Reviews
Fits: BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Pure, BMW RnineT, BMW RnineT /5
It would be unstable.
I can't flatten myself on the ground. View detail
I'm not sure the cosmetics are good.
The construction was not good. It is not that bad, but if you are not careful about tightening with PeLePera, it may be deformed during installation. Product Name TRACK DAY." The Image may be used as a lid when Mirror is removed in Circuit, rather than for daily use as in the following example. View detail
Good windbreak...
It is R1200RT LC which has a high windproof effect, but I bought it because it is cold only in the arm when the wind hits only the upper arm in winter.
I think I have prevented 70-80% of the wind exposure after installation and I am happy with this.
However, it is also a product whose bad points stand out in private.
The first is that the Navigation screen in the OEM position is an eyesore at night and in the Tunnel.
The Portable navigator is installed in the OEM position.
The second is the rectification effect, which reaffirms that OEM stability is great.
The third is the curvature of the view, due to its shape. (This is tolerable)
Each individual feels differently, so that was my personal opinion.
View detail
Position options?
The product itself is well textured and solid, but
It only allows for half-hearted position selection, which is common in these Rear Sets.
If you change the setting one step, the footpeg position will move to Large, so you can only choose one option at the end.
I went back to Babyface's Rear Sets because they don't quite match the adjustment range of the NORMAL Pedal, so I went back to Babyface's Rear Sets.
The footpeg itself was too hugeLarge and was one of the worst to use. If anyone is considering buying one.
At the very least, it might still be better if they made it into a 23mm Plate!
View detail
I bought it and lost it
I applied Locktite and installed it, but after just a few tours, I was able to get three of them Quantity:2pc. Set is gone Now, the Bolt is a replacement for Spikes Should I have made it a long Bolt from the beginning? View detail
It's soft and doesn't get tired
I was worried that it was defeated by Impression and installed it, but by applying detergent
I was able to install it easily The vibration is not transmitted easily and I am satisfied with it
It's a little bit more expensive and has a large scoop diameter
View detail
Fits: BMW R1200GS LC, BMW R1200GS LC, BMW K1600GT, BMW K1600GT, BMW K1600B, BMW K1600B, BMW S1000XR, BMW R1250RT, BMW R1250RT, BMW K1600GT, BMW R1250GS Adventure, BMW R1250GS, BMW R1200RT LC, BMW R1200GS LC Adventure, BMW K1600 Grand America
It is easy to install Just that
The first touring after the installation of this vehicle. stop& in the city and go to the highway repeatedly As I drove comfortably down the highway, I was suddenly reminded of this "Hey, didn't I turn down the Seat? I haven't changed a bit Here's what it looks like
It's pricey and not very cosmetic
View detail
You'll have to be careful about the angle of the mounting.
When it falls over, if the installation angle is not exactly right, it will rotate and eventually the Guard The damage to the Engine was prevented, but the Engine was slightly damaged There is no point in scarring them View detail
It is not usable
I bought it in the early spring, but the time of use was delayed due to some mounting parts missing etc I drove it on the highway and it was not very drivable due to the turbulence it created Also, I found out later that the design was completely different from the design shown in the pictures (No VCut at the top, etc.) We have received a product in shape View detail
Fits: BMW R1250RT, BMW R1250GS, BMW R1250GS Adventure, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Adventure water-cooled
I wonder if it's too high
I installed it in the 13 year model R1200 GS.
The first thing I thought about opening it is scratches all over. is.
Quantity : 1 Set 17000 yen and never being cheap This quality is the worst. Is this overseas made like this?
Although I felt like I installed it, the accuracy was solid, but I do not know what is wrong at the time of designing, but the other side did not match one side.
Many people riding GS seem to feel Handlebar far, so I think that many people bought this product.
I think there are individual differences, I think if Quality would lower the price a bit more.
Those who buy from now are recommended to buy it by dividing it into overseas products.
Posture is much easier after installation.
View detail
Fits: BMW R1250RS, BMW R1250R, BMW R1200RS LC water-cooled, BMW R1200R LC water-cooled
Is there a problem with Size?
I bought it to improve the Riding position of R1200R
It's a bit pricey, but it was with Exclusive Design
There is a sense that it can not be helped.
Although the texture of Parts is very good and not directly touchable part
The appearance is also wonderful.
However, in the fitting with the essential Handlebar
There is a gap of Large texture, is it really a vehicle type Exclusive Design?
I doubt it.. There is a gap of about 2 mm
This is Spec. Is it the street?
Sorry indeed!
I want to believe that there is no problem in practical use
View detail
It is too thick!
Maybe it depends on the type of car, but the geta was too expensive for our vehicles.
It is indeed the primary objective of this Items "It is not buried in Left Side" Has been achieved, but if you mount and stand on Asphalt or Concrete, the Motorcycle stays upright as it falls to Right even if the wind blows.
I was disgusted by searching for earth and grass on the road and stopping it..
View detail
It is long than expected! When putting in the Plug of the Option attached to the Front of R1200GS, the code of GPS became obstructive and a Handle did not go out. Although assumption is differed from reluctantly, it is used with the Plug under the sheet o
It is long than expected! When putting in the Plug of the Option attached to the Front of R1200GS, the code of GPS became obstructive and a Handle did not go out. Although assumption is differed from reluctantly, it is used with the Plug under the sheet of a standard position. Let's buy it after surveying. View detail