Reviews
Extended length of Rear Fender
It is difficult to see the effect compared to the Front side.
The price is higher than Front.
I feel like it could have been done without.
As with the front, double-sided tape is not used, but only the clip is used for mounting.
View detail
Fits: YAMAHA Tracer 9 GT, YAMAHA Tracer 9
Bubbles disappeared.
It was quite full of air bubbles, but the bubbles disappeared within a week of leaving it. View detail
Fits: TRIUMPH Street Triple 675, TRIUMPH Daytona 675
I'm satisfied.
I was able to install it. How does it feel on a rainy day?
Also, to be honest, I didn't want to drill the holes with Drill, so I stuck it on at first with the adhesive tape that came with it, but still. Do you like the design or something?
View detail
SMART and well built
[How is it used?
In use in Touring
Was the one you received as per Image?
No different than the one in the picture.
Was the installation difficult?
Remove the Mirror, and remove the master Fluid on the Brake.
It is easy if you have the tools.
Do not tilt the Fluid when it is removed, and if you do, do not hold the Lever in that position.
How was your experience with it?
The design is not too large, so it does not give an "off-road" feel.
What I was looking for was a solution to the cold fingers of my hands in winter.
Insect Card in the summer.
These two points were beautifully defended.
In winter, the coldness of the fingers is reduced at once just by reducing the wind exposure.
Although bugs in the summer often hit and crush your hands when driving at high speeds,
It is hard to get dirty because it is protected by this Cover.
There is no effect on operability by attaching it.
[Included Parts:were they on?
Comes with a set of parts for installation.
[Was there anything that disappointed you?
Cheap looking; designability could be a little more elaborate.
I think it's because it has a material feel to it, maybe a Sticker or something would give it a little more atmosphere?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
If it is a Material roundup, why not make it a little less expensive? Or offer painted ones, etc.
View detail
Fits: BMW F750GS, BMW F850GS, BMW F850GS Adventure
Attached reinforcement parts are required!
It cracks easily if you don't use the included reinforcement parts, even though it costs 30,000 yen. View detail
Fits: HONDA CB1000R
Easy for everyone, not for everyone.
I'd probably buy this 3-Quantity.:4 Set
because Somehow I'm not satisfied with the finished product." From
What I mean is that, first of all, the design phase Film shape/effect after installation." The accuracy of the product as a "product" is satisfactory, but the manufacturing process Accuracy and quality as a final product." not very good
The manufacturing method is probably to stamp out the Seat with a die, but the fine BALI is left in a few places on the edges, so no matter how much you apply it to Beauty, those few places will float…MeterFilm is not a very strong product, so it is not strong enough to stick, so it will float a little bit. It's a little bit of floating, but it bothers me a lot, and once it floats, there's nothing I can do to hold it back.
As a solution, you can cut the straight edge of the Film by 0.1mm before applying it. (I had to buy several times for this reason, resulting in a huge surplus of Antiglare).
So (Okay, okay, you put it up well.) I was gently wiping the corners of the bag, and it caught a corner and floated away, and then I got a fine dust in it and said, …... "… You really are a …" something like that
Image of the product. Pi Turn!" But you should not expect perfection!
Of course, if the compromise point were lowered to the extreme, Large would be sturdy, but since it's always in sight, that's not going to happen in the end. (It's my fault.)
Maybe the finished product would be better if I made it myself using Free cut for PC….
View detail
Fits: BMW C400X, BMW S1000XR, BMW S1000R, BMW R1250RS, BMW R1250R, BMW R1250GS, BMW M1000RR, BMW M1000R, BMW F900XR, BMW F900R, BMW F850GS, BMW F750GS, BMW S1000RR, BMW S1000RR, BMW F900GS, BMW M1000XR, BMW R1300GS, BMW R1200GS, BMW F800GS
I think it's easy to apply.
The thick Film is easy to apply.
All we had to do was prepare the misting sprayer and we had all the rest we needed.
There are a few gaps, but I think it is a compromise.
I am satisfied with the quality and texture, but I gave it a 4 because there may be something better out there.
View detail
Fits: YAMAHA Tracer 9 GT, YAMAHA MT-09 SP, YAMAHA Tracer 9, YAMAHA MT-09, YAMAHA XSR900
That's all right.
I put it on and used it in the rain and there doesn't seem to be much difference between with and without it…. View detail
Exhaust System & Radiator guard substitute
Since it is almost a universal product, it doesn't fit to the car body exactly and there is a little extra width, so it is not a perfect fit and the color is different, so you may feel like you are wearing it, but it is not that noticeable, so I think it is bearable. I used double-sided tape with cushioning or pin to fix it, so this time I used double-sided tape and gory-fat tape that I bought separately to fix it on the inner surface.:Pair (for Left and Right) I think it is difficult to make it symmetrical, and I managed to fix it in a compromising position after struggling for more than 20 minutes. View detail
Fits: HONDA CB1000R
It is a pretty good product!
It's a product that buys peace of mind.
Instruction Manual is also very careful. It is recommended to apply it carefully in a place where there is no wind.
View detail
Fits: YAMAHA Tracer 9, YAMAHA Tracer 9 GT, YAMAHA XSR900
I am mostly satisfied!
It looked like I needed to drill holes to install it, so I asked the YSP store to do it for me.
Before installation, small stones (1-5mm) accumulated in the Swing Arm, but after installation, they hardly accumulated at all.
