Reviews
Perfect Match for Bar-end Mirrors
Used together with Daytona grips and bar-end mirrors,everything matches up and works perfectly. Absolutely necessary when using Daytona's bar - end mirrors. View detail
Fits: SUZUKI GSR250, SUZUKI GSR400, SUZUKI GSX1400, SUZUKI GLADIUS650400, SUZUKI GSX-S1000F, SUZUKI SV650, SUZUKI V-STROAM250, SUZUKI GSX-S1000, SUZUKI GSX-S1000S, SUZUKI V-STROAM, SUZUKI BURGMAN400, SUZUKI GSX250R, SUZUKI GSX-S1000GT, SUZUKI V-STROAM1050, SUZUKI V-STROAM1050XT, SUZUKI V-STROAM1050DE, SUZUKI V-STROAM650, SUZUKI V-STROAM650XT
z900rsHandlebar replacement
The Inner that can be combined with this Bar End is POSH item number : 031275-WN-10.
This time, it was installed on HURRICANE's Narrow3 model.
The product description stated that rubber packingetc. is required, but it is not necessary.
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX1300R
Vibration control?
I don't know why I keep changing it to Bar End.
Well, the Ninja 650 had a terrible vibration, but I put this on and it cured it to some extent, so I think the system of the GSX-R1000R, which turns to Wilde, will be better if I put a little weight on it.
However, I don't feel that the vibration is that bad, so I guess it's just a design thing? (Laughs)
View detail
SP Mukawa Handlebar End Red
I used High Solo for the grip replacement. The body color is darker, but I chose red for the bar end. View detail
Low price despite wide compatibility and high quality ◎
■ Design
The color and design of the Grip were chosen to match the color and design of the Grip. The large bar end is also a good choice, but since the grip installed on the bike is too flashy, we chose the compact Revolver type. I chose the compact Revolver type because the Grip is too flashy.
Performance
It is heavy for its size, but not heavy enough to suppress vibration. I think it is too small to be effective in the event of a fall. In my case, I bought it for fashion, so there is nothing more I can say about its performance.
■Difficulty of installation
This is not my experience because I asked the Shop to install it, but this product seems to be a Type that can be fixed to the Handlebar by inflating the attached RubberSpacer between the Bolt and the Handlebar. Therefore, it is good that it can be used for a wide range of car models. However, in the case of the Grom, there is an OEM Bolt hole, so it seems that the RubberSpacer can be fixed as it is without using it. However, the Throttle side is not the same size as the Spacer, and I was told that it needs to be purchased separately (in my case, the problem was solved by diverting the surplus parts that were generated when replacing the Bar End of the PCX that I had requested together).
Also, in the case of JC75 Grom, it seems that the OEM Bar End is so tightened by the devil's Torque that the Screw Mounts are screwed up, and when removing it, it has to be forcibly removed using a Spanner. Therefore, if you want to keep the OEM bar end on your Beauty, you will have to go through a lot of trouble.
*Please note that the photos include the Grip that was installed at the same time.
View detail
Bar End
I was not sure what color to choose, but I chose Red to match the color of Sticker.
Installation was easy and the appearance is satisfactory for me.
View detail
Fits: HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA LEAD125, HONDA INTEGRA, HONDA GROM, HONDA DIO110, HONDA CBR600RR, HONDA CBR250R, HONDA CB750, HONDA CB400SF, HONDA CB400SB, HONDA CB250R, HONDA CB1300ST, HONDA CB1300SP, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1100RS, HONDA CB1100EX, HONDA CB1100
A balanced terminal with a very good texture
The golden balance terminal is very in line with the shape of the 30th anniversary model, which is one of the reasons why I chose it. The weight of the counterweight is very heavy, which makes the handlebar very stable when driving. It feels particularly obvious when driving at high speed. The installation is also very simple. An Allen wrench It can be done and it is installed directly without changing any places. I think the price of this model is also very cost-effective------------------------- -------------------------------- The golden balance terminal is very in line with the 30th anniversary model. reasons I chose it is very heavy, so that the handlebar is very obvious when the handlebars are very smooth and high -speed. You can get it and install it directly without changing the price of this model. I think it is also very cost - effective. Powered by Google Translator View detail
New ModelXSR900 Bar end mirror removal measures
Items for the problem of what to do with the Bar End after removing the OEM bar end mirror of the New Model XSR900.
It is specially designed for this purpose, so it can be installed without any worries. (The gap between the Grip and the Bar End will be filled.)
It is expensive, but the quality is very high because of the high price, so I give it 5 stars.
View detail
Fits: HONDA FORZA, SUZUKI GSX1400, SUZUKI GSX1300R, SUZUKI GSX-S750, SUZUKI GSR750, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA NM-4, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA CBR650F, HONDA CBR1000RR, HONDA CB650F, HONDA CB400SF, HONDA CB400SB, HONDA CB250R, HONDA HORNET900
Stabilized.
