Reviews
Rigid and solid construction
It is easy to install as it only replaces the OEM Tandem Footpeg. It is thick and rigid enough. View detail
Silencer hanger
The order arrived quickly. Thank you for the quick response. View detail
Fits: SUZUKI GSX-S1000F, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S1000
Yoshimura silencer bracket
Quality and finish is simple perfect. It fit well as always. The stuff is delivered pretty fast n well-packaged Looking foward to buy another products. View detail
Fits: KAWASAKI Z250 (2013-), KAWASAKI NINJA250R
Race ish feeling Up!
Exhaust system is Trickster's Slip-on Silencer, but the bracket was originally installed at the NORMAL position, so it fits perfectly. View detail
Subtle…
I used it with SP Tadao's Exhaust System. For some reason, it went inside the Tandem Footpeg and interfered with the Swing Arm, so I used a 20mm Spacer to let it go outside. View detail
Quality is outstanding, but the stuffing is...
It is cohesive when used with Single Seat.
The key is that the Single Seat in M3 color is not yet available, but...
Black Anodized, Beauty, Yoshimura logo are the best without BALI, but
The important thing is that the mounting Bolt, Washer and Nut with Silencer are Stainless Steel SilverUniversal Product!
It is a pity that the silver bolts seem to stand out a little from the black color scheme, but that is a matter of personal preference.
The bolt and nut have been changed to Stainless Steel Black.
View detail
Fits: KAWASAKI ZX-10R, KAWASAKI ZX-10R RR, KAWASAKI ZX-10R SE
WSBKStyle！
Purchased to bring 10R closer to SBKStyle, looks great.
In terms of weight, it is about 400g lighter.
The bracket itself is good, but the surface treatment of the attached Bolt is cheap and I am considering replacing it.
View detail
It's pretty good!
It is very lightweight and beautifully made, but it needed a color to be installed, probably because of the compatibility with WYVERN Exhaust.
Installation is easy, so even beginners will find Large sturdy.
View detail
![Exhaust Hanger [Exhaust Bracket]](https://img.webike-cdn.net/catalogue/images/50737/22636928_3_TS.jpg)
Fits CB250R 8BK-MC52.
CB250R 8BK-MC52.
Rear short fender and matching Rear short fender because I don't do Tandem.
R &G exhaust hanger was installed.
BEAMS R-EVOSlip-on Silencer when a compliant product is available.
We are planning to install a Stainless Steel silencer.
We thought of a cool silver as one point on a pure black car body.
Purchased
WeBig was cheaper than other stores.
It's a rare thing, isn't it?
There is no gap in the OEM exhaust system hole location for installation.
The OEM bolt is tightened with a devil's torgue, so when removing it
"Boom!" I'm a little bit Biglit because it rings with
No weight reduction effect is expected.
The OEM Tandem Footpeg cum Exhaust System Hanger is also quite light.
The Bolt that comes with it is M8×20 Silver, but
Replaced with Stainless bolt in Black color.
I don't think Cost performance is good.
To say the least, 14,000 yen is expensive.
View detail
daytonma Exhaust Bracket For Right
About quality and texture I think the quality is really good About the feeling of use Incorrect length measurement but fitted to exhaust clamp bolts. Products to buy together An exhaust clamp with m10 bolts is required Difficulty of installation easy, simple Cost performance and comparison with other products I think the product is the best for the company that makes the exhaust, but I think it is a well-made product in various ways About shipping and packaging It took a week and the packaging is excellent Any concerns, cautions, or advice when purchasing We need to measure the length properly and choose I needed 150mm, but I chose 175mm, but 125mm was the correct answer View detail
Tandem Footpeg removed and replaced
It was replaced together with Exhaust System replacement.
I am satisfied with the lighter weight than OEM Product.
View detail
![[Repair / Optional Parts] Silencer Bracket](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0251/24232620_1_TS.jpg)
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
For AXIS Labs fans....
