Reviews
Repair
I am embarrassed to say that this is a replacement due to a standing blockage.
When ordering products, you can choose which Shop you would like to have installed.
After that, the installation process is completed with only a few email exchanges. As for the product, it is well packaged and I have nothing to say.
View detail
Exactly for klx250 OEM ride height
[How is it used?
I purchased this product because I need this product to install the following forged AluminumKick Stand on my OEM ride height KLX250.
https://www.webike.net/sd/23952653/
Was the installation difficult?
Simply remove and install the Bolt1 pc.
Note that the Socket will not fit in the hole unless the outer diameter of the Socket is small.
How was your experience with it?
It worked fine
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA TRACER9 GT, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900
Don't fall down.
Engine, FR/RRAxle, ClutchBox, Generator, etc.
There are various types of sliders and guards, but this time we installed a guard on both sides of the engine.
I don't want to test the effect too much, but first of all, I think it will be grounded first because it sticks out more properly than EngineUnit.
The foundation is made of Plate and Pipe of the genus Gold, and is attached to the frame, creating a certain degree of rigidity.
In addition, the gold plastic finisher with the Yamaha logo and the decorative spacer reduce the ruggedness that is often seen in the Guard and make it a stylish Yamaha-like product.
I don't want to be a burden to you, but I think it is a good choice to stock up on them as a fallback plan.
One point, the bolt at the stopping point on the front side of the vehicle may need to be Torque managed properly.
Incidentally, there is another YamahaOEM in the shape of a starfish, which is also a Quantity:I think it will be even more prepared if it is attached with a Set.
View detail
It is easy to install.
This is my first Return in 20 years, so I bought it to prevent standing moss!
Torque wrench is required as 5Nm is indicated for screw tightening
I didn't have one, so I bought a Torque wrench, but I didn't know how to use it, so I took it to a Motorcycle shop and installed it myself while they showed me how.
The appearance is not so prominent, so it may not be enough for those whose main purpose is to dress-up.
I don't know how effective it is because it hasn't rubbed off yet.
View detail
Fits: HONDA , SUZUKI , DUCATI , KAWASAKI NINJA ZX-10R, KAWASAKI NINJA ZX-6R, KAWASAKI NINJA1000, KAWASAKI Z1000, KAWASAKI Z800, TRIUMPH DAYTONA675, BMW S1000RR, BMW S1000RR
Good quality
Accuracy quality is good.
I should have checked the outside diameter dimensions of where the Hook hangs before purchasing.
It would be appreciated if you could indicate the size in the Catalogue Spec.
The diameter of the Attachment of the Rear stand is Small, Quantity:Set was not possible.
View detail
It is a good product
I purchased this product because I was concerned about working with the Shoulder Type since the Motorcycle Axle is not hollow. There is no problem in installation. I don't think it will come off with the Y-type Hook. The quality is quite good, but the price is high. If it were a little cheaper, it would be easier for people in need to get their hands on it. View detail
OEM is getting bald and bald and needs to be replaced.
[How is it used?
Installed on KLX250 OEM ride height.
The tips are too short to install at OEM ride height, so we replaced them with ↓'s 105mm Option tips.
https://www.webike.net/sd/23908023/
Was the installation difficult?
Easy installation using only common tools.
Remove the Side Stand, so if you have a Maintenance Stand or a Motorcycle stand, use the Large sturdy stand.
How was your experience with it?
Refreshing because the OEM was bald and bald.
I feel good about it because I think it has reduced the weight somewhat.
View detail
YAMAHAPerformance damper
After a short ride, I feel that the ride is similar to the ride immediately after the front fork is over-fallen, with a lighter steering action and a slight reduction in vibration. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
I purchased this product for both heat protection and dress-up.
The fit is slightly floaty….
However, it looks like Carbon and is ideal for dress-up!
I bought it for heat protection, but I don't know how effective it is because the temperature doesn't go up where I live this time of year, but when I touched it after coming home, it didn't feel so hot, so I think there is a big difference between having this Cover and not having it!
We will continue to use the product as is!
View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
Dress-up effect
The Instruction Manual says to remove the Rear Carrier, so I expected to do a lot of work, but the point is that the Hexagon Socket Bolt on the Stop Lamp should turn. If you use this rough technique, you can install the carriers by simply removing and attaching the plate. I removed only the bolt fixing the carrier and floated the rear suspension bolt on the axis at an angle.
The upper side has a long hole so that it can be adjusted so that it does not contact the Stop-lamp, but it does hit the Blinker hard enough to make an individual difference. It seems to be able to prevent a thin branch, but it seems to be not so effective as a Guard. It is a good for dress-up purpose because it becomes a robust Image.
View detail
Fallen cannibals
The pedestal is rugged, but it is attached at a position where the Damage does not go directly to the body of the vehicle at the tipping angle.
Quantity:Pair (for Left and Right) Asymmetrically, there may be a preference for or against, but it seems to serve the role well enough.
View detail
We will protect it well.
Well done.
If the Swingarm Protector is used in combination with the Mirror, Handlebar Weight, and Lever are only affected by a fall.
It protects them well.
View detail
Chain Guard
The system was installed in order to comply with Circuit's vehicle regulations.
The Bolt holes were easily installed without any misalignment, etc.
The gap between the Bolt and the Sprocket is narrow and there is no interference, but a shorter Bolt would be better.
The protruding corners look bad.
View detail
Fits: SUZUKI DL1000 V-STROM650, BMW S1000RR, BMW S1000RR, KAWASAKI Z1000, KAWASAKI ZX-10R, KAWASAKI ZX-25R, KAWASAKI ZX-6R, SUZUKI GSR750, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R750, SUZUKI GSX-S1000F, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX250R, SUZUKI SV650, SUZUKI KATANA, SUZUKI GSX-S1000, KAWASAKI NINJA250
Easy and clean!
It's easy, beautiful, and a dress-up! View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
Frame Slider
The price is low, installation is easy, and Parenthesis is good. View detail
Slider
Easy installation and no drilling required. View detail
Installed on JA10CROSS CUB
I was told that it was not compatible with JA10CROSS CUB, but I was able to install it successfully.
We have slightly modified the STAND, but there are no problems.
View detail
BITTER X-GRIP
Fits well with 2023 Honda crf300l. The delivery of the product is fast and the quality is satisfactory. It is also easy to mount the product, so anyone can mount it. I like the frame protection and design the most. View detail
Fits: HONDA Ape 50, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 50, HONDA XR100 Motard, HONDA XR50 Motard
Total length 190-200
Excellent appearance and rustproofing performance.
I am using it on the APE100 at the same time as a Side Stand Bracket from another company, but it is too short and may cause the vehicle body to lean too much.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI KATANA, SUZUKI GSX-S1000GT
Looks good!
First, it looks better.
It is not as assertive as Frame Slider, but that is good.
Replacement is easy; simply remove the existing Screw and replace it.
Some Packing also needs to be replaced, but it was too much trouble so we reused it.
So far there have been no leaks.
View detail