Reviews
Air bubbles will be noticeable.
My first impression was that it was smaller than I had expected.
It is a little small for a Large Motorcycle, giving the impression of unbalance.
The advantage is that it is transparent and allows the best of the paint to be used, but on the other hand, air bubbles can be noticeable, so it must be properly warmed up and applied neatly.
If the angle of the tank is sharp, the edges will peel off, so you need to warm it up thoroughly and degrease it before applying it. I replaced the tank pad with another one because I was concerned about air bubbles and the shape of the smallest tank.
View detail
As expected from DOREMI.
I have been wanting this part for a long time, so I have no comment other than I am satisfied. View detail
I think the things are outstanding.
In my personal opinion, I enjoy how the shape changes from NORMAL because of the two-layer structure.
The upper rear part of the foot rises backward about 3cm to 5cm, and the upper rear part rises backward as well, making the foot look more like a racer from the side. The increased area also makes it easier to get a good knee grip.
Carbon eyes were selected for twill weave.
It's just beautiful. It's great to be able to still have a good looking sc59 that is getting old.
Installation is not so difficult, as it is just a matter of using the double-sided tape already installed on the back side of the product and then snapping it in place.
If you are looking for looks and ease of holding, this is the one to choose.
However, the delivery time is very long. It takes from six months to a year. Only those who can endure the long delivery time should purchase this product.
The company's efforts have made it one month earlier than scheduled, but five months is still a long time to wait.
View detail
Required Items for SS
I chose this well-known product because there are not many other SC77 exclusive products available. The shape was Exactly to the Coloring and Shape of the Tank.
The installation itself is easy, but you need to be reasonably careful to apply it without air bubbles. I don't care much about it, so it took me about 10 minutes to apply it. The surface is smooth, so air bubbles don't bother me too much.
I accidentally applied it right after coating and it came off. However, I was able to cleanly peel off the adhesive tape and reapply it with a 3M double-sided tape that I bought separately. Since the product originally came with 3M, I did not feel any discomfort and it was finished beautifully.
View detail
Good thin
It is expensive but well made.
It's not Decoration bumpy like Stomp Grip, so it doesn't hurt even if you wear thin clothes.
I use it in CircuitMain, so I use Leather suit to grip my knees, but it is very effective in preventing slipping.
It is even thinner from XL to XL2, so it is more user-friendly.
View detail
Tuning fork for Yamaha cars
I bought a tuning fork Mark for my Yamaha. This time, I degreased and centered the car well. The recommended environment is 15℃ or higher, so I used a dryer to warm up the car while I worked. View detail
One point, but it is moderately conspicuous.
The visual effect is very good, except for the high price. View detail
Before Tank gets hurt.
Attached to GSX-8S
I put it on right after delivery before Tank was damaged.
I really wanted Black, but Material was out of stock.:Buy Carbon Style
It is recommended to degrease the surface thoroughly with Silicon-off or similar before applying the paste.
Since it is a seal type, it will be difficult to modify once it is pasted, so be sure to position it properly before pasting it.
The cutout allows for attachment to the loose curvature of the Tank.
There was a little scratch on the left top from the production process, but I didn't mind as it was a consumable item.
View detail
Just for looks?
When I saw the product photo, I thought it was a Rubber quality product, but when I looked at it, it was a little thicker Sticker. The sticker is applied by spraying it with diluted neutral detergent, and there are no problems with air removal or positioning. View detail
Rusted and replaced
I purchased the same product a long time ago, but it rusted due to neglect, so I purchased the same one from here this time. Rust in the tank is unavoidable, but the exterior is clean and the quality of the product is good enough. View detail
Preventing Hurt Now
Since ZX14R is NORMAL and has a tank pad attached, I did not feel the need for a tank protector, but since the Normal tank pad was getting more scratched, I decided to replace it with a tank protector just before the 4000 km mileage mark.
CLEVERWOLF's Tank protector was previously installed on a GSX-R1000/K7 and the quality and precision of the installation was excellent, so CLEVERWOLF was again the choice for this project.
The precision of the fit to the tank shape is as good as ever, and it could be aligned and attached without any problems.
Carbon texture is good, no interference with stomp grips, just fit and Large satisfaction.
View detail
Fits: HARLEY-DAVIDSON FXSB, HARLEY-DAVIDSON FXSE, HARLEY-DAVIDSON FXSBSE, HARLEY-DAVIDSON FXS, HARLEY-DAVIDSON FLSTNSE, HARLEY-DAVIDSON FLTRXST, HARLEY-DAVIDSON FLHXST, HARLEY-DAVIDSON FLTRXS, HARLEY-DAVIDSON FLTRXSE, HARLEY-DAVIDSON FLHXS
Used for FLHXST
RefreshingFit makes Tank look good. View detail
Fits: HONDA CB1000R, HONDA CB1300S, HONDA CBR650F, HONDA CRF1000, HONDA CRF1100, HONDA CRF250RLAC, HONDA GROM125G, HONDA CBR250RR, HONDA CB400SF, HONDA CBR650R
Dress-up.
