Reviews
CALI Seal
When CALI seals are affixed to the License Plate, the adhesive residue can be a problem when replacing the seal. In the first place, due to the excessive number of registered vehicles in some municipalities, the number of letters on the plate may be too many, and the plate may be covered with the letters, making it difficult to affix the seal neatly.
The product in question is just a Plate that provides a dedicated place to affix a CALSeal next to the License Plate.
It is a simple Level product that some people can cut out of steel or acrylic plate and make themselves.
However, when I picked up the product, I found it to have a nice texture, and considering the time and effort required to make it myself, I think it is an easy and cost-effective product.
However, I am a little afraid that I might scratch the Dustclothetc. when wiping it off when washing the car.
View detail
Slight appearance change
I was looking for a Case to put my CALI certificate in and happened to come across it in a search and it was cheap, so I bought it.
I didn't like the position of the Sticker on the local number, so I'm glad I chose this one.
It is a product that is only for appearance, but I think this kind of product is also interesting and White.
View detail
Fine material seat covers
Honda Zoomer seat (ruckus nps50) reupholstered and it looks sleek. Waterproof. Too bad they are not available from Honda, but they are certainly a good way to upgrade your saddle if it is broken. -------------------------------------------------- -------- Chair of Honda Zoomer (Ruckus NPS50) again dressed and it looks tight. Waterproof. Too bad they are not available from Honda but certainly a good way to upgrade your saddle when it is broken. Powered by Google Translator View detail
License Plate Light Measures
Wiring is quite thin, so Quantity of Wiring to Gibbon terminals.:I plugged and crimped 2pcs. The brightness is just right for illuminating the License Plate. I think the durability is the only thing left to be considered. View detail
Integrated Aluminum Bar End
The rubber grip has deteriorated and rotted, so I replaced it with this one, which can be easily removed by spraying some parts cleaner in the gap between the grips. I think the durability is good, but the cost performance is very good. View detail
Good budget mirrors with a better viewing angle
About quality and texture, I can confirm that the quality is good and that the material used is aluminum alloy that has been machined to shape. About the feeling of use, These mirrors are less instrusive then the original mirrors and when fitted to the bike also offer a better viewing angle from their convex designed mirror. Products to buy together, While working on the handle bars it would be advantages to also add a set of more comfortable grips to your cart. Difficulty of installation, I can say the fitment of the bar end mirrors for my installation was very easy due to the simplistic design of how the mirrors secure to the inside of the handle bar pipe. Cost performance and comparison with other products, The pricing of the product is great. You receive a set of bar end mirrors that are of good quality and a great look. The pricing of the majority of the other bar end mirrors available are much higher for similar product. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Absolute peace of mind
The Dress-up is inexpensive and can be easily installed with a simple snap-on installation. Together with MADMAX Aluminum Bar End Caps, the front area is fully protected. View detail
StylishItems?
[How is it used? ZOOMER
Was the one you received as per Image? Yes
Was the installation difficult? No
How was your experience with it? fashion-conscious
[Included Parts:were they on? Yes
[Was there anything that disappointed you? There is none
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Better than expected
Handlebar is HURRICANE's Forward Conti2.
Installed more securely than I expected.
The curved Mirror has a wide viewing area, but the size is small, so it takes some getting used to to get a sense of the distance.
To be honest, I wasn't expecting much, but now that the Handlebar area is Refreshing and Parenthesis has improved, I'm satisfied.
View detail
Cheaper than buying OEM Product
I bought the cheaper one because the OEM product is 5 times more expensive than the OEM one. View detail
It is bright. And it works without a glitch!
[How is it used?
We were the first to replace all NORMAL bulbs with LEDs.
Was the one you received as per Image?
I thought it was a little cheesier than Image.
Was the installation difficult?
It is easy, because all you have to do is replace the bulb.
How was your experience with it?
It was a SocketOn on a CB1100.Wiring was no problem and it is nice and bright. The durability is also no problem even after 6 months.
When I first used it on another car, I put the Brake Wiring and the normal PlusWiring on in opposite directions, so I could hardly feel the difference between the Brake and normal lighting.
I have seen similar descriptions from other impresarios, but I think this is a symptom of when the Brake wire and the normal Plus wire wiring is reversed.
[Included Parts:were they on?
There are no Included Parts:other than the bulbs.
[Was there anything that disappointed you?
So far it is bright, reduces heat and Watt number, and has no durability issues.
Tail lamps are easy to use when changing to LED bulbs, and are a great recommendation because they are inexpensive and have a large effect.
View detail
ledHeadlight Bulb
Because I can see the Black part.
I think White would have been better.
View detail
Purchase for now.
[How is it used? For ZOOMER
Was the one you received as per Image? Yes
How was your experience with it? We have not used it yet.
[Points to note] None
How did it compare to other products? The coilovers are from the same manufacturer, so I thought it would be safe.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Used to disc ZOOMER!
[How is it used? Used to disc ZOOMER
Was the one you received as per Image? Yes
Was the installation difficult? Used for disc 200?
How was your experience with it? No problem.
[Included Parts:were they on?
[Was there anything that disappointed you? Separately.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
I would like to season Clutch with future Custom
Although there was no necessity to replace the clutch, we replaced the clutch out of curiosity while replacing the Pulley and V-belt. A special tool is required to remove and install the clutch, but as long as you have the tool, it is easy to install. I had not understood the structure of a moped's clutch until now, but I think I understand the structure and mechanism of the clutch by installing the clutch. At first, I thought that I would replace the clutch at a later date and enjoy the changes caused by replacing only the former, but it became troublesome to repeat the process, so I ended up replacing them all at the same time. Therefore, all the impressions are those of the replaced parts. The connection of the clutch when starting is the same as OEM and Large. The top speed has been increased from 63km/h to 69km/h. The engine power will be increased in the future. The power of the engine is scheduled to be increased in the future, so we would like to change the clutch parts and season it accordingly. View detail
Just enough to give it a try.
I installed it on my Yamaha Max star125.
It is written as for ZOOMER, but you only need to process it with wiring, so you can put it on any car model.
It's quite bright.
I'm not sure how durable it will be, but it feels like it's installed
It's nice and compact.
I'm wondering if it's durable.
View detail
It looks smaller than the Size sign.
10.Plating and texture are good. View detail
Stylish.
A part of Seat was torn and the Sponge was torn after 5 years of neglect, but this Cover makes it back to life. Just put it on the cover and you can enjoy the fashion with the color of Piping and the color of car body.
However, you can't cover it with Exactly as much as the product photo, so the Bellows is a little bit visible and it looks like an afterthought.
View detail
Rin Parts Front Fender
First time order from this brand, the product is in good finish but still a little touch up to make it mirror finish or in my case i make it carbon fiber look with sticker. The price is reasonable. For installation if the fender can make a little bit larger on both side and make a hole in order to tight it with zip i think will be more secure. I definitely will recommend to others. View detail
grip
The Sponge grip is nice and comfortable!
Nicknamed PlatingHandlebar, it matches well!
Any Sponge grip is great for people with large hands because it becomes thicker I am!
View detail