Reviews
Fits: HONDA PCX125 JF56, HONDA PCX150 KF18, HONDA PCX125 JF56, HONDA PCX150 KF18
Exhaust System replacement
I replaced it with YOSHIMURA's Exhaust System to see if it would have some effect. I was surprised to find that the overall acceleration was smoother and more effective. View detail
z900rs cafe handle up
z900rs cafe installed this handle.
When traveling long distances, the posture is comfortable.
The included clutch cable and throttle cable fit well.
However, the brake hose must be extended.
I installed it with a swage line.
A comfortable posture makes your trip more enjoyable. -------------------------------------------------- -------- Z900RS CAFE installed the handle. When traveling in a medium to long range, the posture is comfortable. The enclosed clutch cable and throttle cable fits well. However, the brake hose must be extended. I was installed in the Swage Line. The trip is more enjoyable in a comfortable position. Powered by Google Translator
View detail
Fits: YAMAHA SMAX, YAMAHA Majesty S, YAMAHA SMAX, YAMAHA Majesty S
Slide Piece
Ride quality has improved.
Good acceleration and good around to Top.
The Slide Piece is easy to break, but it is a Single Item and there are no Parts, which is disappointing.
View detail
Compact, but pricey!
[How is it used?
It is used on a 5-inch CYGNUS X. This Mount has a Smartphone Mount attached to it.
The Smartphone Mount uses SP CONECTO from DAYTONA.
Was the one you received as per Image?
I have the impression that I received something with a Beauty finish rather than an Image finish (laugh).
To be honest, I thought the quality looked really bad from the product images.
The paint itself was beautifully finished, with weld marks and other marks clean, as if it had been improved.
How was your experience with it?
I am satisfied because it is very Compact and as close as possible to the shape I wanted.
The compactness of the mount is good, since a bulky mount around the handlebar is tacky for a scooter.
The strength seems to be OK, and since it is 22.2Φ, I think it can mount most large items.
[Points to note]
Nothing in particular, but if you mount something too heavy, the smallest size& fixed point will be at the edge.
I don't think you should mount anything too heavy in terms of Size.
How did it compare to other products?
It is Steel, so it is by far the strongest. I wanted something cheaper, so I searched quite a bit.
All the cheap ones are Material:I am still concerned about the strength of this product in aluminum.
However, I can live with it because the product is good, but I think the price is too high for this product.
Conversion collars can also be purchased cheaply from KITACO or Posh, so there is no need to go out of your way to get one with a color.
View detail
Fits: KAWASAKI KH400, KAWASAKI KH250, KAWASAKI 350SS, KAWASAKI 400SS, KAWASAKI 250SS, KAWASAKI KH400, KAWASAKI KH250, KAWASAKI 350SS, KAWASAKI 400SS, KAWASAKI 250SS
OEM Discontinued
Buy ClutchBoltOEM discontinued.
I would like to thank the manufacturer for selling these bolts.
The tightening Torque is also specified and seems to be safe to use.
View detail
It got easier to ride
I chose this product to make my Z900RSCafe an Up solder. The length of the wire and the brake hose was not enough, so I prepared the OEM RS hose and installed it.
Since there is no hole, it opens with Drill.
I couldn't use the AxelLong wire for Cafe from Musashi-san because the wire is too long no matter how I try;
View detail
Even with Normal cable.
Drilling holes is required.
Normal cable and Wiring can be installed without Clamp, but it needs to be adjusted.
When you cut the Handlebar, you need to be especially careful to avoid interference and adjust it many times.
The Position is not too narrow than Musashi Kai Fat bar, so it is more suitable for touring than mountain pass Spec.
Since the Handlebar is narrower than the NORMAL, the OEMMirror jumps out of the Handlebar quite a bit, so replacing it with a Short mirror is Recommendation.
Don't forget to buy and exchange Bar End.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Inhalation Up
I bought it to get a little power up.
I've used M-Soul's Filter in other companies' species, so I chose it again this time because of its reliability and performance.
There is an error in the size of OEM and a little large, but it was able to be installed without processing etc.
I don't know how this one performs because I've been playing around with other things, but I think it's more or less effective.
View detail
Fits: YAMAHA SMAX, YAMAHA MAJESTYS
Weight Roller for LEVEL10
Quantity of Weight Roller:Pair (for Left and Right) Since there is no difference between
It's GOOD that you don't have to worry about the direction.
Just the weight (g) is listed on the Roller contact surface, so
It's a shame that it disappears after use.
View detail
Fits: YAMAHA MAJESTYS
Consumables.
It has 20,000 miles on it since the last time I replaced it, so I replaced it this time.
I feel like the intake efficiency is better than the OEM product and the power goes up, so I'm replacing it with the Repeat.
I will replace it when it has another 20,000 miles on it.
View detail
Fits: HONDA PCX125 JF56, HONDA PCX150 KF18, HONDA PCX125 JF56, HONDA PCX150 KF18
I installed it on my ThailandHonda Click125i
Can be used directly with the OEMAir cleaner case Replace Air Filter
It is sold for the PCX125, but the same type of engine is installed in the I installed it on my ThailandHonda Click125i
Scooter custom has quite a lot of correlated Parts, and it's harder than you might think!
