Reviews
Fits: DUCATI MONSTER 937, DUCATI MONSTER 937 PLUS, DUCATI MONSTER 937, DUCATI MONSTER 937 PLUS
I am satisfied with the quality.
Price is a little high, but quality is good View detail
Also, it's Yoshimura.
I ordered a 23-year-old Katana Pandaless after tuning and the hall was empty.
I was worried before ordering, but when I received the item, I was very happy with it.
Like Yoshimura products, the fabrication is great. You can trust me and order
Contrary to what you see in the picture, I was a little surprised that it was small. ---------------------- The 23-year-old Katana Pandaris tuned and the hall was empty and ordered. I had a lot of trouble before ordering, but I really liked it after receiving it. It's like Yoshimura's product. I think you can believe and order Unlike what I saw in the picture, I was surprised because it was small Powered by Google Translator
View detail
The screw is iron
In the photo, the screw is Material:It looked like Stainless Steel, but in fact it was a cheap chrome plated iron screw. I think that people who install such parts should be particular about the threads. I went to buy Stainless Steel screws as soon as I could. (M6, 20mm length, 25mm quantity):(2pc) View detail
Good product at a reasonable price.
I chose them based on price from a number of companies, but I am satisfied with the QUALITY, which is more than I had imagined.
Quantity:1pc. eye photo
Material:Stainless Steel Body with Rubber packing and Material:Waterproof performance cannot be guaranteed and is for reference only.
Second and third pictures
The front fork boots and Fender mounting screws were loosened, and the EmblemHolder stays were inserted into the gap between the front fork boots and Fender.
View detail
แผ่นติด พรบ สีสันสวยงามเข้ารูป View detail
Insufficient strength
Material:It is aluminum, so be careful not to overtighten. It can be easily broken. View detail
Quality as good as the price
There are similar products with lower prices, but I am satisfied with POSH products because of their higher quality. View detail
For Z125 Pro Dress-up
Kawasaki Z125 Pro I was looking for a mesh seat to decorate a hole in my dreary cowl,
I found this product and bought it.
(Work procedure)
Cowl removal.
Cut this mesh seat to a suitable large size using scissors and press it against the cowl from the inside. Cut the excess part.
It is not difficult to mold with AluminumMaterial, and it can be fitted to curved surfaces to some extent.
100s Epoxy Adhesive (The one that mixes liquid 1 and 2) fixed at
At first I was thinking of decorating only the Front part and the hole around the knee of the Side cowl,
In addition, I decorated Under Cowl other holes. (And if you feel it is too much, you can remove it later.) 。
Looks good for amateur work, just like the Image. (Since the inside is not visible at a glance.) 。
It has been a year since they were installed and there have been no problems with dislodging or warping.
It is simply a decoration, but it changes the impression of the appearance, and I am satisfied with the cost performance. (Self-satisfaction) 。
The extra mesh seat is kept as a spare.
View detail
The weld cracked.
Re-implied after last purchase, the front weld cracked after 1 year and 10 months of use since installation (tears).
I thought it would be a little more durable, but I was disappointed….
I would like to reweld it from the Reverse side and use it again.
View detail
Fits: HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA SUPER CUB110ThailandMODEL, HONDA SUPER CUBC125, HONDA CT125, HONDA GROM, HONDA MSX GROM, SUZUKI Gixxer, HONDA DAX125
Very easy.
Installed on a grom jc92.
Chain adjustment has become very easy. It is also an Accent for the suspension.
View detail
ครอบสวิตกุญแจ kitaco monkey 125 View detail
2023Current MODEL needs processing
Note that the front sprocket cover interferes with the current 23-year model and cannot be installed without modification.
Conversely, if the BodyBracket portion is cut by about 1 cm, it can be attached normally.
The design is very simple, so when you install the ROD, it is very shaky. Also, the holder part to insert the ROD is short, so you have to make your own bracket to fix the ROD from the bolt to install the Rear Carrier or Air Cleaner Duct, It is uneasy when driving.
I will upload the pictures later when I install my own Bracket.
Well, it might be easy to tie them up with a band or a rubber. But...
View detail
casually stylish
Casually stylish!
Mukawa Logo is good for details.
View detail
Fits: HONDA Super Cub 50, HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA CROSS CUB, HONDA SUPER CUB110, HONDA SUPER CUB110ThailandMODEL, HONDA CUB100EX, HONDA CROSS CUB50, HONDA SUPER CUB 50
Chain case hole Cover
High quality and easy to install and remove (conversely, theft is a concern) View detail
Material:Aluminum, but heavy in its own way.
When used as a Sticker Plate, it is mounted on the Left side of the Number, so the KN imprint is on the reverse side, facing sideways.
It is a little too big to use as a Key Holder.
I'm not the only one who thought it came with a Key Holder in addition to the Plate.
View detail
![[M&Ms (Making and Monsters)] ERO'LIP License Plate Bolt](https://img.webike-cdn.net/catalogue/images/78153/0000023725000_large_TS.jpg)
ERO’LIP License Plate Bolt
Mounted on 2018 FLHTKSE
Nice! Easy to install
Stylish to look at.
Burlesque Red and NeonPink
Quantity:Pair (for Left and Right) I chose a different color. 1pc. is too expensive at about 4,000 yen, but …
It seems to be handmade by craftsmen, so it can't be helped.
However, it is well worth the price as it is beautifully made.
My friends wanted to copy it and several of them bought it right away!
https://ameblo.jp/keikocookingchicken/entry-12792830648.html
View detail
Beautiful browning
I really wanted the Titanium color as it is, but Webig didn't have it in stock, so I bought this product.
Well, it is not so noticeable even if it is replaced, and it is a product for self-satisfaction.
View detail
ตอนนี้ได้รับแล้ว รอไม่นานถือว่าไวมากๆ สั่งมาหลายรอบแล้ว สินค้าตรงตามสั่งทุกครั้ง ไม่เคยมีชิ้นไหนชำรุด หรือ เสียหาย สวยงามตามรูปใส่แล้วรถดูสวย ราคาถูกกว่าที่อื่นเยอะเลย โดยรวมถูกใจมากๆ เดี๋ยวสั่งของเรื่อยๆๆแน่นอนครับ View detail
Fits: HONDA RS125, HONDA RS250, HONDA RS500, YAMAHA TZ125, YAMAHA TZ250, YAMAHA TZ500, HONDA RS125, HONDA RS250, HONDA RS500, YAMAHA TZ125, YAMAHA TZ250, YAMAHA TZ500
Attractive GP M6 screws
These are very attractive, lightweight aluminum screws with a simple slot rather than a philips or allen key head. I used a little liquid gasket to keep a light bond between the screw and the plastic Yamaha mount. View detail
Fits: HONDA CRF300L RALLY, HONDA CRF300L, HONDA CRF250RALLY(S), HONDA CRF250RALLY, HONDA CRF250L(S), HONDA CRF250M, HONDA CRF250L, HONDA TRAIL125, HONDA CT125, HONDA MONKEY125, HONDA CROSS CUB110, HONDA CROSS CUB50, HONDA CRF110F
Easy to install!
I used ORing with engine oil on it, but if you are worried about it, prepare it beforehand. I think it looks different and is cost effective. View detail