Reviews
To extend the Socket.
The extension bar is essential for loosening and tightening the bolt nut in the back, and the socket is very smooth and easy to insert and remove. I am very satisfied with the price and performance of this product. View detail
Necessities for Motorcycle Maintenance
This Plug wrench is a must have for anyone doing their own maintenance on their motorcycle. View detail
You can't miss it for maintenance.
It can be used in combination with the Ratchet Handlebar for those hard to reach places. It is a cheap and convenient extension bar that is indispensable for maintenance. You can use it with confidence because you can hang the Torque firmly. View detail
Overpriced quality
If you are replacing your exhaust system with a full exhaust system, you will need this to loosen the nut on your exhaust manifold. The price is cheap but the effect is very Large. View detail
The sharpness is beyond the price.
The grip is easy to grip and you can put a lot of pressure on it, so it's easy to cut hard objects and the sharpness is very good. The price is very reasonable and the performance is more than enough for the price. View detail
Four Wheels for VehicleSpec.
When I inserted it into the Caliper of the two-wheeler, it went in to the tip, but not the whole surface. (There are pictures.)
I turned the Handlebar from there, but it takes a lot of force.
It was difficult to work with the Caliper hanging, so I removed the Caliper from the body.
View detail
It is easy to use
I bought it for Point and Tappet maintenance.
The 0.02mm was crumpled. It seems to be able to stand up to use somehow, but I wondered if this was a bad idea, even though it is a cheap one.
The oil-covered point is also annoying because it takes some time and effort to use.
Nevertheless, the cost performance is excellent, the measurements cover a wide area and the shape is very easy to use.
It's worth the price. It seems to be a problem for simple maintenance.
View detail
Convenient for pad replacement.
The Brake Caliper Pistons are easily pushed back in to replace the Brake Pads, which is less scratchy and more efficient than using Pliers to replace them. View detail
To adjust valve clearance
I bought it to adjust the Valve clearance on my ELIMINATOR 250
The EX250 Engine, which is also used in the current NINJA and VERSYS, is a mature engine After 60,000km, it started to make a nasty noise when idling and clattering
Thanks to this Gauge, it's now perfect and in good shape The size you need is not exactly the same as the size you need, but if you stack them up, it's not a problem Not at all
If I had to say, it's a little bit wide, so it's hard to get into the narrow IN cams, etc I even had a thought
Even TWIN is like this, so when you fiddle with InlineFour and other products, a slender, separate product You might want to choose
View detail
It's cheap!
It is used for Tappet clearance of GORILLAetc.4CycleEngine and I have
The price is low enough to save me a lot of money because I can't use it to measure Clearance because it gets worn out gradually
The gauge is made of a large size, but the gauge is made of a fixed metal clasp GORILLA, it's hard to use for MONKEY, so Size is stamped on it, too, so I'm going to have to make a stop If I remove it and set it to RoseRose, I can use it by shifting the position 4 or 5 times I am!
View detail
It's handy for pad replacement
When changing the brake pads, you can use the pliers on the four-wheeled Large Caliper with some creativity The piston was pushed in, but it is difficult to work on the small for motorcycles I bought it because
When the item arrives and you open the box, is it used? I think it's a bit of a scratch Well, I don't mind it because it is a tool
Because Lever is heavy and hard to turn as it is, after applying Grease to the moving parts, the work is done I worked on it and I managed to do the work
I think it's useful for those who often use cars and motorcycles in relation to Brake
View detail
The grip is comfortable
It's easy to use and fits in the palm of your hand The price is also affordable and the cost performance is good Because it is a driver of the size that goes into the palm of the hand, it is said that it is a driver that is very useful in a narrow place I think View detail
good
It is cheap and has high Cost performance. 1pc. If there is one it is an organism. I think that it will not be damaged by buying it. Tappet adjustment etc etc. I tried to use it for purchase. There were 23 peas, even if the car type changed, I bought it without any problem and I thought it would work. View detail
Tapered shape is Good
Motorcycle's Tappet is in the back, and the usual rectangular Thickness Gauge is hard to use. This product is superior to that point. However, it was somewhat disappointing that the thicker thing is slightly out of the Size range I would like to use. (I felt that I wanted Shift to a slightly thinner side. ) Naturally, it is essential to choose a Set whose thickness you want to use is covered beautifully. View detail
Large rinse
I bought it for car use Large rinse than I had thought.
Usability is not bad, so it is bulky, but I will put it in the Tool bag.
It is firmly made for the price. It is a tool that can be Recommendation if you do not mind Large
View detail
To return Caliper's Piston.
【What made you decide the purchase?】 Required
To return the Caliper piston at cleaning.
Previously, I was returning by hand, but since Piston was accidentally disconnected.
Cheap Prices.
【How was it actually used?】 Required
Just put it in Simple and rotate it. it's simple.
However, it is somewhat heavy and needs attention. With this you will not lose Piston w
[Is there anything I was disappointed about?] Required
heavy. Big.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Perhaps it is for 4 wheels, but I would appreciate it if you could put out items for two wheels.
【Have you compared items?】 Required
There are no products used for comparison.
[Others] Any
Be careful not to drop it as it is heavy as above. It will hurt injuries and Motorcycle. It would be nice to put it on a small table or the like.
View detail
It is a required tool
I bought it to make Valve clearance adjustment
It's easy to use because it is set finely
While paying attention not to rust, I would like to use it for the Large thing
View detail
Used for CUB90DX
Tappet sound has become considerable, so I tried to adjust and bought it.
Thickness Gauge was what I felt,
Tappet Looking at the site of the person who is adjusting, it was a tool to measure Clearance.
It was truly amazingly fluent and something like a plate, thought that I should use it like this.
This time 0. It is the use of 05 mm.
Since it enters in a bent state, it was easier to work than I thought, but since it is fluent at all, there are traces left when I tightened.
The price is not so expensive, I felt that Torque had uped when I adjusted Tappet, so I made a rating of 4.
View detail
[Webike Monitor] Since a product besides has not been used, the comment about ease of use is not made, but it can use ordinarily. It is a conclusive factor of purchase that there was 0.13 used by Motorcycle to own. Although there is much
[Webike Monitor] Since a product besides
has not been used, the comment about ease of use is not made, but it can use ordinarily.
It is a conclusive factor of purchase that there was 0.13 used by Motorcycle to own.
Although there is much
number of sheets, since there is 2 or 3 number of sheets used at present at most and there is, it does not think that it was profitable. [ much ]
It expects to be
, however to be useful some day!
View detail
Since pains was taken over a Piston putting back when Brake pads were exchanged before, it resulted in this purchase. The Piston was able to be easily put back by the engine performance as expected. However, it is very heavy! Although it may be a s
Since pains was taken over a Piston putting back when Brake pads were exchanged before, it resulted in this purchase.
The Piston was able to be easily put back by the engine performance as expected.
However, it is very heavy! Although it may be a strong proof, I think that it is what a little lighter one tends to work to.
Although it is
, on the whole, I hear that work becomes easy and it is very much satisfied with this price.
View detail