Reviews
CLEVERWOLF Tank protector 2019mod. 2BL-SC54
2019 2BL-SC54 I installed it on a CB1300SB and it was Exactly in Tank shape. View detail
The construction is good, but the thickness of Carbon is too thin and it is soft.
It is well made! But it's a bit thin and not thick enough. It is soft. I'm satisfied with the manufacturing, but the texture makes it seem a little expensive.
However, the carbon parts and fittings of LaborWolf are always good, such as Fenders and Covers. It's just expensive.
But it is definitely better than Magny-Cours RACING. The other one is just a poorly made and expensive carbon. If you look at it through the light from the back, you can see that it's not very smooth, most of the parts can't be attached, the fitting is bad, sometimes damaged parts come, and the price is too high.
In this respect, KuLaborWolf is only expensive and well made!
My personal opinion is that both of them have bought a lot of Parts, so I would like to refer to them.
View detail
Was good (´ω`)
At first I wasn't sure if I could get it right, but once I tried it, I had no problem at all and it went on easily. (Lol) The quality was better than I expected. View detail
Some gaps are unfortunate.
I purchased this product to protect Tank.
The product's appearance and protective performance are very good.
Installation is also easy for anyone following the Instruction Manual.
However, when I installed it, there is a slight gap between the two, and I am concerned that water may enter through the gap when washing the car or when it rains.
Other than that, I have no complaints.
View detail
solidly built
of fine structure
That's what CLEVERWOLF is all about!
All hole positions are aligned.
There is no pulling and warping to stop it.
The disappointments are
GSX1300R HAYABUSA is not so conspicuous because of its large cowl.
When the Chain Cover is removed, a hole is left in the Swing Arm.
Bolt and Cutting sheet were used to block it.
View detail
Not made by Gold.
Refreshing around the Tail is a nice touch.
I don't like the Fender Eliminator made by Gold genus.
Mr. CLEVERWOLF is the only choice!
Installed previously on a K9 R1000.
I thought it was nice to Firmly
I've only had short tail cars recently.
It's been a while since we've had a Fender Eliminator.
Firmly in FRP of considerable thickness.
Installed with OEM Bolt
Number lighting is also Couplet-on!
Reflector is also a Spec. that OEMs use.
I use Carbon's Number base.
External Reflector.
I tried to use a larger number base for the top and bottom, but it was not possible.
You need to be careful when using Number base.
Oh, and the Reflector's Bracket is Gold (Aluminum?).
View detail
slightly reserved
Front side is short as described in the product description.
From the SIDE, there is a Fender claim, but from the front, the claim is modest.
Cool Material:Personally, I think it would be nice to see more from the front since it is Carbon Style, but this area is clearly a preference.
View detail
It purchases as the appearance and the object for crack prevention of a tank. however -- if the middle neighborhood pushes -- poco -- it seems that the form of some tank changes since poco is carried out It is the shin without becoming, if it beco
It purchases as the appearance and the object for crack prevention of a tank.
however -- if the middle neighborhood pushes -- poco -- it seems that the form of some tank changes since poco is carried out
It is the shin without becoming, if it becomes difficult to shift in front by it.
Although it is in double-stick tape, if PITATSU is not decided on by one shot, it will shift and will attach attachment.
moreover, tricot -- in color, since a sticker portion started, he cut and stuck the sticker on the same form.
View detail
New ModelGSX1300R HAYABUSA CLEVER WOLF CLEVERWOLF Front Fender
In NORMAL, the Nose was so long that the Fender would hit the wall or steel pole before the Tire, and I had to be careful when parking or locking the car.
The design is lighter than the NORMAL because it is carbon, and the edges are wrapped inward instead of being left uncut, giving it a high-end feel.
However, due to the internal winding, design, and nose shortening, the sound of air flowing from inside the Fender seems to reverberate at high speeds.
Obviously you can hear the co and go etc. sounds. (I don't mind)
View detail
It also prevents scratches and makes the tank area parenthesis better!
I just use double-sided tape to attach it, but it's difficult to decide on one shot because the tape that comes with it is too strong.
