Reviews
countermeasure against standing up
Coloring also matched Cafe in Black??Gold.
We won't know the effect until we take it down, but installing it as an insurance policy gave us great peace of mind.
View detail
cosmetically ◎
ZX-10R [24] mounted on
Front of 10R is very luxurious even for OEM with brembo and SHOWA.
Damage to the equipment when it stands up and falls over will require significant repair costs,
I put it on as a cane to keep me from falling.
Hopefully the day when they are active will never come.
Material, because it looks good as one point of view, it gives a good sense of customization.
Compared to other manufacturers, it seems to be a little small, but it is not expensive, so it is OK.
View detail
Fits: SUZUKI KATANA, SUZUKI GSX-S1000, SUZUKI GSX-S1000 GT
I'll never roll over …
I'm going to install it with the idea that it will look a little better before it falls down. View detail
Fits: HONDA VFR800, HONDA CB650R, HONDA CBR650R, HONDA CB650F, HONDA CB1100RS, HONDA CBR650F, HONDA CB1100EX, HONDA CB1000R, HONDA CB1100
BABYFACE Babyface Axle Protector
I usually enjoy my motorcycle life by riding around town and touring.
This Axle Slider is effective in the event of a mossy accident.
Therefore, we have rated it as ineffective.
This is the first Return in 11 years for the Large type.
This is the first Large type of NAKED.
So, I am riding slowly and leisurely in the spirit of the first time.
As you would expect from Babyface, other companies sell Axle Slider.
I thought it was a very different kind of design.
The only thing is that the Shaft is about 10mm shorter on the CB650R.
And Quantity:Pair (for Left and Right) I want 5mm each.
I would not recommend it to my friends for a moment.
Only about 70% of the Nut has been tightened.
We gave it 4 stars for quality and texture.
I think that's about it in terms of cosmetics.
View detail
Fits: YAMAHA MT-10, YAMAHA YZF-R1, BMW S1000RR, HONDA CBR1000RR, BMW S1000R
Easy detachment!
Rather than a rear slider, the Axle Shaft was installed to make it easier to attach and detach the Axle Shaft.
It can be used as a handle like Doorknob when pulling out shafts, and when inserting shafts, the triangular pyramid shape makes it easy to insert the color, etc. without resistance.
Of course, it would also serve as a Slider, but currently it is benefiting from the detachment process.
View detail
Fits: DUCATI STREETFIGHTER V4 S, DUCATI PANIGALE V4, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4 R, DUCATI PANIGALE V4 SP, DUCATI STREETFIGHTER V4, DUCATI SUPERLEGGERA 1299, DUCATI PANIGALE 1199, DUCATI PANIGALE 1199 S, DUCATI PANIGALE 1199 R, DUCATI SUPERLEGGERA 1199, DUCATI PANIGALE 1299, DUCATI PANIGALE 1299 S, DUCATI PANIGALE 1299 R FINAL EDITION, DUCATI STREETFIGHTER V4 S, DUCATI PANIGALE V4, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4 R, DUCATI PANIGALE V4 SP, DUCATI STREETFIGHTER V4
A walking stick before you fall3
[How is it used?
We chose this product because we wanted to protect the Swing Arm.
I chose Red to match the body color and am satisfied with the color, which is ideal.
Was the one you received as per Image?
Swing Arm is more overhanging,
Protection is not complete.
Was the installation difficult?
A handling Instruction Manual is included, which describes the torque for tightening the fixing bolt.
I'm not sure if mine was an outlier or not, because the Left Side Bolt length is too short,
Fixed parts had to be machined.
How was your experience with it?
Unlike the Front, it rotates with the Wheel,
Easy to loosen, Locktite was applied to the fixed Bolt.
[Included Parts:were they on?
A handling Instruction Manual was included in the package.
[Was there anything that disappointed you?
The key Swing Arm cannot be protected.
View detail
Fits: DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI PANIGALE V4 SP, DUCATI PANIGALE V4 R, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4, DUCATI SUPERLEGGERA 1299, DUCATI PANIGALE 1299 R FINAL EDITION, DUCATI PANIGALE 1299 S, DUCATI PANIGALE 1299
A walking stick before swallowing a fall2
[How is it used?
I was not sure whether to choose OEM Product or not, but I decided to choose this product to unify Rear and Manufacturer.
I chose Red to match the body color, and I am satisfied with the ideal color.
I feel it will protect the Front fork in the event of a fall.
Was the one you received as per Image?
I feel it is good without being too conspicuous.
Was the installation difficult?
A handling Instruction Manual is included, which describes the torque for tightening the fixed bolt, making installation easy.
How was your experience with it?
I thought it would be lighter than the BoltPierced Type ones,
The weight was there.
Plate tends to remain in the Axle Shaft when it is removed,
It takes a little time and effort.
[Included Parts:were they on?
A handling Instruction Manual was included in the package.
[Was there anything that disappointed you?
None in particular.
