Reviews
Weight roller replacement
I used it to change the weight roller and it was my first time to do so, but it was done
However, I won't be using it for the time being
As a Sunday mechanic, this is good enough for me
View detail
It's an outside item
I used it to hold up a Pulley on a moped
Please note that this product is an external product
It cannot be pinched like a Stag beetle
No rattling etc. and high quality
View detail
It didn't work, but it's a good cosmetic
I bought it as a Pulley off of co-MAJESTY, but as I feared, the Pulley It couldn't be used because it interfered with the back face fin But it's just an universal product, so it's not the same as the Clutch area It is a good tool to have because it can be used for motorcycle View detail
Universal fixture
I purchased this device for locking the pulleys of a scooter (maxiscuter) when unscrewing the nuts on the variator and torcdriver axles. I'm happy with the purchase! It is a very useful tool for replacing the variator belt. I purchased this device for locking the pulleys of a scooter (maxiskuter) when unscrewing the nuts on the axles of the variator and the torc driver. Satisfied with the purchase! A very useful tool for replacing the variator belt. translated by Google Translator View detail
MINIMOTO Universal Holder
MINIMOTO Universal Holder-A very good tool for locking the bell of the front or rear scooter variator when unscrewing nuts in a garage environment. View detail
I used it to remove Flywheel.
I used it to exchange Flywheel of LETS 4.
Because it is universal, it seems that it can be used for other car models, but the frequency of use is not so high, so it is a product that can not be said so, it is appreciated if you can suppress Cost a little more.
View detail
Restraint device
In overhauling Clutch of SUPER CUB, a tool to fix Clutch became necessary. There were several kinds of tools to fix, but I chose Pulley holder which is tenacious for the time being
Clamp the Holder in Clutch, rotate the handle and tighten it to complete the set. I was able to remove it easily by putting pressure on Lock nut using exclusive Wrench. Clutch that was immersed in oil can also be fixed without slipping
I found out when using it, but Clutch still moves with just being caught in Pulley holder. So when detaching you must hold down the handle or hook it somewhere so as not to move. Naturally? - ω - `)
View detail
It was able to be used without problems
Purchase for Clutch exchange.
Quality was also good and could be used without problems
The price is reasonable as it is
Because it can only rotate by 180 ° in the attached Lever
I felt uncomfortable with a small car like 4 MINI.
If the tip is hexagon etc. so that it can be used even with Spanner etc.
I thought it was more convenient to use.
View detail
Good product with strength and satisfactory making
I bought it for FORZAMF 08 Drive belt exchange. Although the price was reasonable and there was anxiety about the product strength, it was relieved with firm making to actually take it. We use Impact wrench when removing Pulley but this product is necessary because we use Torque wrench when installing. View detail
It is cheap and a good Holder
Everything that comes from any Manufacturer has hardly changed
I bought the one with the cheapest KN project
Usability can be used together with Pulley face
Of course it can also be used on the Driven side
Because bar sticks are both tightened at the edge and Nut is removed, the part of the bar can be removed
It can be done as needed
Adjustment of the ring part can also be adjusted to 3 stages Can be changed by the butterfly Screw part of the horizontal board
View detail
Used with Overhaul
I bought this engine for Overhaul this time GORILLA Engine. For the tool to be used for 12VEngine to remove Flywheel, since the pickup part can not be used in the tool which was used up to now, it was possible to remove it easily by using the newly purchased Universal holder.
It is mandatory for 12VEngine.
View detail
HondaBENLY50110 Pulley
Honda BENLY 50110! Weight Roller for purchase, purchase! Honda car Scooter can be used in general, has become convenient. I need someone to keep me own View detail
Really for 4 mini?
I bought it for use under the waist of AB27's Engine, but I could not use it. Firmly does not fit in the hole of Flywheel. If you use it Thunder etc. There is no choice but to shave the Arm part. It was useless shopping. View detail
To Scooter maintenance
Purchased for MAJESTY 125 maintenance. I did not have the Outer removal tool, so I am saved.. It was very cheap, so I am a little worried, but I still have to use durability from now on. Continue to use and understand something, I will write. View detail
This can be used.
I used it for desorption of Pulley of CYGNUS1YP.
Shaft is attached to the Handlebar part so that it can be tightly tightened, but if you tighten it with so much power, you can hold it firmly.
Initially, I wondered whether to become Universal wrench, but because the hooked part is deep, it is hard to use (Not available) Because there was information that it was made to Pulley holder. Results were purchased and correct answer was Large.
There is no place to use it, but the Red Rubber to hold it is weaker than we thought, it will be soooolid but it seemed like it was good to have bought it after a long time.
View detail
Watch Impre
I watched Impre, I decided to buy it as a reference.
Good feeling because it can be used for Clutch exchange and Outer Rotor exchange.
Whether it's a little expensive or not.
I just pray that it will not break afterwards.
View detail
To fix Clutch
To fix CUB's centrifugal Clutch
It can be used for Clutch change work, Flywheel for Camshaft exchange
I am using it several times, but it can be used without breaking
View detail
It purchased for drive-system (Drive-face, Clutch) exchange of a Scooter.It was easy-to-use and working efficiency improved considerably.It is satisfactory.
It purchased for drive-system (Drive-face, Clutch) exchange of a Scooter.It was easy-to-use and working efficiency improved considerably.It is satisfactory. View detail
The tool which just exists only for a Honda.Unless the Pulley is a nail type, it cannot fix a GEAR type thing.If there are , however this, this one tool is sufficient in removal of a Pulley and a Clutch! You should have, if it is Scooter riding of
The tool which just exists only for a Honda.Unless the
Pulley is a nail type, it cannot fix a GEAR type thing.If there are
, however this, this one tool is sufficient in removal of a Pulley and a Clutch! You should have, if it is Scooter riding of the
Honda.The construction material of the
tool is also good and strong.
View detail
Although the One-touch Pulley holder was used for SEA-BASS vehicles until now, it purchased in order to open a gear Pulley peculiar to a Honda. It was able to open by putting both the sides firmly and turning them alternately with a Wrench. It can u
Although the One-touch Pulley holder was used for SEA-BASS vehicles until now, it purchased in order to open a gear Pulley peculiar to a Honda.
It was able to open by putting
both the sides firmly and turning them alternately with a Wrench.
It can use also for a Clutch outer and is a case of killing two birds with one stone.
View detail