Is it here? And even if you install it "Oh! I got a little gap!" But it sticks from the edge and is almost impossible to reapply.
If you can pay attention to that and stick it on nicely, you'll have a cool Tank area!
I bought the twill weave, and I am very satisfied with its luster.
By the way, I'm attaching it together with the OEMTank Pad.
View detail
Fits: KAWASAKI Z800, KAWASAKI Ninja 1000, KAWASAKI Ninja 1000 SX, KAWASAKI Z1000
Wet carbon.
The design is good, not too much, but it's not dry carbon, it's wet carbon. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Practicality and appearance Up!
I used Tank Pad with Logo before, but I bought it so that Wound would not be attached to Tank by the interference of the hem of Fastener and the interference of the part which opened the lower part of Double zipper when I wore a long Jacket in winter. I was able to put it on without feeling uncomfortable because the basic shape is the same as the Chinese Cowl. I'm very happy with it, and I hope it's a little cheaper for my wallet; View detail
It's like an 8-resistant Spec. and I'm impressed!
I purchased this for a durable cowl after my OEM Cowl cracked
I was going to paint it myself, but I sent it to a painter to get it cleaned up It was
The exit part of the Exhaust System is Yoshimurafull Exhaust This is the system that needs to be modified including OEM products Because Mr. Lever's Fitting car did not have the Horn, we had to make the Horn part too Escape processing required The rest of the body fits well, and the maintenance with the Cowl off is thanks to the Quick fastener It's easier
Painting is done by KingsCostomPaint, who is working on the cars for TeamKagayama We asked the owner to make it a Replica painting Of course, I got permission from Yukiomi Kagayama, the owner, and made it as an official Replica I received it
The sense of ownership has increased by 100 percent over the OEM Black and I've spent more time in Garage
Wiring of the Het Light will light up if it is attached as it is
Please consult with Bright logic for more information and see what they have to say
View detail
It is Exactly!
Until the product was installed, I was honestly anxious. When I installed the product, it was exactly well though it was for ZrX 1200 DEG.
I remembered and added only with the enclosed Double-sided Tape, but I do not have any anxiety.
If possible, it will be saved if it is a bit cheaper, but it is difficult (^_-) - ☆
View detail
Appearance
Also looks like Material : Carbon Style is also good, is Double - sided Tape also comes with a 3M thing easy to attach easily.
I think that it is better to put a Tape on the upper side as much as possible because some clearance is formed at the top.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
There is a sense of stability.
Because the area for Tank is wide "Appearance" Quite to purchase
Although we could not step on, as a preventive measure of Wound.
Since the product traces the peculiar Line of Tank well
There was nothing to worry about with the installation point.
Stability after installation is perfect as well.
However, if there is no Logo mark in the product center
I feel better..
View detail
Reliable Manufacturer
Installation and handling I think the Instruction Manual is kind, easy to understand, reliable Manufacturer. Although the product feels expensive, I will endure it because it is Just fit. Large changeable satisfaction for 5000 yen fee. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Installation is a little Large
Design Texture is Parenthesis nice. Twill Weave Carbon There is a three-dimensional luxury. I sprayed a slightly diluted neutral detergent onto the Double-sided Tape pasted on the Reverse side. So you can adjust the position so I fixed it with Masking tape at the first place. I was stuck on the next day. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
I wonder if I should attach it from ahead of time - - -
I used Small Pacific Tank Pad, but when I made Jacket leather I rubbed it in Tank and it was blacked out so I did it.
Because the installation is done only with double-sided tape, so easy. Position only carefully.
View detail
Anyhow cool!
Since Jacket's Fastener scratches Tank, I think it is an essential Items if you want to continue riding beautifully
Compared with BugStar, here is Design is Simple and cool
The price is also about three times w
Easy to install
Just paste it with Double-sided Tape
It seems that the accuracy is also good, it could be attached without twisting or distorting strangely
I guard the fairly wide area up and down, so I think that scratches will not enter Tank even if you lower your upper body
Rather, this Tank protector is smart so I'm worried about scratching this w
View detail