I was a little concerned about the vibration when revving up, but it was alleviated considerably and I'm glad I installed it. View detail
It was light w
I knew it wasn't Weight, but I regretted it a little bit when I put it on. View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja1000, KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI Z1000, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI 1400GTR, KAWASAKI GPZ900R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja250R, KAWASAKI NINJA400R, KAWASAKI Z1000, KAWASAKI Z1000 R EDITION, KAWASAKI Z250, KAWASAKI Z750, KAWASAKI Z750 S
Mounted on Kawasaki car
The texture of the Aluminum is very nice and the weight is perfect. Also, the overhang to the outside is not as much as I thought it would be, which is a nice touch. View detail
modern, solid
I purchased 2 aluminum billet bar end POSH and DAYTONA for 2 my bikes, the Daytona look more modern, solid, sharp line. Two size of rubber stopper included can be easily to install on handlebar. View detail
Fits: HONDA FORZA, SUZUKI GSX1400, SUZUKI GSX1300R, SUZUKI GSX-S750, SUZUKI GSR750, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA NM-4, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA CBR650F, HONDA CBR1000RR, HONDA CB650F, HONDA CB400SF, HONDA CB400SB, HONDA CB250R, HONDA HORNET900
Nice color!
I have a RedBlack CB1300 and the color is just right. I also think it reduces vibration even more than the OEM. View detail
Accent and minimum defense Up
I use it on my car KLX250es, I replaced the handlebar with zeta cx bar mx412Blue, so I bought it to match the color.
It is not only good looking, but it is also effective in protecting the throttle cone in case of a fall.
View detail
It's all about Stylish!
You can buy similar colored Bar End products from other companies at parts shops, but they look somewhat cheap. For example, what if you try to match them with baby face's Lever Guard? The other company's product would definitely look out of place.
I don't like too large size, so this is the only one I can choose.
View detail
Fits: SUZUKI GSX1400, SUZUKI GSR400, SUZUKI GLADIUS650400, SUZUKI GSR250, SUZUKI V-STROAM250, SUZUKI SV650, SUZUKI GSX-S1000F, SUZUKI V-STROAM650, SUZUKI V-STROAM650XT, SUZUKI V-STROAM1050DE, SUZUKI V-STROAM1050XT, SUZUKI V-STROAM1050, SUZUKI GSX-S1000GT, SUZUKI GSX250R, SUZUKI BURGMAN400, SUZUKI V-STROAM, SUZUKI GSX-S1000S, SUZUKI GSX-S1000
A wide variety of colors
It is inexpensive, has many color variations, and the quality is not bad.
Installation is easy with only a Driver.
It is kind of nice that it has an Adapter to match the Handlebar diameter.
Vibration isolation is not expected.
I think it is a dress-up oriented product.
View detail
Gold that fits Grom
Product Name
DAYTONA DAYTONA Bar End (SURFACE)
Item Number
99983
Vehicles
Grom ( JC61 ) 2015
Number of man-hours
5 minutes
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
When I customized my handlebar, the existing Bar End was not compatible with it, so I chose this one. Also, the price was lower than other products.
Was the one you received as per Image?
It was just like the Image. Beautiful gold color.
Was the installation difficult?
The instruction manual is included in the package, so it is easy to install according to the instructions.
How was your experience with it?
I thought the Handlebar's vibration could be reduced because it has some weight. It also served as a decent Guard when it was bumped. I am glad that I was able to re-install it without breaking it.
[Included Parts:were they on?
Nothing in particular. It came with a Handling Instruction Manual.
[Was there anything that disappointed you?
Nothing in particular, I liked the variety of Coloring.
Other items that would be helpful
Points and hang of installation/Availability and comprehensibility of Instruction Manual/Points to note/Items to be purchased together/Opinions and requests to the Manufacturer.
View detail
Fits: SUZUKI GSX1400, SUZUKI GSX1300R, SUZUKI GSX-S750, SUZUKI GSR750, HONDA PCX150, HONDA PCX125, HONDA NM-4, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA CBR650F, HONDA CBR1000RR, HONDA CB650F, HONDA CB400SF, HONDA CB400SB, HONDA CB250R, HONDA HORNET900, HONDA HORNET600, HONDA GROM, HONDA FORZA
lose weight
I know hevy weight balancer is needed to reduce vibration during long touring, but I need to reduce weight for Hayabusa, I've replaced POSH solid bar end for Haya and I've reduced the weight by 600gr (the weight of OEM balancer is approx 700gr). The spacers include can be used for mirror bar end. View detail
For those who want to remove OEMBar end mirror
No wobble at all as it is a complete Screw fit! View detail
Fits: HONDA CB1300SF, HONDA CB1300ST, HONDA CB1300SB, HONDA CB1300SP, HONDA CB1100, HONDA 400X, HONDA CB400FOUR, HONDA CBR600RR, HONDA CBR400R, HONDA CBR600RR, HONDA CB1100EX, HONDA NC700X, HONDA NC750S, HONDA NC750X, HONDA CB1000R, HONDA HAWK11, HONDA CBR1000RR, HONDA CB1100RS, HONDA PCX150, HONDA CRF250RALLY
Dress-up!Bar end plug
[How is it used?
Dress-up as expected.
Select Silver to match the car body
Was the one you received as per Image?
Vehicle is confirmed to be compatible on DAYTONA's website.
Was the installation difficult?
Easy
How was your experience with it?
Look, my eyes are better now.
[Included Parts:were they on?
Everything was there.
[Was there anything that disappointed you?
It looks a little crooked.
Other items that would be helpful
No installation point or hang/impact driver required
Availability and clarity of Instruction Manual/
Includes a detailed Instruction Manual
Notes/.
Items to buy together/
None
Opinions and requests to Manufacturer/
A little lower pricing.
View detail