that it is good to have a sense of unity with the car body.
View detail
Fits: KAWASAKI Ninja250, KAWASAKI Ninja250SL, KAWASAKI Z250, KAWASAKI Z250, KAWASAKI Ninja400, KAWASAKI Ninja250R, KAWASAKI Ninja250
For installing Brembo caliper and Floating Disc
It is an essential item to combine Floating Disc with Brembo caliper. It is a Parts on Brake so it is a place you want to avoid cheap and poor things, but if you compare it with the price of Caliper it feels a bit high. View detail
It is a non-conforming choice...
It is not for use with compatible models NSFFork, brembo New Crab, but I used it for NSR 80 Fork at Beringer 2 POT.
It seems like a thin Gray-like color of Hard anodized aluminum feels calm.
It can be used with no problems with 220 mm Rotor.
For diversion MONKEYetc. If it is used for, there is a possibility that the center of Caliper may be needed by Washer, Color etc. depending on the hub to be used.
When diverted, use outside the conformity etc etc etc. There may also be combinations that can not be used in, so be careful.
View detail