Increase the cruising speed with the High Speed Pulley and get a faster start with the Weight roller The OEM exhaust system and air cleaner will be used when the shift speed goes up Then you will not be satisfied
Good point? The good thing?
Since it is the same shape as the OEM air cleaner, it is completely mountable to the bolt No trouble at all for installation
It takes less than 10 minutes to replace it as it only requires a few screws to be removed and installed
Good point? Sticker comes standard for cheap
I'm happy to say that Sticker is included in the standard package LEVEL 10 Sticker of, I like it I put it on my OEMAir cleaner box
I have a DAYTONA High Speed Pulley + Weight roller, a This air cleaner is installed with the BEAMS exhaust system I did
The maximum speed and cruising speed are increased and the shift speed is increased by changing the weight roller It was in a higher state than the OEMs, and I feel that the high RPM growth has improved, especially at higher RPMs
The intake sound is also louder than the OEMAir cleaner Custom made You'll also get a W
PCX's Air cleanerBox is commonly known as the "Pig nose" There is a part that adjusts the amount of air intake, called the "Part", and you can't take in much air if you don't So recommending that they be removed together
View detail
Fits: YAMAHA Majesty S, YAMAHA Smax, YAMAHA Majesty S, YAMAHA Smax
Very good product
We were told it was a made-to-order item, but it was sooner than we expected, and definitely at a specified time
I felt very comfortable doing business with you
I haven't installed it yet, but the quality is great for the price
I can't wait to see the results of the installation
View detail
Fits: YAMAHA S-MAX, YAMAHA Majesty S., YAMAHA S-MAX, YAMAHA Majesty S.
RACINGPower Filter ?
I purchased it and tried installing it as good from the same Motorcycle ride.
I told you to Speedup when I heard it, but I did not change the highest speed
Speed ??Speed (Response) I can not feel it
I think that suction is better than OEM, but I do not understand well.
Inhalation by experience up to now (Suction) Although improving acceleration will improve fuel economy if it does not connect to the highest speed
Because NORMAL is 3000 kilos and it is dirty, I wonder if it was good for replacement
I will try various filters in the future
View detail
Fits: YAMAHA N-MAX, YAMAHA NMAX155, YAMAHA N-MAX, YAMAHA NMAX155
very good
The product itself is very good, but it is regrettable that there is no installation theory etc. I installed after installing it with Net, but I think that the work itself is very easy and it will end at around 1 o'clock. Well I am impressed, but I feel that the acceleration power has increased. I do not know because I do not try the fastest View detail
Fits: YAMAHA MAJESTYS, YAMAHA SMAX
It looks much better than bulb exchange
It is slightly expensive, but it looks much better than replacing the light bulb with an LED, and visibility is good.
The LEDs are arranged in two rows, but there are two more grains on the upper stage and three grains on the side, and the quality was perfect if you put the LED there.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA S-MAX
I feel like getting faster
The price is about twice the OEM, but it is not so expensive
Buy with Sports Type.
I do not know the difference between running fee Ring and OEM, but I feel that Pulley's sound has become faster as it sounds outside
View detail
Fits: YAMAHA MAJESTYS
I think the performance is good
Compared to OEM obviously the power rises so I felt satisfaction.
After exchanging 3000 kilometers at OEM, after exchanging Level 10 and then seeing the Filter after 3000 kilometers, there was not much dirt and the OEM was so dirty at the same distance, so I thought that maintenance was necessary because the dust collection performance was inferior
For some reason MAJESTYS and SMAX same ProductNo but unknown if the price is about 1000 yen different
View detail
Fits: YAMAHA MAJESTYS
Easy to wear
MAJESTYS 'Feel Tar has become dirty so I replaced it. It looks exactly like K & N as it is in other impres. Because Main's CBR 1000 RR is K & NFilter, Maintenance kit seems to be usable.
Fitting was not bad. But Material : Because it is Rubber, it seems to be a little hang to cover it so as not to slip out of the groove.
There is no particular change in Fe Ring.
I hope you can keep it for a long time.
View detail
Fits: YAMAHA MAJESTYS
K & N entirely
It's an OEM Replacement Type so it's easy to install. The big difference with OEM Product is that the surface area of ??Filter itself is Small (The turning wave is rough) & Impression that my eyes are rough, so I am convinced if suction efficiency is good. As K & N looks exactly like K & N's Filter maintenance kit can be used? After installing around the neighborhood... With high rotation "KOOOO" (Intake sound) The impression that Large became somewhat louder, the amount of inhalation seems to have increased.
Fee Ring may change due to rebuilding. Because it is inexpensive, it may be incorporated into one of the processes of Tuning.
View detail
Fits: YAMAHA MAJESTYS
Intake efficiency Up
Because OEMFilter was dirty than expected, I made it Filter which can expect Power up if it exchanges the same.
After exchanging, the feeling of improving racing improved, there was a time to after fire at AxelOff, and the fuel injection was adjusted with Injection controller.
The amount of air inhaled is more than NORMAL.
View detail