Reviews
Fits: HONDA APE50, HONDA APE100, HONDA BROS, HONDA CB-1, HONDA CB1000SF, HONDA CB1100, HONDA CB250T, HONDA CB400SF, HONDA CB400SS, HONDA CB500FOUR, HONDA CB750, HONDA CB125, HONDA CB125T, HONDA FTR223, HONDA GB250, HONDA HORNET, HONDA JADE, HONDA SL230, HONDA SPADA, HONDA VRX400
fully functional
I put on the Bikini cowl in the middle of winter and was hooked on the rectification.
When it got warmer and I took it off, it couldn't withstand the wind resistance.
Simple Type that does not spoil the Style is installed on a trial basis.
It is more effective than I thought, Bigli!
I'm satisfied
View detail
Fits: SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman
Smoke Screen, a little better Parenthesis?
For the price, I think it is good.
The formation is inferior to OEM, but the GrommetScrew feels like a Limit stop and interfered a little with Cowl's Cover, so it was shaved off.
Up close. The molding is wavy at the mall, but this is still better as the OEM was dirty from the UV rays.
View detail
Fits: HONDA DIO DIO AF35, HONDA DIO DIO AF34
Exhaust System for AF34/35 with the best cost performance
2stExhaust System is a product that wears out faster than expected. "2000 AF34 71CC bore up version." Although we are using this one for the
This is the third time I have purchased this iNet Exhaust System, and it is a great match. The exhaust sound is quieter than the OEM product, the exhaust pressure is good, and when the Torque is applied, it really extends well. By the way, Intake is self-improved from NORMAL by 71CC bore up, and it marks 84km/h on flat road, 78km/h up road, and 94km/h down road by using Eye Net Exhaust System.
Of course, it is not only the performance of the Exhaust System, but it is a product that can demonstrate sufficient Potential compared to other companies' products.
Moreover, the cost performance is the best, and we can't use a bad, expensive Chamber, because it is a consumable product. Therefore, I Net products are the best in terms of cost performance, so I have decided to replace the exhaust system.
It's really helpful because I can replace it without hesitation. 。 We intend to use it in the future.
The following are some of the improvements that could be made in terms of design.
(1) Stainless Steel decorative winding is not necessary (it's contrary and tacky), Black or Color.:One solid coat of Gray is fine.
As a decoration of Exhaust System ai net I think it would be cool if there was a heat-resistant PlateLogo.
I hope you will go ahead with branding because the product is good.
View detail
Fits: YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-10, YAMAHA MT-03, YAMAHA MT-125
Rose variation in quality is expected.
Mounting BoltMirror Bracket has been hammered in, but it is not completely hammered in, and even when the nut is tightened, about 1mm of bolt is visible on the top of the nut, which is not good looking.
Rose variation in quality is expected.
I would like to return it, but I have opened and installed it and it is Garbage.
View detail
Fits: KAWASAKI W650, KAWASAKI ZRX400II, KAWASAKI ZR-7/S, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR400, KAWASAKI BALIUS, KAWASAKI BALIUS2
Will not pass inspection.
After installing this Headlight, I went to testCenter to adjust the optical axis.
Two irradiated points, one with a huddled area and the other with a blurry area.
I was told that I could not inspect the car.
View detail
Fits: SUZUKI Address V100, SUZUKI ADDRESS V100
ai-net Secondary Air Pipe available Spec. OEM Type Exhaust System
Replacing the OEM made it lighter and sounded more like a 2-stroke.
We are not sure how long OEMChamber will last, and we have a motive to purchase it while we can.
Performance-wise, it is not that different from the OEM, but I am satisfied with the lighter weight and the more Chamber-like appearance.
The fixing bolt holes were correctly positioned with no gaps, and there is a secondary air pipe for the Second Type Model CE13A, so installation was no problem.
The fact that Gasket is included is also appreciated in a humble way.
View detail
![Fender Eliminator Kit [with Plating Grab Bar]](https://img.webike-cdn.net/catalogue/19270/10241940_5268f90d55496_TS.jpg)
Everything you need
This is everything you need for a tail light on the monkey z50j. Grab bar comes in handy when needing to move the bike around and the light is bright. View detail
Convenient
[How is it used?
Rear boxB27N was attached and used.
There are no functional problems at all.
Was the one you received as per Image?
As per Image
I also liked that the length of the bike made the impression of a motorcycle a little more "large".
Was the installation difficult?
I was able to install and use it myself at the same time I purchased the VTR. It is not difficult at all.
Attaching the GIVIMonokey base is also no problem.
How was your experience with it?
I use it with a box, but it is also convenient for loading without a box.
It is the same height as the Seat, not tiered, and the Carrier is long enough to pack a lot.
[Included Parts:were they on?
Collars (thicker Washers) are included and are interchangeable with OEM collars.
[Was there anything that disappointed you?
There is a Tandem grip part, but it is thin and difficult to hold.
Paint film tends to peel off easily (especially at Bolt attachment points).
It is disappointing to see rust progressing from where the paint has peeled off.
[Opinions and requests to Manufacturer
I would like the Tube in the Tandem grip section to be thicker.
