Reviews
image fraud
I receive something completely different from the picture, and it doesn't even fit. [? There's no way I would do that.
If you ask The image is a common Image. Because W
What's the point of posting a picture? I don't understand what you mean.
I don't know if it will be returned Gold, but I did ship it to them on delivery.
Complete scam, very poor return policy.
I'm glad it was only a little over $6,000 worth of damage, but I will never use WeBig again! Take care, everyone.
View detail
It's not just about looks…
I don't tandem, so I removed the tandem footpegs on both sides and installed this one.
The product itself is also cool, but without Step, the Rear has become Refreshing.
Plus, the weight savings will be there!
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Quality item
Super fast shipping to the USA, safe packaging, high quality built product. Highly recommended and will but from again. View detail
Hanger
Purchased along with footpeg. It was great. View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX)
It does not fit the current model.
It does not fit the current z1000.
Since it's an external exhaust system, I'll bend the bracket a little bit and use the Spacer that's sold at Home Center to get clearance between the Silencer and Swing Arm.
View detail
Fits a CB500F Perfectly!
Very nicely made and anodising is uniform. Handsom on the bike and cleans up the rear foot peg superbly. Nice little bit of weight savings too! View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200 DAEG
I wonder if I can pimp it out.
I could have changed the angle of the Silencer, but at this price, it's not worth it. View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200 DAEG
Garbage
I bought it because it said it was compatible, but it was about 1cm shorter than the OEM and could not be installed.
I became an unburnable Garbage.
I won't buy it again.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R SE KRT EDITION
Very cool!
I bought this to go with my Earls Gear Exhaust System.
I'm very satisfied with Large because it looks very cool.
The texture is great!
However, the position of the exhaust band will be a little backward, so if you are considering installation, it is recommended to replace the exhaust band before it leaves a mark on the silencer.
One thing that needs to be improved is the need for a new bolt to hold the exhaust band in place.
The bolt that comes with the Exhaust System is too long to tighten the nut because the screw is not cut. Even if the nut is tightened, the bolt is too long and not cool...
The price is good, so I thought it would be a good idea to get a Bolt1 pc as a bonus.
View detail
Is it supposed to be OEM?
I bought the Exhaust System used and needed a Pad.
However, when I tried to install it, the rubber part was cracked…
It was subtle…
Size is perfect.
View detail
AKRAPOVICSilencer bracketKAWASAKI ZX-10RR
The shape is good
The Carbon one is more expensive and has the same shape as the NORMAL part.
I chose this one for its Design nature.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R SE KRT EDITION
Dress-up and a little weight reduction
Although I hooked Single Seat+LeftTandem, only Right Tandem Footpeg was still attached due to Exhaust Bracket.
I chose this one because I was looking for something rigid that I can install AKRAPOVICJMCA and has Slide adjustment.
It was a gamble to see if I could install it. (Lol) As a result, although the front and rear of the car body can be slid, the mounting position is offset to the outside of the car body, so it is not possible to attach the pons...
I made my own Bracket. It is installed. It became the form which pushes up a little.
The adjuster for the rear suspension was also fixed to the Tandem, but this bracket also needed to be modified to make the slide as large as possible.
The texture is high quality and satisfactory workmanship. If it is this finish, there seems to be a sense of existence with a sense of luxury even in Black. However, I think that Wound is easy to stick a little, and Wound a little by adjusting the installation position. It is a work with care...
View detail
Looks Refreshing
I bought this to remove the Tandem Footpeg to fit the Single Seat.
It is recommended to use a shorter nut (20mm or 25mm) on the body side and a rubber on the silencer side to prevent vibration.
Also, the installation requires a little hang at the three screw stops.
If you tighten it while taking Balance, you can install it.
View detail
Practical choice for texture!
After I modified the exhaust pipe, because of the angle of the modified exhaust pipe, the rear pedal bracket had to be changed and raised. But in this way, the ride comfort of the back seat becomes worse. The rear pedal bracket of this OVER RACING has the same screw holes as the original bracket, but the pedal position has to be expanded. Therefore, it is possible to slightly improve the ride comfort of the rear seat while keeping the high exhaust angle unchanged. Very good! But it should be noted that in order to install this set of brackets, the bracket adapter code equipped with my R'S gear exhaust pipe needs to be polished partly! -------------------------------------------------- -------- After I changed the exhaust pipe, because the reasons for the angle of the exhaust pipe, the post-pedal bracket had to change the angle to do raise treatment. But in this way, the ride comfort of the rear seat became poor. The back pedal bracket of this Over Racing is the same as the screws of the original bracket, but the foot is more expanded. Therefore, it can be slightly improving the ride comfort of the rear seat while maintaining the high angle of exhaust gas. However, it should be noted that in order to install this set of brackets, my R's GEAR exhaust pipe is equipped with the bracket transfer code needs to be partized! View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R SE KRT EDITION
Beautiful finish
The exhaust bracket I was using before was not strong enough, so I replaced it. This product is very strong and well made. The finish is very beautiful and I like it. The material is Stainless Steel and it is a little heavy. The finish is beautiful. The finish is beautiful. View detail
Fits: YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA YZF-R3, YAMAHA MT03
good-looking
R25 has few Exhaust Bracket, so I decided to use OVER one.
If it's an OEM Bracket Exhaust System, it will have a Large body.
View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
It can be used for OEMExhaust System without any problem.
[How is it used?
The OEM Tandem Footpeg is removed and installed.
Was the one you received as per Image?
It's a simple Aluminum Bracket and it looks exactly like the Image.
Was the installation difficult?
It's very easy.
Just remove a total of 3 Bolts from the body side and the Silencer side.
It takes less than 10 minutes to replace.
How was your experience with it?
The OEM Silencer is also AKRAPOVIC, so I think it's Exactly the right product.
If you remove the Tandem Footpeg of Both Sides and replace it with this product, it will look quite Race ish.
It is a little bit lighter.
The Tandem Footpeg will be gone, so you will not be able to ride with two people.
[Included Parts:were they on?
All the necessary parts for replacement are included and even the screw lock agent is included.
[Was there anything that disappointed you?
Not disappointing, but a little pricey for what it is.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
K-FACTORY STD Position Corresponding Aluminum Exhaust Bracket
My model: Kawasaki z900rs cafe, material: aluminum alloy welding, first-class workmanship. Effect: It is much more beautiful than the original one, which makes the car more silver and more retro. Purchase and installation experience: The installation is very simple and non-destructive replacement, the delivery time is very fast, and the goods will arrive at about 7 soon. I am very satisfied! View detail
Fits: DUCATI MONSTER 1200 R, DUCATI MONSTER 1200, DUCATI MONSTER 821, DUCATI MONSTER 1200 S
Tandem Footpeg Removal
I don't do Tandem, so this is a purchase for Tandem Footpeg removal.
Material:It's Stainless Steel so it's heavier than it looks but the footpeg removal works great.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1100
Good quality and satisfied
It was used for Silencer which is not made by Nojima.
Just fit with no problems, strong enough for what I need, good quality and satisfactory.
View detail