The AXIS Labs Bracket was installed to match the OEM AXIS Labs Exhaust System, and if you don't need a tandem bracket, you should definitely install one. The price is a bit expensive, but it is a good deal. The price is a little bit expensive, but it is a reasonable price considering the fact that the installation is very easy since it is just a matter of replacing the OEM tandem footpeg. However, when removing the tandem footpeg, you will need to remove the tandem footpeg on the opposite side of the exhaust system, so you will need a racing hook and a blind cover separately. View detail
To convert to Single Seat
Tandem footpeg is removed and installed for single seat conversion.
Black for a clean look around the Rear
View detail
Good on Race ish!
The Ikazuchi Exhaust System was installed in time for the replacement.
The change from the Tandem Footpeg will result in a weight reduction of the vehicle body.
The bracket itself is lightweight, but it is strong and will not bend unless it is subjected to a strong external force, such as a fall. I am very satisfied with the product itself, but I think the price is a little high.
View detail
The product itself is good, but ...
Material:I understand that this is a carbon product and that some modification may be required for installation, but the mounting holes on the frame side are obviously small (the bottom of the neck of the normal bolt was jammed, so I had to counterbore it).
The Exhaust System side also has a smaller hole, but this one has been penetrated.
If the OEM Nut is to be used, the Pitch should at least be matched, otherwise the Nut should be the same as the OEM Bolt. If you use the OEM Nut, you should at least match the Pitch, otherwise the Nut should be the same as the OEM Nut. If you use the supplied Bolt, you can get the corresponding Nut at a hardware store.
The quality of the bracket itself is not a problem, so I think the Style will be better, although it is conditional on someone with some modification skills and installation knowledge, or ask a PRO.
View detail
Exhaust Bracket for SR400 FI Vehicles?
SR400 1JR (1995 model) I purchased the bracket for the "BALI" but was not able to install it.
The OEM parts number varies depending on the year, but I thought it would probably be possible to install, but I should have checked better.
The reason for the high rating is because of the good workmanship of the GOODS products and the speed of shipping by Webig.
We strongly recommend that you check the square shape of this product carefully before purchasing it.
View detail
Race ish feeling Up.
Since I use my ZX-6R (2012) only for circuit driving, I don't need a Tandem Footpeg, so I installed this Exhaust System Hanger. When I bought the Hanger, there was a Valter Moto Emblem between the square holes of the Hanger, and without the Tandem Footpeg, the Hanger looks Race ish and Refreshing. It fits perfectly with YOSHIMURA's Exhaust System and has good accuracy.
Also, as far as I know, it is a violation to remove the Tandem Footpeg without permission. I had to go through the vehicle inspection first. Structural Change and the vehicle has been inspected. Those who drive on public roads, please be careful just in case.
View detail
It may be a little incompatible with YOSHIMURA's Exhaust System.
I purchased an Exhaust Bracket for my cbr250rr YOSHIMURAR11 CYCLONE. I bought an exhaust bracket for my cbr250rr yoshimurar11 cyclone. If the bracket that connects the Slip-on Silencer to the Exhaust Bracket can be slightly shaved, the quantity:2pc. I am very happy to have the Screw in one hole as it is not the Exhaust Bracket from YOSHIMURA. I have been using it for about a month now and so far it works fine. The design of the product is cool and very stylish on the tail side, and I think it has a great dress-up effect! The price is a little bit high, but it's a … View detail
Fits: KAWASAKI Z250 (2013-), KAWASAKI NINJA250R
Wow that's cool
It's cool!
Recommendation!
By all means.
View detail
Fits: KAWASAKI Ninja250, KAWASAKI Ninja400
Suitable for Circuit driving
I use YOSHIMURA's R11, but since YOSHIMURA's Exhaust Bracket has been discontinued, I bought and used Over's one.
Since it says in the product details that the OEM Exhaust System is also compatible, I thought it could be used on the YOSHIMURAR11, which is fixed in the same position as the OEM, and the result was that it was successfully attached.
Since I use the Exhaust System for circuit driving, the collar connecting the Exhaust System to the Exhaust Bracket is a bit of an obstacle for hang-offs. Therefore, unlike the Instruction Manual, I put the collar on the inside of the exhaust bracket, although it is a bit unreasonable.
View detail