Reviews
Fits: HONDA Rebel250, HONDA Rebel500, HONDA Rebel300, HONDA Rebel300
Increased stability
Narrower Side Stand,
Purchased because it was unstable depending on where I parked.
It is thicker and more stable.
Installation was easy, but a Hexagonal Wrench is required.
The size of the Hexagonal Wrench was not mentioned in the product instructions, so that is a point of dissatisfaction.
View detail
Japanese Vehicle Inspection Correspondence, but it is totally different from NORMAL Silencer.
As for the replacement, is the mounting angle optional? It would be helpful if the Adapter and Silencer had some markings on them.
I really like the size and design of the product, and it would be great if I could feel the difference in Power afterwards.
View detail
Fits: HONDA Rebel1100 DCT, HONDA Rebel1100
Good texture
The sound is not so different from the NORMAL, but the bass is elegant. It has a pleasant two-cylinder sound. It looks much better than the NORMAL. If you like large sound, this is not for you. View detail
Fits: HONDA Rebel 1100, HONDA Rebel500, HONDA Rebel250, HONDA Rebel300, HONDA Rebel300
Position will be easier.
After the installation, the position of the handlebar was dramatically improved, especially the upper body became easier. It is easier to install the DAetc. However, when the Handlebar is cut to the full Left position, the gap with the Tank is very small, so I think it is necessary to be careful when attaching attachments around the Handlebar. View detail
Fits: BMW R1250GS, BMW R1250GS-ADV, BMW R1250GS HP, BMW R1250GS-ADV HP, BMW R1200GS, BMW R1200GS-ADV, BMW R1200GS Rally
There is a reason for the price!
It's pricey, but it seems to use a very strong material.
I moved the Motorcycle a little with the Side Stand on, and the Concrete on the Garage was shaved. Of course, installation was easy.
View detail
Fits: BMW R1200GS, BMW R1200GS Premium Line, BMW R1200GS Rally Premium Line, BMW R1250GS HP Premium Line, BMW R1250GS Premium Line
If you don't mind the price...
I bought it to bulk up the height rather than the width of the seat.
The side stand makes it much better to lean when stopping.
I am satisfied with the quality of the product. Installation is easy with only 3 Bolts.
The drawback is its price, which I knew before I bought it.
Opinions differ as to whether one can afford to pay about 15,000 yen for Side Stand clogs.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE KRT EDITION, KAWASAKI ZX-25R SE
have one's feet hit against the ground (e.g. when someone's foot is on the ground)
I had been using a Fixed Type Bracket from the same manufacturer, but my feet were hitting it, so I replaced it with a Slide Type Bracket.
I had to use a bracket on the Fixed Type because the angle was not right, but here I was able to attach it directly.
However, even with this product, the Step work itself is possible, so it continues to be used, although it hits slightly.
YOSHIMURARear Sets to stand around the ball of the thumb, the foot is 27cm and in the photo.
The design and texture are good, but the included Bolt for the Exhaust Band looked like it was floating in Silver when it was Black, so I replaced it with Universal's BlackBolt.
View detail
The actual product was moderately good.
I didn't like the angle of the Exhaust System and Silencer's Emblem, and I wanted a 4-1 set Exhaust System, but 8BL compatibility was the only choice, and I bought it because it was cheap on Sale.
When I saw it in person, the angle of the Silencer was exquisite, and the Emblem was finished in a way that I thought was okay.
The catalytic converter is a little fuzzy in places, but not enough to be a problem, and it is not difficult to install, but when I temporarily assembled it, I was a little nervous because the exhaust pipes were quite different where they should have been aligned.
When I started the engine immediately after installation, I could see the difference in the smoothness. The volume is just right and not too loud.
Flange nut is OEM new purchase use is recommendation. I was surprised to find that the nut seat that is attached from the beginning is not brand-new and has a geshi geshi.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R SE KRT EDITION
Diversion to Trickster
Good design and used with TricksterFull Exhaust System.
The holes were not aligned with those of Trickster, so a bracket with 40mm between holes was used.
The weight is about 260g, which is lighter than the OEMfootpeg, which weighs about 500g.
I feel the logo is too assertive, so Plain would have been even better.
View detail
Even beginners can easily install the Hexagonal Wrench! But be sure to degrease it carefully!
Installation is easy, just a Hexagonal Wrench. The only thing you need to do is to pull on the Chica La when fixing the Spring. (Spring puller is also included in the package.)
I bought it because I liked the sound, but when I'm driving, the sound of the After Fire popping is very small.
