Reviews
I put it on because I made a Fender Eliminator.
I customized it at the same time as the Fender Eliminator, so I don't know how much mud it splashed before the change, but it was probably better than the NORMAL. The back and the License Plate were just about sloppy on wet surfaces, but I don't think it splashed on my back. The RearSeat has some spots of mud on it. View detail
Looks good!
I think it is good because it is easy to tighten up the look just by putting it on!
Just a little cheaper would be nice lol.
View detail
Seat belt
The design of the Bracket is better than that of the NORMAL Belt, with more decoration. View detail
Size is perfect and easy Custom!
Although the Parts can easily be used as they are.
Version up by wrapping or painting!
These are the same Parts as OEM. They also look the same!
View detail
ARCHI Stem Steel Emblem & Mount stay set
Was the one you received as per Image? The product was exactly as shown in the Image.
Was the installation difficult? It was easy to install.
How was your experience with it? No problem, sir.
[Included Parts:were they on? No problem, sir.
[Was there anything that disappointed you? No problem, sir.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Change rodRetainer
It was hard to get into gear at high rpm and above 2nd gear, but now it is a little better. Installation is easy. The product is highly accurate and casually customizable. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Long driver required for installation
Long tail and this product in Quantity:Purchased as a set
I am an amateur and was able to install it smoothly, but as the Title says, a long driver is required.
I was fortunate enough to have one, so I was able to install it without any problems, but if you don't have one, I suggest you get a Long driver before installing it.
After installation, the Tail and Fender are gone, and the Refreshing and Parenthesis is good.
View detail
Installed on a 2019 Z900RS
I had installed Kawasaki OEM Radiator core guard, but when riding in the rain or on wet road surfaces, the center of the Radiator was dirty with small stones, mud, etc. on the top and bottom. Also, because the mesh of the core guard is large, the core was often clogged with small stones and other debris. This Radiator core guard has a smaller mesh at the center and a smaller mesh on the SIDE compared to the OEM, making it much harder for small stones, etc. to get into the core. However, the attachment to the Radiator is not as solid as the OEM, and the upper side only hooks onto the Rubber, and the lower side is only Bolt1 pc, which is a little worrisome, but it is not unstable, so I am satisfied with it. It looks better and Parenthesis is better. View detail
For a little Accent
The product is completely for appearance only, but it gives a Custom feel.
It would have been better if it were a little cheaper.
I am satisfied.
View detail
Arch Long tail cowl
You are right to buy Archi rather than DOREMI. z2Tail lamp and SlightFender Eliminator Kit are also Quantities:If you buy from Set, you can work on it without worrying. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
For ArchiSlightRear FenderLong tail
I was able to Custom it with no problems. If you are installing an Archie long tail cowl or Archie z2Tail lamp, definitely buy this. View detail
Archi Rear Fender
About quality and texture Hard plastic material used. Feels like able to restand small pebbles. Some scratch marks noted when item is received as it is not painted. I wrap with certain area with sticker. About the feeling of use Able to reduce splashes more then the stock fender. Difficulty of installation About less then 20 minutes. But my mechanic had to remove the exhaust muffler as one of the screw in hard to reach. Cost performance and comparison with other products Price is reasonable compare with the rest of the non painted fenders out in market About shipping and packaging Comes in a big box so shipping price is expensive. Well wrapped in plastic bubbles and paper. Any concerns, cautions, or advice when purchasing. Expect a few scratches on the item as it's not painted. There are design holes for easy lubricantion and cleaning on the chain guard area View detail
Steady making
I had an experience with an Aluminum Fender Eliminator on another car and the vibration caused a crack on the number mount, so I decided to use this product.
Installation is also easy. I thought it was unstable because only one side of force can be applied around the axis with the Ratchet.
Well, that may be experience and skill in that area.
The product description said it was about the same weight as the NORMAL, but … I'm not sure.
It is quite heavy. You can clearly see it. But it may be good if you think that it is well made for the cost.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
no problem
Until now, the parts were made by MORIWAKI, but since the peripheral parts are archi, we decided to align them.
The unique design looks good and cool after all.
The price is not cheap, so tastes may differ.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RSCAFE, KAWASAKI Z900RS, KAWASAKI Z900RSCAFE
Needle bearing is good
This eliminates rattling of the shaft, which increases the sense of Direct.
When assembling, WAKOS Grease was applied to the bearing.
Once assembled, they are basically never removed.
The Z900RS has a long shaft due to its structure, so it is not possible to support it.
Seems effective.
View detail
Little bit disappointed
I am a little disappointed in the quality of the marigold finish on the rearsets and frame connectors. I have had them on the bike for a couple of months. The anodizing is already starting to discolor. The quality of the parts is good, and I love the look. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
High quality.
[How is it used?
Very good
Was the one you received as per Image?
It is more luxurious than Image.
Was the installation difficult?
Pin stuck.
How was your experience with it?
Very good
[Included Parts:were they on?
It came with a Clear Seal for protection.
[Was there anything that disappointed you?
I couldn't get the Pin out.
[Note]
When removing pins, it is better to cure the product and the tank cap.
View detail
![Radiator capCover ver.Z [Webike only].](https://img.webike-cdn.net/catalogue/images/118983/189WB2141_TS.jpg)
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Parenthesis is casually good!
I had been interested in Radiator Caps for a long time, but could not find one that I liked, so when I saw this product, I thought this was it and bought it immediately!
The price is a little expensive, but I think the quality is good, including the fittings!
View detail
Well, good!
The material color is black, and it is an unpainted product. It is
Therefore, it is not pure Black.
If you just want to Black this place, buy it.
The others are expensive and a pain to install.
The accuracy of the puckering is excellent, but double-sided tape looks like it should be Plus.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
It is a good salve.
Initially, I was told that it would hit the Tank and scratch it, so I waited until a replacement arrived, but it finally arrived and I installed it immediately.
Punch used 3mm, and after hard hammering it out, it was finally replaced, and the Bolt was also changed to Titaniumium black since it was Black.
It feels a little hard to close the fueling port.
View detail