Reviews
Fits: YAMAHA MT-09, YAMAHA MT-09 ABS
Better made than I expected.
Purchased from WeBig.
It was an order item but arrived earlier than originally scheduled.
ProtectorBody is Quantity:Pair (for Left and Right) If you don't make a mistake, you will get it right because there is a difference between the two.
However, the PenetratingShaft is Stainless Steel, but the Washer and Lock nut are Steel.:Stainless Steel was purchased separately.
View detail
Large Variety Satisfaction
It was shipped from overseas and was delivered 1.5 months earlier than the scheduled date.
The packaging was well packed with cushioning material and was very careful.
Thank you very much.
It is surprisingly heavy, but since it is steel, I think that's about it.
Motorcycle will be installed after delivery.
I am looking forward to seeing the cosmetic fit.
If I find something better, I would like to buy it again.
View detail
I will not buy it again
The Bolt that came with it was shoddy and broke during installation.
not worth talking about at all
View detail
Maybe it needs a little tweaking.
It depends on the type of car and the manufacturer. In my case, both engine bolts in Included Parts:were Nut, so I was worried about Torque, so I welded one of them to be Bolt&Nut like OEM and made it into Engine bolt. That is all. View detail
Lowest
The length of the bolt in the Included Parts:section is not correct and cannot be installed as it is. This may be the case with parts made overseas and installed on a foreign car, but we are honestly disappointed with the condition of the parts despite the long time it took to receive them. View detail
Also comes with SV650S
I installed this bolt on a 2005 SV650S. the bolt on the Right Side was not long enough, so I prepared a separate M10×140 fine cap bolt. (Would 1,000 be enough?) The construction is good and Parenthesis is good. It seems to be strong enough to prevent standing up and falling. I would have preferred to use a torque wrench for installation, but the bolt head was too deep and there was no extension, so I tightened it by hand. The price is a little expensive, but I think it is not too expensive because it is more elaborate than just a lump of DURACON. View detail
Good cost performance and one point color options
Good product at a relatively low price.
It is an overseas product, so the delivery time is about one month? It takes time.
For installation, the Nut inside the DURACON must be
Clearance is narrow, so 13 deep sockets are Quantity:2pc. Set required.
View detail
![RearShaft protector[Rear axis protectors]](https://global.webike-cdn.net/photo/impression/31/31c8dcdd6574680a594e5e3e7f80cd4cL.jpg)
Cost performanceGood
Good product at a relatively low price.
It is an overseas product, so the delivery time is about one month? It takes time.
I received a different Size to begin with, but they replaced it properly.
For installation, the Nut inside the DURACON must be
Clearance is narrow, so 13 deep sockets are Quantity:2pc. Set required.
View detail
The Frame is subtle, long, and poorly made.
The length of the Frame is too appropriate. The actual product is quite small. View detail
The dimensions don't match at all.
I bought this for the rear, but the shaft is not long enough to fit the guard. I'm not sure. View detail
I wasn't on the rear.
The front was attached by another manufacturer, but the rear was not attached, and I installed it so that the Swing Arm would not die when I fell.
The installation itself is simple with the ScrewShaft and Nut tightened from both sides.
If I wanted to, it would be easier to thread the hollow shaft and bolt it in place.
I also added it and the Maintenance Stand is now harder to use:。。。。
View detail
![Rear Shaft Protectors 【Rear Axis Protectors]](https://global.webike-cdn.net/uiu/impression/202110/13_1018910_6166f1c7a138b.jpg)
Cost-effective choice
The first time you buy this brand, the price is more favorable than other brands. The style and performance are good. There are many colors to choose from, which can be matched with different colors. Please note that you need to bring your own hex key and a pair of socket wrenches when installing. Twist both sides at the same time.
The overall packaging of the goods is good, and there is anti-collision material filling protection in the logistics box. -------------------------------------------------- -------- For the first time, buy this brand, the price is more than other brand discounts, style and meticulous colors, can meet different color body with match, please pay attention to the installation before buying, you need to bring your own hexagle and a pair of sleeve panels. 2 is twisted at the same time.
The cargo pack is overall, and there is a collision material filling in the logistics box.
View detail
![Front Shaft Protectors [Front Axis Protectors]](https://global.webike-cdn.net/uiu/impression/202110/13_1018911_6166f2a07bcbe.jpg)
Cost-effective choice
The first time you buy this brand, the price is more favorable than other brands. The style and performance are good. There are many colors to choose from, which can be matched with different colors. Please note that you need to bring your own hex key and a pair of socket wrenches when installing. Twist both sides at the same time.
The overall packaging of the goods is good, and there is anti-collision material filling protection in the logistics box. -------------------------------------------------- -------- For the first time, buy this brand, the price is more than other brand discounts, style and meticulous colors, can meet different color body with match, please pay attention to the installation before buying, you need to bring your own hexagle and a pair of sleeve panels. 2 is twisted at the same time.
The cargo pack is overall, and there is a collision material filling in the logistics box.
View detail
![Crash protector[Crash protectors]](https://img.webike-cdn.net/catalogue/images/41365/K44-PH01_pict_1492695008233527_web_TS.jpg)
NINJA650 2020 MODEL
I was able to install it on my NINJA650 2020 MODEL. View detail
Fits: YAMAHA MT-07
Is it such a thing?
The large size of the Guard on the Right Side of the vehicle does not match the diameter of the Outer tube at the insertion point.
It's a lousy design mistake.
As you tighten the Nut, it will become slanted.
I thought about shaving it off and fixing it, but it got too cumbersome in the middle of doing it, so I just installed it at an angle.
Probably won't bother anyone but the Owner, though.
I may scrape it off and reattach it in the future if it bothers me.
View detail
It was worth the wait.
I considered givi and sw-motech, but this one was the best pin and I bought it.
Originally scheduled to arrive in early December, but arrived a month early and we're happy!
The installation was done by looking at the Instruction Manual that came with it because I couldn't find it on the Net.
The bracket under the Radiator was installed in the wrong direction.
I'd give it four stars for protection, but I'd have to mock it up to find out;
View detail
It's well made.
I bought this because I wanted a solid Engine Guard.
I like it because it doesn't feel uncomfortable like an OEM Product.
Installation was not difficult.
View detail
A bit of a disappointing product…
Slider's bracket has screws on both sides, so it's hard to screw it in evenly. Also, there was only one Cover for Nut in the box. Because I avoided the hot season, I gave up and installed it as it was because two months had passed since I bought it. It was cheap but a little disappointing… (>_<) View detail
It is easy to install.。
I installed it in case of a fall from standing. It is a good and inexpensive product. View detail
RearShaft protector
Bought this for my 2021model PC40. It looks good and I am satisfied.
An ultra-thin 13mm long socket is required for installation.
View detail