I would like to see the painting improved.
View detail
They run away in the middle of the night.
About once a month, a gang of thieves comes in, sets off an alarm, and runs away. View detail
Fits: HONDA NC750X, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA CBR250R (MC17/19), HONDA CBR1000RR, HONDA CBR250RR (MC22), HONDA CB1000 SF (Big One), HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB400SUPER BOLDOR, HONDA NC750S, HONDA CB400SUPER BOLDOR, HONDA CBR600RR, HONDA CBR600F, HONDA CBR600F, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR1000F
No different from OEM Product
Until the actual product arrived, I was worried about what it would look like, but I was relieved.
Although there are some rough processing parts, the price is lower than OEM products.
It will hardly make any difference, and I don't think you will notice that it has been replaced.
View detail
Rose sales are helpful.
As the Title says, Rose selling is good, and it really helped me to choose the Ampere I wanted.
Netetc. sales, I was able to buy only the Ampere I needed for my Motorcycle this time, and the Ampere I didn't need was only cheap in Large quantity.
View detail
It is soft.
It is quite soft and I used it for serving bean jam, but when I sat on it, it was crushed and did not make the seat height UP. View detail
Fits: SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle)
Is it not higher performance than OEM Product?
I love my 2-stroke carburetor scooter, and I clean it every 10,000 km with a pipe fnish because clogging of the exhaust system is inevitable. But I replaced the exhaust system because it was reaching the end of its service life. The Exhaust System in question is Quantity:The design of the exhaust guard has been changed for a better look. The installation is perfect with no gap at all at the bolt holes. View detail
Fits: KAWASAKI KLX150, KAWASAKI KL250, HONDA XR250, HONDA XR200, HONDA XLX250, Others , SCORPA T-RIDE 250F, YAMAHA CT175, SUZUKI SX200, KAWASAKI 250TR Bison, HONDA XLR200, HONDA MTX200R/RII, HONDA CRF150R, HONDA CRM250AR, HONDA SL230, HONDA FMX650, HONDA CRM250R, HONDA XLR250, HONDA XL-DEGREE, HONDA XR230
The pattern is cool, but …
[How is it used?
Seat was torn and I bought it as a Replace.
Was the one you received as per Image?
The Pattern was cool, WaterproofSeat was included, and I was happy with it when it arrived.
Was the installation difficult?
Installation, but due to Seat's material, it could not be installed without stretching and wrinkling.
You can attach Wrinkle by blinding it.
How was your experience with it?
Since it is used for off-road driving, it has Wrinkle and no Grip, so I gave up using it.
However, it looks Parenthesis good.
[Included Parts:were they on?
It comes with a WaterproofSeat, which is used in conjunction with another Seat.
[Was there anything that disappointed you?
As I said, there was no growth, so that was disappointing.
View detail
Fits: BMW R nineT Scrambler, BMW R nineT Racer, BMW R nineT Pure, BMW R nineT
No durability of Double-sided Tape
It came off in three days.
Just Material:Rubber, so no fading …
View detail
![[Avis] Neodym Drain Bolt Honda/Yamaha/Suzuki/Kawasaki Vehicle](https://img.webike-cdn.net/catalogue/images/34041/61634or61640_001_TS.jpg)
Fits: HONDA CBX250, HONDA XLR250, KAWASAKI GPZ400, KAWASAKI GPZ400, SUZUKI GSX250FX, YAMAHA TT250R Raid, HONDA NSR80, HONDA NSR50, HONDA GORILLA, HONDA VTZ250, HONDA MAGNA, HONDA JAZZ, KAWASAKI ZRX1200, HONDA VTR250, HONDA MONKEY, KAWASAKI W650, KAWASAKI ZRX1100, KAWASAKI ZZR1200, KAWASAKI ZRX400, KAWASAKI ZXR750
Perfect
Too bad it is not visible because the Neodym drain bolt is perfectly finished. A very pretty piece of which we feel from the grip that it is a quality piece. -------------------------------------------------- -------- Too bad it is not visible evening because the Neodym drain bolt is perfectly finished. A very pretty room of which we feel from handling that it is a quality creeper. Powered by Google Translator View detail
Recommended
Easy to replace, cheap!
Recommended!
View detail
Fits: HONDA GORILLA, HONDA MONKEY
Recommended!
Purchased to fit 12-inches.
Well made, Caliper is the same as ksr, so you can change Caliper!
Stems were cut down to the largest size and lowered.
It was a little soft, so I changed the Oil!
View detail
It's working fine!
It is a product that I have a hard time evaluating soooo much, but … lol I bought it because I suddenly ran out of Fuse.
I replaced it! Naturally, it worked fine!
View detail
Fits: HONDA CB1100, HONDA CBR600F, HONDA CBR600RR, HONDA CB1100, HONDA HORNET600S, HONDA HORNET600, HONDA CBR954RRFire blade, HONDA CBR929RRFire blade, HONDA CBR900RRFire blade, HONDA CB400SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB1300 SF, HONDA VTR1000SP, HONDA VTR1000SP, HONDA CBR600F, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF
No problems at all. Good product!
I have not run the car yet, but I have not had any problems with the installation. View detail