Reviews
Used for Tire Replacement
Anyway, it's cheap!
I recommend it because it is a price that makes Tire replacement easy!
It's properly three for the price!
I am going to try to replace the Tire on the CUB110.
View detail
Cheap! Cheap anyway!
Anyway, it's cheap!
It is the cheapest Rim Band and fulfills the functions!
When replacing the Tube, the price is low and the replacement is safe!
View detail
Shield base is OEM Product
I have been using Mirror shield from SHOEIOEM.
Impressions https://imp.webike.net/article/609046/
Gold Mirror has been stripped and replaced.
This product is a mirrored version of the original SHOEIOriginal base product. Therefore, the transmittance is the same as that of the OEM Product.
We have a lineup of colors that are not available in OEM Products. [Color] I went with Smoke/Blue.
Fitting is not a problem at all since the base is an OEM product.
The difference is that the OEM Product is fully Mirrored, but the sides of this product are not Mirrored. It doesn't matter. As long as the price is lower.
Visibility is fine during the day. Tunnel is also Large sturdy if run slowly.
It is important to wipe the Mirrored Shield gently with a wet Dustcloth.
Chemicals are a total no-no. It will peel off.
It is also no good if it is still wet from rain, etc. It will float.
View detail
Service manuals that are fun to look at
Items is essential to know every detail about your car, isn't it? I am only a hobbyist and a skilled car builder, but I feel happy just reading these items because of my love for machines and motor cycles. Of course, I want to make my car last longer, but I also don't want to cause accidents with my own troublemaking. Nowadays, we can look up anything on the Net, but having a book at hand gives me an indescribable feeling of happiness and satisfaction. I recommend this book to anyone who understands it! View detail
Reliable Standard Parts
I used this for a reservoir tank on a rear brake. I purchased this tank to replace the reservoir tank that was originally attached to the brake because the fixing part of the reservoir tank was damaged.
It was the same one that originally came with the NORMAL and was easy to replace.
Transparencies and books of the same model number [Color] I was bothered that the price difference was Large in Smoke, but there were considerable differences in the Packing section, Material, etc.
View detail
Fits: BMW R1200GS, BMW R1200GS Adventure, BMW R1200R, BMW R1200RS, BMW R1200RT, BMW R1250GS, BMW R1250GS Adventure, BMW R1250R, BMW R1250RS, BMW R1250RT
It's a must for Oil replacement.
BMW is said to be a Motorcycle only for the rich, but I still want to put in my favorite Oil and keep the cost down.
The only thing I decided to ask Dealer for was the price, and the price is meta-fucking-high.
So I changed the Oil by myself!
Attachment, too!
This is essential in that case!
View detail
Under Cowl
We have installed YOSHIMURAmachine bendedFull Exhaust System. I installed it temporarily and found no particular interference, so I painted it and installed it. I was very lucky because I was prepared for the modification. It's nice to have a different atmosphere. View detail
Installation super kan tan, sound exciting.
After removing the OEMSilencer, it was installed with a pop. The driving sound is sensual. I am very happy with my purchase. The good thing is that Webig had it in stock so I received it right away. View detail
Fits: YAMAHA TT-R50E, YAMAHA YZ250F, YAMAHA YZ400F, YAMAHA YZ426F, YAMAHA YZ450F, YAMAHA WR250F, YAMAHA WR400F, YAMAHA WR426F, YAMAHA WR250R, YAMAHA WR250X, YAMAHA XT250X, YAMAHA XG250 TRICKER, YAMAHA SEROW250
Only looks
This price is not cosmetic just because it looks different….
Since we changed the OilfiFiller cap, we decided to do the other side as well.
View detail
Fits: YAMAHA SR400
Blinker's blinking malfunction is one of the first things to suspect.
I have been doing a lot of maintenance work, but I have not touched the electrical system much at all, so I decided to take this opportunity to do maintenance work.
Blinker stopped blinking and,
It vibrates a lot, and the bulb often goes out, and sometimes the battery is weak, but I suspected the blinker relay, since it had just been renewed.
What is Blinker relay?
Blinker relay is a component that operates the blinking of the direction indicator installed in cars and motorcycles. 。 Also known as a "flasher relay," it enables blinking at regular intervals by switching an electrical signal on and off.
Blinker relay seems to have different usage and characteristics between external and OEM.
Blinker relay outside the company
[OEMBlinker relay
The Blinker relay of the ManufacturerOEM is designed to match the power consumption of the OEM Halogen bulb, and when the Blinker Valve is turned off, it will detect the change in power consumption and will flash Polished and High flasher to inform the user. The Blinker relay is designed to match the power consumption of Halogen bulbs in OEMs.
→In my case, I don't intend to change to LED, and I prefer to keep Halogen, so I will replace the OEMBlinker relay as it is.
What are the symptoms of a bad Blinker relay? What is a Flasher relay (Blinker relay)? Blinker blinks at regular intervals." Parts. 。 When the flasher relay fails, The Blinker is still on. Blinker won't stick." Symptoms such as
And if you leave it as it is, it will break.