View detail
Fits: YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-07
Genuine R&G Fork Protectors for Yamaha MT07 2017
This is a set of front fork protectors for the Yamaha MT07 2017 model. There are a lot of protecvtion parts you can get for these bikes and you would be hard pushed to find anything as good as R&G ones. Finding was not hard for the part number, I just checked R&G website and found them already on Webike. With a few other parts in my order, I had all shipped with EMS and arrived in 5 days. The fork protectors are a bar with 2 cotton reels on the ends. These do bolt on pretty tightly and do prortect your fork legs in the event of an accident. Obviously, a precautionary measure as you just never know. The quality of the R&G protectors is awesome. The threaded ends are perfect and work smoothly. As I said before, a nice snug fit so need to worry about wobble at speed. The ends are very hard and from experience, they do take a lot to grind down. Anyway, very happy with purchase. Thanks Webike. View detail
Fits: KAWASAKI Z900RS SE, KAWASAKI Z900, KAWASAKI Z900
Slightly Large size
When it came time to install it, I felt it was bigger than I expected.
That may be what makes it more effective if it happens.
Installation is very easy.
The design is good except for the large size, and there are no problems with the texture and quality since it is an OEM product.
View detail
Fits: YAMAHA FZ-10, YAMAHA MT-10 SP, YAMAHA MT-10, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA YZF-R1M, YAMAHA YZF-R1M, YAMAHA YZF-R6
GILLES TOOLING GTA Front Wheel Slider
Damage reduction to the vehicle in the event of a fall and was installed as a talisman.
Above all, it looks good and Parenthesis is good.
View detail
The front is also Babyface to match the engine slider.
For Triumph TRIDENT, Babyface Front axle protector was installed on Tigersport 660 as well as Engine slider.
Although less expensive than OEM products, the appearance and quality of the parts are good, and I think they are reliable parts.
Installation is easy, but I think the attached Instruction Manual is difficult to understand.
Effectiveness is unknown because there are no falls.
View detail
Fits: BMW S1000XR, BMW F850GS Adventure, BMW S1000RR, BMW S1000R, BMW S1000R, BMW F750GS, BMW S1000RR, BMW F850GS, BMW S1000RR, BMW S1000RR, BMW S1000RR, BMW S1000R, BMW F900R, BMW F900XR, BMW M1000RR, BMW M1000RR, BMW M1000R, BMW F900GS Adventure, BMW F900GS
LeftBolt portion comes out a little.
[How is it used?
Mounted on rear axle shaft
Was the one you received as per Image?
Street Image
Was the installation difficult?
Easy to use 10mm Socket and tighten from both SIDE.
How was your experience with it?
In case of a fall
[Included Parts:were they on?
Washeretc., can be installed with Included Parts:only
[Was there anything that disappointed you?
None; Left SideBolt portion will show some.
Other items that would be helpful
Availability of Instruction Manual
Yes, but translation (please enter here) is not supported.
View detail
Fits: BMW F850GS Adventure, BMW F850GS, BMW F750GS, BMW F900XR, BMW F900R, BMW F900GS Adventure
It fits.
It feels like an OEM product. Easy to install. I installed it to protect my Caliper in case of a fall. View detail
You have to remove the shaft and install it.
The cap on the Right Side is clearly different in size from the Left Side and hits the GunGun so hard that it is impossible to install unless the front is raised and the shaft is pulled out. View detail
It is easy to install.
This is my first Return in 20 years, so I bought it to prevent standing moss!
Torque wrench is required as 5Nm is indicated for screw tightening
I didn't have one, so I bought a Torque wrench, but I didn't know how to use it, so I took it to a Motorcycle shop and installed it myself while they showed me how.
The appearance is not so prominent, so it may not be enough for those whose main purpose is to dress-up.
I don't know how effective it is because it hasn't rubbed off yet.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000 GT
Before installation, there is a conundrum.
It could not be installed on Axle Shaft as is.
Shaft insert is Quantity:Pair (for Left and Right) Since it is the opposite, the Protector cannot be installed (press-fit) unless it is replaced.
I will have to ask Motorcycle shop to replace the Shaft when I replace the Tire.
(It's a pain to have to pay for labor)
I am very disappointed that I cannot install it even though I ordered it and it arrived the next day.
P.S. I checked MotorcycleCatalogue and all applicable Motorcycles were Nut side Left.
Please note that those who purchase
View detail
Axle Slider
Axle Sliders are sold by various manufacturers, but most of them are black in color, and this was the only one in gold. I am riding a Z900RS SE, and I really wanted a gold color because the front CB400T's tube is gold. It is easy to install. View detail
The Z900rs requires some modification.
First of all, the design of the text is different between the image and the real thing, but I didn't mind it too much.
The Left Side Lock nut is not included in the kit, so you need to prepare it by yourself. I first selected "Pitch normal" for the Left Side Lock nut and failed to use it. (You are solely responsible for your own mistake.)
The lock nut of the M18 was too tight for the Left Side Protector, so I had to grind the inside of the Protector a little to fit.
Quantity:Pair (for Left and Right) The bolt for penetrating the "B" is also a little long, and it is difficult to apply the tip cap, so both ends were shaved off.
Note that the z900rs does not have a bolt on and requires some modification.
View detail
Front fork protection?
I personally like it better than other Manufacturer and it looks good. View detail
Exactly what I expected.
I have an external caliper, so I installed it to avoid damaging it as much as possible. It is not as aggressive as the rear slider and does not look bad after installation. It will be installed without any problem. View detail