These are completely self-satisfied dress-up parts.
I'm happy with it myself, but it's expensive!
View detail
I don't see the need for it on public roads.
I have not ridden on it yet since it was installed.
The reason for this is that once installed, OEMSeat is no longer available!
View detail
Ideal for 22 and 23 year spMODEL!
I think it is best suited for the 22 MODEL sp color body.
I think the carbon reduced the area of silver and balanced the color of the car body.
The size feel is JUST right, and the installation accuracy is probably a compound. It is not inexpensive Parts, but the satisfaction level is quite high, and I can recommend it.
View detail
Genuine Yamaha Tank Pads for MT07
These were purchased to help protect the side of the fuel tank from scuffs. There was already a centre tank pad fitted but the side was open to accidents. The correct part was not hard to find. I just used the search facility on Webike and narrowed down the search to OEM Yamaha and fuel tank protection. There was a few to choose from but only this one was specifically Yamaha branded. The cost was pretty good for such a good tank protector and along with a few other items in my basket, I got them all shipped together to save on a bit of shipping cost. I generally use EMS these days as they just get the job done. I almost always get my order delivered within a week and more so in 5 days from shipping Webike warehouse. This was no exception, the order arrived in 5 days as expected. The outer box was sealed along each side and the inner was well padded out. Witth these tank pads being flat and needing to stay that way during transit, Webike ahd the taped to a large piece of cardboard to keep them safe. This worked a treat. The tank pads themselves were packaged in a nice Yamaha standard packet. They are flexible but do have some structure to them. They were slightly on the thin side but when you think about it, if they were much thicker, you would struggle to gethem placed where you need them anyway. I am very pleased with the purchase and look forward to trying them out on the road as they also supoosed to give a little grip to the tank too. Added bonus. Thanks Webike View detail
Knee grip is easier and upper body fatigue is reduced.
I was going to use a Knee Pad to prevent slipping because my body shape is such that the Knee Grip is located at the side cover area, and I had used a Stomp Grip on my previous car and had a good feeling about it. However, the EasyGrip was selected this time because the range of the pad in the side cover was too narrow and it was not in the position I wanted.
Purchased PRO from shape etc. (Circuit) and the color should not spoil the Design as much as possible. [Color] I chose Clear.
I had compared the images with those of the G model up to the 2011 model, and I thought that there would be no problem installing it on the 24 model, and I was right.
Since there is no Instruction Manual for installation, I could not figure out the correct position to put it, but I put it at the position shown in the picture based on the Seat, Cowl shape, and the knee position when straddling the seat, etc.
Since there are protrusions on the surface and the Side cover is also in a phase, it is Large strange to install to prevent air from entering.
I felt like I peeled off the protective Seat on the back side little by little and managed to stretch it by pressing it from the Center toward the outside.
Despite these difficulties, the difference in knee grip between with and without the pad is enormous. Without the pad, I had to press my ankle against the heel guard to support my body, but now I can support my body at two points, my knee and ankle, which considerably improves my sense of fatigue even after running the same distance.
Currently, only the side cover portion is attached, but we plan to attach the tank side portion as needed in the future.
The only complaint is, [Color] It's a bit like Cream, even though it's Clear.
further [Color] It would have been better if it was Clear.
View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XJR400, YAMAHA XJR1300, YAMAHA FZS1000 Feather, YAMAHA FJR1300, YAMAHA FZ1, YAMAHA FZ1 Feather, YAMAHA FZS1000 Feather, YAMAHA FJR1300, YAMAHA FZ1, YAMAHA FZ1 Feather
I'd have to look closely to see it.
It is solid and looks good.
The problem is that the color is so light that I feel that if you don't look closely, you won't be able to tell that it has been changed.
Self-satisfaction.
View detail
Genuine Yamaha Tank Pad for MT10
This was something I had been meaning to buy but never got around to it. My mistake as I ended up with a small scratch from my jacket on the tank. Rather than get a respray, I just thought it best for now to get a new tank pad which will cover the scratch and then also add protection for any future scuffs. The correct tank pad was not hard to find, I just filtered the manufacturer and then model of bike and there were a couple to choose from. I deceided on teh genuine Yamaha one as it will fit as it should do with it being made for this bike. The cost was not too bad actually and better than I had seen for sale locally. With a couple of other tank pads for other bikes, I had them all shipped together via EMS. EMS just do what they say and get your order to you quickly. Mine arrived 5 days after the shipping date which is perfect. The entire order was neatly packed in the box, the tank pads were all kept nice and flat so there was no distortion which could have been a problem when fitting. The tank pad came in a Yamaha packet and was neatly presented. The pad itself feels very nice and smooth but does have a bit of friction due to the materials used. I was expecting a slightly more domed gel pad but for what it is, it's fine for my needs. Fitting was straight forward and when on without issue. Pleased with the purchase and hopefully, this stops any future scuffs from happening with my jacket zip. Thanks Webike View detail
Suzuki tank pad
Item well received.well packed.very satisfied.my second purchase.many more to come.highky recommend.thank you webike.awsome job View detail