As far as I can tell from my Net search, the AfterFirea sound is not a problem because it is intentionally made that way by the manufacturer.
View detail
It is easy to install. It's not too loud and a little thicker.
It seems a little thicker than NORMAL.
It is easy to install.It is lighter and I am happy with the look.
I feel that the low to mid speeds have been extended.
Personal Thoughts.
View detail
Fits: HONDA CB1100 RS, HONDA CB1100 EX
Quiet sound
If replaced with Show Rai Battery, a weight reduction of 10kg can be achieved.
I think CB1100EX is effective.
It looks good
It is also good that Center Stand is available.
Installation should be left to PRO.
Idling is now quieter than OEM.
Quiet but good sound at high rpm.
Gasket should be prepared.
View detail
Earls GearFull Exhaust System is the best!
I have no complaints about the accuracy of the product.
The lightness is exceptional!
I think it is inevitable that the price is somewhat high due to the materials, build quality, etc., but I hope it will be a little less expensive.
View detail
Fits: HONDA CB1300SB, HONDA CB1300SF
Style is outstanding!
I installed this on a 2016 CB1300SB. The color is great and the look Parenthesis is outstanding.
The sound is not too loud from Idling, and from 3000 RPM, the sound is very parenthesis, like a sound that hits you in the stomach. However, I was expecting the sound to be a little more Large, but it is a good thing that it is so gentlemanly.
There is one point of concern:When I tried to install the exhaust band according to the instruction manual, the exhaust band touched the rear suspension, so I put a few washers between the body mounting area and the exhaust band.
View detail
Fits: HONDA CB1300SB, HONDA CB1300SF
It's looking good!
Looks very Cool!
The volume is quieter than OEM, with no clutter.
It is truly "Gentle".
For those who find OEMs too noisy, this is a Recommendation!
View detail
Fits: BMW R1200GS, BMW R1200GS Adventure, BMW R1250GS, BMW R1200GS, BMW R1200GS, BMW R1250GS Adventure, BMW R1200GS Adventure
It was the right decision to buy it.
I myself am not tall, so my arms were fully extended in the Normal position.
Touring at high speeds also caused fatigue in the arms and shoulders.
I was a little worried because the parts were quite expensive, but it was the right decision to purchase Large.
After the installation, I immediately went on a day trip of about 500 km for a high speed touring,
There was no fatigue at all from the positions.
It is amazing how much difference it makes even though it only changes its position a few centimeters in front of and above!
This product may be especially recommended for those who are in the early 170cm height range.
The only demerit was that Wiring and Hose are Bolt On, which does not require replacement,
I am worried that the clutch hose will be too tight if the handlebar is cut all the way to the right.
This area may vary from vehicle to vehicle, so I would go to a Motorcycle shop even for an inspection.
I will consult with my mechanic.
View detail
A perfect exhaust system that is expensive but satisfying!
The silencer design is also good. The volume is quiet with Japanese Vehicle Inspection Correspondence.
The handling becomes dramatically lighter, and immediately after the replacement, the Torque is felt to have increased.
As expected of Earls Gear!
The price is high, so be prepared when purchasing, but I don't think anyone will regret installing it.
View detail
Fits: BMW R nineT, BMW R nineT Pure, BMW R nineT Scrambler, BMW R nineT Urban G/S, BMW R nineT Pure, BMW R nineT Scrambler, BMW R nineT Urban G/S
It is effective. However, there are some things to watch out for.
The unnatural collapse when the Side Stand is applied has been eliminated, and it now looks natural.
The installation itself is easy, but there is a Point to attach it properly.
The Side Stand must be completely floated to properly align the floor ground contact surface of the product and STAND.
It is better to use a Center Stand or have someone support the Motorcycle.
Screws are too short, so screw lock agent is necessary.
The product is a heavy lump of Gold; depending on where you place the Motorcycle, it may scratch the floor.
View detail
Satisfied with both sound quality and volume
Installed on a 2008 W650.
I am not confident in my work skill, so I asked Motorcycle store to put it on.
The sound quality and volume were just as I expected, and I was grinning all the way inside the Helmet when I drove immediately after installing them. I am satisfied with the Large. I have only driven about 100 km, so I will enjoy it slowly from now on.
View detail
Fits: KAWASAKI W800
I think it's generally good.
The installation itself is easy, but the OEM rubber on the center stand stopper is large enough to fit.
I gave up and made it myself by buying various things at a hardware store.
The Others are generally satisfied.
View detail