It has been installed for about half a month, so I don't know about durability.
View detail
Fits: DUCATI Panigale V4, DUCATI Streetfighter V4, DUCATI Diavel V4
Seal to protect the Meter screen.
Seal to protect the Meter.
It's like putting it on your phone.
Scratch protection, more secure with it than without it.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z650RS
PanelProtection film was applied prior to delivery.
I bought a new car at Kawasaki Plaza, so I was able to put it on on the day of delivery in an environment free of Garbage and dust in the store.
Kawasaki Plaza was also pleasant enough to take the time before explaining the delivery of the car, and I was able to attach it with a sense of calm and peace of mind.
I was able to paste it well.
Since the size is a little smaller, place the film on the panel in advance and check the gap size around the film in the panel.
Image and then paste with Just fit.
Since the patterned paper is included in the product bag, it can be applied beautifully by gently pressing down on air pockets and the like.
I pasted the Super clear (transparent) one, but it looks like it is still OEM with nothing pasted on it, and I didn't realize it was attached.
It is a beautiful finish that I can't believe. I would eventually like to purchase one from the same Manufacture when the Panels are damaged.
View detail
Fits: HUSQVARNA Norden 901, KTM 125 DUKE, KTM 1290 SUPER DUKE R, KTM 1390 SUPER DUKE R, KTM 390 DUKE, KTM 790 Adventure, KTM 890 Adventure R Rally, KTM 890 Adventure R, KTM 990 DUKE, KTM SMT 890
Almost satisfied
[Color] Clear and Glare? (Matte look) Quantity:1 Set of 2pc. for now. [Color] The size is also good, but the end face is a little floated or a little air is coming in. It doesn't bother me that much, so it's OK. View detail
Fits: HONDA NC750X
Dimensions are correct, but air bubbles remain on the edges.
Pasting was easy. The dimensions were correct and I was able to apply it without any large gaps. However, although it is inevitable due to the quality of the product, there were some air bubbles at the edges of the film. It is like pasting a cheap smartphone film. This is something that cannot be helped, so I will use it without worrying. View detail
Fits: YAMAHA XSR900, YAMAHA MT-09 SP, YAMAHA MT-09
Are all Manufacturers similar?
How was your experience with it?
It is no different than screen protection for cell phones.
It is not GlassFilm, just Film.
Contents include Super clear×1, Antiglare×1
Super clear was used this time.
On White's Table [Color] I'm putting Clear and Glare, although it's hard to see in the light.
The glare looks more Cream colored.
The purpose was to prevent scratches on the screen, so we didn't really want anything more than that.
I think it depends on the shape of the Motorcycle, but on my Motorcycle it was very difficult to stick.
It can be re-stretched many times, but the adhesion will inevitably weaken.
Thickness is very thin.
I guess it depends on the shape of the meter, but there were many areas that could not be covered because there was quite a distance to the edge.
Also, it is difficult to paste this again due to the split type.
I understand that it is hard to keep the price low because it is a Motorcycle product and it is not easy to produce a large number of them.
Still, this Gold amount seems high for this content.
However, the initial objective of not using scratches has been achieved.
This is the kind of thing, I think it is for people who just need to be prevented from scratching.
How did it compare to other products?
No comparison because we have not purchased any other company's products.
However, it seems that all products are the same and there is not that much difference in Large.
It may be a good idea to buy a cheap Large land-based product before you ruin it.
[Points to note]
Be careful about re-stitching. It is not impossible, but the edges will inevitably become worse.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
I'd like to see them lower the price and at least consider replacing it as a consumable item.
I want GlassFilm to be the same as the cell phone, easy to apply.
View detail
Fits: HONDA XL750 Transalp, HONDA X-ADV, HONDA FORZA 750, HONDA CB750 Hornet, HONDA CB1000R
protect my dashboard screen
My motorcycle is a HONDA X-ADV21 model. When using or cleaning the motorcycle, it is inevitable that the dashboard screen will be scratched. It is very expensive to replace this accessory, so I bought this P&A International dashboard protector. This is a protective film with high abrasion resistance and high transparency. It is easy to install and can be perfectly installed with a little care.
-------------------------------------------------- -------- My motorcycle is HONDA X-ADV21. It will inevitably scrape the instrument screen when using or cleaning the motorcycle. It is very expensive if this accessory is replaced, so I bought this P & A International instrument panel protection sticker. This is a protective film with high wear resistance and high transparency. The installation is very simple, and it can be installed perfectly by carefully. Powered by Google Translator
View detail
Fits: SUZUKI Katana, SUZUKI GSX-S950, SUZUKI GSX-S1000, SUZUKI GSX-R1000R L7
Construction is easy.
originally [Color] By applying the film, the clear screen will look like frosted glass.
It is my personal preference, but I thought it would be more Refreshing to cut out the Protection film from the phone.
View detail
Fits: Others
I put it on a 2018 R1200GS.
It was installed on a R1200GS TFTMeter MODEL.
It is usable without interfering anywhere in particular.
It is just plugged into Heller Socket, so it should be easy to use.
The Waterproof Cover was also included for convenience.
View detail
Fits: ROYAL ENFIELD Himalayan
I can't get rid of wrinkles.
The installation was carried out in accordance with the Instruction Manual.
Wrinkle could not be removed.
I thought it would go away with time.
I left it alone, but some of it remained.
Also, when you peel off the adhesive Cover.
It didn't peel off easily.
View detail