When it breaks.
The wire is disconnected and the Headlight and Blinker do not turn on when the Switch is turned on.
By the way, in my case.
Flashes normally when Idling 。
When the Engine is revved up, it sometimes flashes irregularly. 。
Flashes irregularly at higher RPMs than at constant RPMs. 。
→I'll replace it while it's still irregular...it would be troublesome if it gets disconnected...(laughs)
How to exchange
Remove ?Seat.
↓
The Blinker relay is a black square Matchbox-like component with a small Elastic band on the bottom of the Seat.
↓
(3) Coupler removes the old Blinker relay and simply inserts the new Blinker relay.
〜After replacement
Incorrect blinking has been resolved.
I was relieved that the wire was not disconnected (laughs).
In such cases, it may be a good idea to replace the Blinker relay first, because the parts cost is low and the work is simple and can be done on an individual Level.
View detail
Fits: YAMAHA PW50 (PW50B1), YAMAHA PW50 (PW50D1), YAMAHA PW50 (PW50E1), YAMAHA PW50 (PW50F1), YAMAHA PW50 (PW50G2), YAMAHA PW50 (PW50H2), YAMAHA PW50 (PW50J2), YAMAHA PW50 (PW50K2), YAMAHA PW50 (PW50L2), YAMAHA PW50 (PW50M2), YAMAHA PW50 (PW50W), YAMAHA PW50 (PW50X), YAMAHA PW50 (PW50Y), YAMAHA PW50
PW50
yamaha PW50Carburetor.
Replaced because it was no longer Idling.
Other Brand Products are also available on the Net for about 3000 yen, but they received mixed reviews.
OEM Product.
I am glad that it was Timing with a 5% discount on OEM Product at WeBig.
There are several model numbers of CarburetorAssembly for each year of the long-lived model,
Note that the price is also RoseRose.
View detail
With Down Type Exhaust System, you have to make a bracket.
Was the one you received as per Image? Better than Image.
Was the installation difficult? It is easy to install if you are a do-it-yourselfer.
[Was there anything that disappointed you?
The MORIWAKIDown Type Exhaust System does not allow the Bracket to be installed, so I lowered the Bracket so that it does not interfere with the Brake and made it myself.
View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
Excellent response.
This time, I noticed that the new one was defective and after installing it in the vehicle, I replaced it with a new one.
I had them send it to me and I was able to get it fixed. It is only a sticker, but it is true that the sticker was peeling off, so I asked them to take care of it, even though it was a hassle.
View detail
Required for Crank Case Cover
Hose holder is attached to Crankcase and is required when replacing KOSOCrank Case Cover. The other attachments are all gold and the same color, so 5 stars. View detail
good-looking
Replaced with Swing Arm replacement.
Better looking than OEM
View detail
Circlip for CHOINORI front sprocket
[How is it used?
It will be a circlip to fix the front sprocket of SUZUKI/CHOINORI.
Was the one you received as per Image?
It was just as Image.
Circlip replaced an existing item that was not known when it was replaced due to wear and tear.
How was your experience with it?
Since it is not performance-related, there is no particular change before or after the replacement.
However, it is effective in that it eliminates the risk of cracking.
[Points to note]
There are no areas that require special attention.
How did it compare to other products?
There is no Other Brand Productetc., so this one, OEM Product, is required.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000 (air-cooled), KAWASAKI Z900 (KZ900), KAWASAKI Z750 (air-cooled)
I think the cosmetics are good.
OEM Camshaft Cover Plug is Material:Rubber, but in recent years, Kawasaki's Material:My confidence in Rubber products is declining (personal opinion), so I switched to Aluminum!
I was worried about the accuracy of the Gasket and parts, but when I assembled it, I was surprised at the accuracy of the parts.
I put a little bit of Toyota's Black liquid Gasket on it and assembled it.
No Oil leakage after that, so I guess it's good.
Of course Torque wrench is a must!
View detail
Goggles Type
[How is it used? Replace with Clear shield
Was the one you received as per Image? as-is image
How was your experience with it? It was good
[Points to note] Better Mask through the nose.
How did it compare to other products? I have nothing to compare it to.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
TS125R.
This is the Hose of the 2-st Oil.
This is the transfer section from the oil pump to the carburetor.
When cleaning the carburetor, the existing hose was replaced because it had broken due to deterioration.
I.D. 2mm was not found in any homestore or supply store.
View detail
OEM products of other Manufacturer?
[How is it used?
When SUZUKI/CHOINORI replaced a tire, the air valve was cracked, so this tool was used to replace it with an OEM product.
Was the one you received as per Image?
It was just as Image.
Perhaps this product is the same manufacturer as the products sold by AstroPROducts, Amazon, etc.
The color, shape, etc. are similar.
How was your experience with it?
There were no problems with use at all.
A fair amount of force is required to pull the Valve.
[Points to note]
When connecting to Valve, it is necessary to remove the Parts called Insects in Valve.
How did it compare to other products?
I have not used other Manufacturers, but I think the low-priced ones are sufficient because there is almost no difference in Gold amount.
View detail