Reviews
Excellent Quality and Best Upgrade!
Product quality and finishing is excellent, although the alumninum nuts are slightly soft and can be damaged easily when tightened. Immediately and greatly improves the braking power using the stock brake pump and calipers. View detail
Excellent Quality and Important Upgrade
Product quality and finishing is excellent, although the alumninum nuts are slightly soft and can be damaged easily when tightened. Immediately and greatly improves the braking power using the stock brake pump and calipers. It's slightly longer that stock and needs to be looped to prevent it from swaying around. Mine is slightly touching the caliper and needs some protection. View detail
neat and tidy
The brake hose became thinner and refreshed. The Brake may have started to work slightly earlier. Is it my imagination? View detail
Fits: HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA CB750, HONDA CB750, YAMAHA MT03, YAMAHA MT-25, HONDA MAGNA50
Inexpensive stainless steel mesh hose
[How is it used?
YamahaXJR400R (RH02J) I purchased this product for the Front brake of the
I bought this D Type 800 and 850mm from DAYTONA's compatibility chart.
Was the one you received as per Image?
Photo
At best, they are unobtrusive; at worst, they are plain-looking.
Was the installation difficult?
In the case of XJR, it is easy to install by simply removing the Wire Guide.
The brake fluid needs to be bled, but since there is no ABS, it is not particularly complicated.
How was your experience with it?
Both MASTER and Caliper are still OEM, so I can't say whether they have improved or not.
I have no complaints about Brake's Touch, so I am satisfied with it.
However, I bought it after seeing the fit, but the Left Side is longer as shown in the picture, so honestly, I think both should have been 800mm.
[Included Parts:were they on?
Brake hose only.
Naturally, Copper Washer and Brake fluid will need to be new.
[Was there anything that disappointed you?
Not particularly
【Review】
Pre-installed banjo and stainless mesh hose with good cost performance.
It is a good product for those who do not want too much custom feeling because of its few colors.
View detail
![Vehicle Exclusive Front Brake Hose [HBF2576]](https://img.webike-cdn.net/catalogue/images/52568/FPS03_K0001_TS.jpg)
HEL Front brake hose
I have been interested in this product for a long time, and this was the first time I tried it.
First, the hose itself is very soft, allowing for flexibility in the hose arrangement, and finally, by adjusting the banjo, the twist in the hose after the arrangement can be corrected.
Stainless hose has been used in the past, but the task of correcting the hose twists caused by the HorseArrangement has always been a problem, so it has made the task very easy and enjoyable.
As for the feeling of use, I don't feel any difference between the other Stainless hose and the Large hose, but the Banjo bolt also comes with Stainless Steel, which shows the manufacturer's thinking in the parts. I would like to evaluate the durability in the future and continue to use it if it is good.
View detail
Touch changes
Fluid disposal and air bleed is a hassle, so we asked Shop to replace it.
The replacement with Stainless mesh hose is standard, although it does not increase absolute braking power,
Compared to Rubber, Stainless Mesh has a near linear effect on Lever and Pedal inputs.
It is not completely upwardly compatible, so you can choose according to Touch's preference.
As a product, the Hose is black, so at a glance it does not look like a replacement,
Banjo bolt can be changed to any color you like, so it would be good for appearance customization.
View detail
I like the mesh hose.
I have not put on other products, but I think this Hose is accurate and easy to put on. I have almost no complaints about the performance, but I think the Touch is too soft, although I am not sure if it is because of the Caliper from brembo. View detail
All black looks tighter!
[How is it used?
I used it on my XJR1300C. Handlebar is DAYTONA RCM with antlion Handlebar Post.
The Handle position is lower and narrower than NORMAL.
Was the one you received as per Image?
The stainless black color looks tight and fits the atmosphere of the vehicle.
Was the installation difficult?
It is not difficult if you can bleed air.
How was your experience with it?
It originally came with Stainless from the Swage line, so the performance aspect is honestly no different.
Touch is also unchanged.
However, the Fitting section is now much SMART and looks better.
[Included Parts:were they on?
See second image.
[Was there anything that disappointed you?
I think the T2Type is a little bit messy in terms of the parts to be branched from MASTER.
I would like to see a 2WaySeparator (sold separately) as standard equipment.
View detail
Fits: YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X, YAMAHA CYGNUS X
tightly
Necessary and sufficient compatibility with Brembo caliper No problem with installation View detail
Note for Brembo
There are two types of lineup for Brembo, one is for Normal cylinder and the other is for Master Cylinder of brembo, so it is recommended to order by looking at the product photo and Instruction Manual carefully. I made a mistake once, but I realized it right away and was able to cancel the order. View detail
![[SWAGELINE x Westpower] Rear Brake Hose Set](https://img.webike-cdn.net/catalogue/images/86079/DSC5876-1_TS.jpg)
Fits: SUZUKI GSX-R125, SUZUKI GSX-S125
We hope that GSX-R125User on the Circuit will find it useful!
The length is just right, the angle of the banjo bolt is just right, the finish is beautiful, and the product is impeccable. I was able to use it with external Rear Sets (SUPER NOW EngineerRing) without any problems. View detail
![[SWAGELINE x Westpower] Front Brake Hose Set](https://img.webike-cdn.net/catalogue/images/86079/DSC5882_TS.jpg)
We hope that GSX-R125User on the Circuit will find it useful!
It's only an exclusive product, not too long and not too short ( Dedicated (Even if a product claims to be "good", there are surprisingly some products that are too short or too long. The finish is good and looks GOOD.
If you are considering the removal of ABSUnit, I think it is safe to say that this product is the only choice for ease of installation.
View detail
Installation is Larger than key owed, but odd
The replacement of the ABS with the ABS in place was more difficult than I had expected. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Satisfied
I bought this to change from OEM to brembo.
Everything you need is included.
Only the angled banjo adapter needs to be repurchased.
I would be Large satisfied if I could select and purchase the angle of the banjo adapter.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
No mistake:??
I bought this to change from OEM to brembo.
Everything you need is included.
Only the angled banjo adapter needs to be repurchased.
I would be Large satisfied if I could select and purchase the angle of the banjo adapter.
View detail
Fits: YAMAHA TT250R, YAMAHA TT250R RAID
There is a difference between the product image and the actual product.
In the image, it looks like there is no Nylon Slider for off-road vehicles, but the actual product has a NylonSlider just like the OEM one. This is unexpected in a good way. The tightening part of the hose and banjo is not tightened, which I think is for the purpose of securing the freedom of installation. So, don't forget to adjust the angle and tighten it after installation. I am satisfied with the product itself, which is tightly Touch and Large. View detail
Fits: KAWASAKI ZRX400II, KAWASAKI ZRX400
Used for ZrX400 early period
[How is it used? Rear master cylinder replaced during O.H.
Was the one you received as per Image? It was very good
Was the installation difficult? No problem.
How was your experience with it? I am satisfied
[Included Parts:were they on? Yes
[Was there anything that disappointed you? None
Very good product and I can recommend it.
View detail
Large satisfaction with Custom look
At the same time, Brake Pads were replaced with Sinterd Pad from OEM.
I don't know about the effect as Brake hoseSingle Body.
I am satisfied with Large because it looks cool.
View detail
จัดส่งรวดเร็วไวมากๆสินค้าถูกต้องครบถ้วน View detail
Rear brake hose replacement
The brake fluid was replaced from OEM by Timing, which replaced the brake fluid as well as the front, and the touch of the brake went from soft to firm, and the brake performance improved. View detail